aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2011-08-02cfg: allow stellaris device class overrideB. A. Bryce
Some devices, eg. The Tempest class return the wrong device class when queried. Add the ability to manually override the device class. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-29cfg: support calling legacy stm32 scriptsSpencer Oliver
For the time being we support the old stm32 script names - this will be removed before the next release cycle. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-28cfg: update scripts to use new stm32 driver namesSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-27cfg: add Fujitsu FM3 configSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-18CPU name in TMPA900 config file should obviously be TMPA900 (not TMPA910).Michael Hunold
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-15stm32f2xxx: comments about frequency choiceØyvind Harboe
2011-06-26Add ULINK interface scriptMartin Schmölzer
2011-06-16Added Olimex STM32 {H,P}107.cfg boardDale Lukas Peterson
2011-06-12added minimodule interfacerlrosa
2011-06-08Added configuration file for STM3220G-EVAL board.Laurent Charpentier
2011-06-08Added configuration file for stm32f2xxx.Laurent Charpentier
2011-06-02uptech2410Bear
2011-05-29Board definition for mini6410/tiny6410 (ARM1176)Damjan Marion
The following mini6410/tiny6410 functions are available: init_6410 - initialize clock, timer, DRAM init_6410_flash - initializes NAND flash support install_6410_uboot - copies u-boot image into RAM and runs it
2011-05-29SMDK6410 is not target, move file to boardDamjan Marion
2011-05-18flash support (only full erase/write) for 568013 and 568037Rodrigo L. Rosa
2011-05-18partial support for 568013 and 568037, target integration.Rodrigo L. Rosa
2011-05-05beagleboard: add support for various icepick versionsØyvind Harboe
The beagleboard icepick jtag tap id's vary.
2011-05-05at91rm9200-ek: add low default communication speedJonas Hoerberg
2011-05-03Add support for the lpc2460 targetAlexandre Pereira da Silva
2011-05-03Make the lpc2xxx generic driver support romless partsAlexandre Pereira da Silva
2011-04-28u8500.cfg : ste u8500 supportMichel Jaouen
2011-04-13Add preliminary support for Freescale iMX53Luca Ellero
Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-04-13Add the REV A tap id to the LPC3250 configurationAlexandre Pereira da Silva
2011-04-09at91: add at91sam9263 chip register definitionJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09at91: add chip register definition and generic init supportJean-Christophe PLAGNIOL-VILLARD
for - pio - pmc - rstc - wdt - sdramc - smc Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09add at91sam9263-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09add at91sam9261-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09at91: add at91sam9261 chip register definitionJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-02pandaboard: use new -dbgbase option to workaround broken ROM tableØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22omap4430: cortex a9 and a8 are now merged againØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-13omap4430: add Blaze configAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-13omap4430: force hardware breakpoints for GDBAaron Carroll
Soft breakpoints are currently broken if the MMU is enabled due to incorrect cache flushing. Until this is fixed, force the use of hardware breakpoints. Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-03at91: add at91sam9g45 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9g10 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9260: update sram informationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9263 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9261 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9: factorise cpu supportJean-Christophe PLAGNIOL-VILLARD
all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-23add at91rm9200-ek board supportJean-Christophe PLAGNIOL-VILLARD
tested with jlink sam-ice v5 while loading barebox (gdb) load Loading section .text, size 0x2f190 lma 0x21f00000 Loading section .rodata, size 0x931c lma 0x21f2f190 Loading section .data, size 0x29e8 lma 0x21f384ac Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94 Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620 Start address 0x21f00000, load size 243360 Transfer rate: 26 KB/sec, 13520 bytes/write. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-18stm32: add ID for medium density device Rev ZLuca Ellero
stm32-discovery evaluation board (STM32F100RBTB6): reading device id register (0xE0042000) returns 0x10010420 Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-08omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms)Luca Ellero
PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID. This patch add alternate REV EA1 TAP id to configuration file Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-02omap4430: fix reset sequenceAaron Carroll
* Write to the PRM reset control register should have been 'phys'; * Setup empty reset-assert handlers for the M3's, since the board-level reset takes care of them; * Remove the dbginit cruft, because it gets called implicitly on reset. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31TCL configs for OMAP4430 and PandaboardAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-27- add xds100v2 configuaration fileMathias K
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-09Add another level of procedures to LPC2xxx initialization - procedures for ↵Freddie Chopin
specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-07Add common LPC2xxx setup procedure, use in all LPC2xxx files.Freddie Chopin
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-02actux3.cfg: add function to setup for u-boot debuggingMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2010-12-23stm32: add stm32 xl family flash supportSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-22lpc2148: redo to the new target configuration schemeØyvind Harboe
Define a proc which PCBs can easily override. Also demonstrates how to add multiple TAP exepcted-id's using arguments. Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon I happened to have on my desk? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-20tcl/interface/flashlink.cfg: Fix broken ST URLTormod Volden
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 01:20:39 +0000