aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Expand)Author
2010-09-20AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun
2010-09-14board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron
2010-08-31cortex m3: add cortex_m3 reset_config cmdSpencer Oliver
2010-08-31cfg: update Luminary config filesSpencer Oliver
2010-08-19imx35pdk: fix clock and reset delaysØyvind Harboe
2010-08-17mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe
2010-08-16update more Stellaris EK board commentsDavid Brownell
2010-08-16Update comments for some Stellaris EK boards.David Brownell
2010-08-15avr32: basic target scriptOleksandr Tymoshenko
2010-08-15at32ap7000 config fileDavid Brownell
2010-08-13lpc1768: turn down the jtag clockØyvind Harboe
2010-08-13Added Lisa/L script as a target board.Piotr Esden-Tempski
2010-08-13Added support for Lisa/L builtin JTAG interface.Piotr Esden-Tempski
2010-08-12at91cap7a-stk-sdram.cfg: faster resetØyvind Harboe
2010-08-12DM36x: Set OSCDIV dividerThomas Koeller
2010-08-12DM36x: Disable unused SYSCLKsThomas Koeller
2010-08-12DM36x: Use enable bit for PLL pre-dividerThomas Koeller
2010-08-11tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe
2010-08-11board: added at91cap7a stk w/sdram config scriptsØyvind Harboe
2010-08-11config scripts: remove useless reference to OpenOCD docsØyvind Harboe
2010-08-10cfg: add omapl138 support and da850evm preliminary supportBen Gardiner
2010-08-03Luminary-icdi comment updateDavid Brownell
2010-08-02lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe
2010-08-01Support NGX Technologies product NGX ARM USB JTAGPeter Stuge
2010-08-01Remove srst_pulls_trst from LPC2148 targetPeter Stuge
2010-07-30lpc7168: make flash available upon reset initØyvind Harboe
2010-07-19cfg: add Amontec JTAGkey2p interface config (Issue #26)Spencer Oliver
2010-07-19flash: add nuc910 nand driverSpencer Oliver
2010-07-19cfg: update rsc-w910 scriptSpencer Oliver
2010-07-17lm3s811-ek uses generic stellaris target configDavid Brownell
2010-07-13cfg: add Avalue RSC-W910 configSpencer Oliver
2010-06-25at91sam3s* supportOlaf Lüke
2010-06-22am3517 evm: use physical write to memory while target is runningØyvind Harboe
2010-06-22board: add alpha am3517evm ti board config fileØyvind Harboe
2010-06-15DM36x: pll & clock setupThomas Koeller
2010-06-15arm1136 scriptsmichal smulski
2010-05-26cfg: add pic32 virtual banksSpencer Oliver
2010-05-24There are no variants of arm7tdmi targetFreddie Chopin
2010-05-24All LPC2xxx chips are little endian and that cannot be changed - update confi...Freddie Chopin
2010-05-24add correct CPUTAPID value for LPC2129Freddie Chopin
2010-05-24Update "flash bank" helper comments for LPC2xxx chipsFreddie Chopin
2010-05-24LPC23xx and LPC24xx after reset run on internal 4MHz RC oscillator, so "flash...Freddie Chopin
2010-05-21at91sam9260: use RCLKØyvind Harboe
2010-05-21cfg: update stm32 performance stick configSpencer Oliver
2010-05-21board: dm355evm.cfg SDTIMR0/1 minor naming fixJon Povey
2010-05-19reset: fix reset halt bugGary Carlson
2010-05-18at91rm9200 : reset_config should go to the board config fileMarc Pignat
2010-05-13scripts: update flash bank namesSpencer Oliver
2010-05-12zy1000.cfg: gdb connect will fail first time without gdb-attachØyvind Harboe
2010-05-07cfg: add stm32eval board configsSpencer Oliver
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 17:40:44 +0000