aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2011-10-13Add an interface file for DLP Design DLP-USB1232H.Uwe Hermann
The DLP Design DLP-USB1232H UART/SPI/JTAG module is based on an FTDI FT2232H chip. Among other things, it can used as JTAG programmer if connected to the JTAG target properly. I have successfully wired the module to an Olimex STM32-H103 eval board and flashed a firmware onto that using OpenOCD. The setup details and schematics are documented at: http://randomprojects.org/wiki/DLP-USB1232H_and_OpenOCD_based_JTAG_adapter Change-Id: I5eb9255a61eeece233009bee77d7dc3b5d1afb8b Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/20 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-13Add a board file for the Glyn Tonga2.Uwe Hermann
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB DDR SDRAM, 256MB NAND flash, and on-board Ethernet. The board file provides a tonga2_init function which sets up the PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader into RAM via JTAG. Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/19 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-03STM32L: Added flash driver and targetClément Burin des Roziers
Added the flash driver for the STM32L family, which highly differ from the STM32F family. Added the TCL target file for JTAG access.
2011-10-01Verdex: Add support for Gumstix Verdex boards.Ash Charles
Gumstix Verdex is a PXA270-based series of computer-on-modules. This configuration file is based off the voipac.cfg configuration with a different flash memory configuration. This has been tested flyswatter adapter to reflash a Gumstix Verdex XL6P board.
2011-09-30u8500 : config for L2 cacheMichel Jaouen
2011-09-30AM/DM37x: add ES1.2 silicon type into accountVladimir Zapolskiy
The missing value for ES1.2 silicon revision is mentioned in sprugn4m.pdf, and the recent TI Beagleboard XM is powered by it, so let support the revision.
2011-09-09Add definition for the STEVAL-PCC010 board with the STM32F207Uwe Bonnes
2011-08-30dsp568013 disable polling by defaultRodrigo L. Rosa
2011-08-25Add Valuline HD to config fileJonathan Dumaresq
This will add the BSTAP for the medium and high density devices
2011-08-24Fix redbee config filesJim Paris
Currently the board/redbee-*.cfg files incorrectly include the interface definition. Move the interfaces to interface/, and create a single board/redbee.cfg that is common to both boards. Intended usage is now: openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
2011-08-16versaloon driver updateSimonQian
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-02cfg: allow stellaris device class overrideB. A. Bryce
Some devices, eg. The Tempest class return the wrong device class when queried. Add the ability to manually override the device class. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-29cfg: support calling legacy stm32 scriptsSpencer Oliver
For the time being we support the old stm32 script names - this will be removed before the next release cycle. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28cfg: update scripts to use new stm32 driver namesSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-27cfg: add Fujitsu FM3 configSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-18CPU name in TMPA900 config file should obviously be TMPA900 (not TMPA910).Michael Hunold
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-15stm32f2xxx: comments about frequency choiceØyvind Harboe
2011-06-26Add ULINK interface scriptMartin Schmölzer
2011-06-16Added Olimex STM32 {H,P}107.cfg boardDale Lukas Peterson
2011-06-12added minimodule interfacerlrosa
2011-06-08Added configuration file for STM3220G-EVAL board.Laurent Charpentier
2011-06-08Added configuration file for stm32f2xxx.Laurent Charpentier
2011-06-02uptech2410Bear
2011-05-29Board definition for mini6410/tiny6410 (ARM1176)Damjan Marion
The following mini6410/tiny6410 functions are available: init_6410 - initialize clock, timer, DRAM init_6410_flash - initializes NAND flash support install_6410_uboot - copies u-boot image into RAM and runs it
2011-05-29SMDK6410 is not target, move file to boardDamjan Marion
2011-05-18flash support (only full erase/write) for 568013 and 568037Rodrigo L. Rosa
2011-05-18partial support for 568013 and 568037, target integration.Rodrigo L. Rosa
2011-05-05beagleboard: add support for various icepick versionsØyvind Harboe
The beagleboard icepick jtag tap id's vary.
2011-05-05at91rm9200-ek: add low default communication speedJonas Hoerberg
2011-05-03Add support for the lpc2460 targetAlexandre Pereira da Silva
2011-05-03Make the lpc2xxx generic driver support romless partsAlexandre Pereira da Silva
2011-04-28u8500.cfg : ste u8500 supportMichel Jaouen
2011-04-13Add preliminary support for Freescale iMX53Luca Ellero
Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-04-13Add the REV A tap id to the LPC3250 configurationAlexandre Pereira da Silva
2011-04-09at91: add at91sam9263 chip register definitionJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09at91: add chip register definition and generic init supportJean-Christophe PLAGNIOL-VILLARD
for - pio - pmc - rstc - wdt - sdramc - smc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09add at91sam9263-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09add at91sam9261-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09at91: add at91sam9261 chip register definitionJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-02pandaboard: use new -dbgbase option to workaround broken ROM tableØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22omap4430: cortex a9 and a8 are now merged againØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-13omap4430: add Blaze configAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13omap4430: force hardware breakpoints for GDBAaron Carroll
Soft breakpoints are currently broken if the MMU is enabled due to incorrect cache flushing. Until this is fixed, force the use of hardware breakpoints. Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-03at91: add at91sam9g45 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9g10 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9260: update sram informationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9263 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9261 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9: factorise cpu supportJean-Christophe PLAGNIOL-VILLARD
all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-23add at91rm9200-ek board supportJean-Christophe PLAGNIOL-VILLARD
tested with jlink sam-ice v5 while loading barebox (gdb) load Loading section .text, size 0x2f190 lma 0x21f00000 Loading section .rodata, size 0x931c lma 0x21f2f190 Loading section .data, size 0x29e8 lma 0x21f384ac Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94 Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620 Start address 0x21f00000, load size 243360 Transfer rate: 26 KB/sec, 13520 bytes/write. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 01:34:43 +0000