aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2015-04-14turtelizer2-revC: Tested with real hardware.Uwe Bonnes
Also some hints around deprecated tcl/interface/turtelizer2.cfg added. Change-Id: Ifa57b49febffaeddd5d8ff0a48833d3544927b10 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2584 Tested-by: jenkins Reviewed-by: Harald Kipp Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl/board: Add Infineon XMC 2Go configAndreas Färber
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jan 10 2014 20:31:33". Change-Id: Iefa9185372341d889db2b5f1f93bce126450b535 Cc: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2564 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/board: Add Infineon XMC1100 Boot Kit configAndreas Färber
Tested with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26". Change-Id: Icc03172cefe38f2217bf44a73f94f8a6fb93dfba Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2472 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/target: Add Infineon XMC1000 family target configAndreas Färber
Basic target config, verified against XMC1100 AA/AB, XMC1200 AA/AB, XMC1300 AA/AB manuals. The default adapter_khz was tested with the XMC1100 Boot Kit. Change-Id: Iff6ed52d875ccb83c0d4ff0d555b90e0f28b860c Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/board: Add Spansion SK-FM4-176L-S6E2CC configAndreas Färber
Works best after update to firmware v2.3. Change-Id: Id2d3a0ae28bba014ee5338df9280fe39773c3398 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2570 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/target: Add Spansion FM4 configAndreas Färber
Assembled by trial-and-error for an S6E2CC. Change-Id: I317c12d24c9075ce3de286455fa3ee45731c5c81 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2569 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14em357: Corrected EM357 support including errata detailsEd Beroset
Original submitted code had only been tested with em358, but testing with actual em357 revealed errors that this patch corrects. Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb Signed-off-by: Ed Beroset <beroset@ieee.org> Reviewed-on: http://openocd.zylin.com/2581 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/interface/parport: default to sane value on non-windows systemsPaul Fertser
When using ppdev driver 0 is the most appropriate default value as it corresponds to /dev/parport0. Raw port address is suitable only for direct access (I think that's parport-giveio on windows). Reported by danitool on IRC. Change-Id: I983c22251de6601b433ad31aaf660fb664cee7e9 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2572 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/board: Add Infineon XMC4500 Relax Kit configJeff Ciesielski
Tested with "J-Link Lite-XMC4000 Rev.1 compiled Dec 7 2012 19:23:07" on XMC4500 Relax Lite Kit V1. Change-Id: Ib680a444fa4cadbf640afba15d607c0e6bd4ab2c Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2567 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/board: Add Infineon XMC4200 Application Kit configJeff Ciesielski
Change-Id: I3a946ba3745da651d470cd574222ba5c7147ac9d Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2566 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/board: Add Infineon XMC4500 Application Kit configsAndreas Färber
Tested CPU_45A-V2 (General Purpose) with ARM-USB-TINY-H (via SWD) and with "J-Link Lite-Cortex-M V8 compiled Jul 17 2014 11:40:12" firmware. Tested CPU_45B-V1-006 (SDRAM) with ARM-USB-TINY-H (via SWD) and with "J-Link Lite-XMC4200 Rev.1 compiled Jul 18 2014 17:28:26" firmware. Change-Id: I3451117606551671ec77722f6adf7d7a6a4bd576 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2481 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/target: Add Infineon XMC4000 family configAndreas Färber
Base config, verified against XMC4500, XMC4400 and XMC4100/XMC4200 manuals. Change-Id: I10907bdf307bc6d11dc5454bf5391758de49dc30 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2480 Tested-by: jenkins Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl: icepick: add icepick_d_set_coreidFelipe Balbi
this is just to avoid open coding that in icepick_d_tapenable. Cleanup only, no functional changes. Change-Id: Iabd20291b7bdd95957afa1c74f52171789201227 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2624 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: icepick: call icepick_c_setupFelipe Balbi
it also works on icepick_d. Change-Id: I50c0c81286aae673c94ea77e47454ff48eab1668 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2623 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: icepick: switch over to icepick_c_routerFelipe Balbi
Reusing what's already there to ease maintainability. Change-Id: I2030581669c644e2d9d9f9968075ab6344445d04 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2622 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x: pass coreidFelipe Balbi
This commit is only for the sake of completeness as default coreid is zero. In any case, coreids 1-4 are used for the different PRU cores inside the SoC. Change-Id: I775f2f444b1a908ffaf7bdbc43bcc966f19668c4 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2621 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: am437x: use more descriptive namesFelipe Balbi
Use more descriptive names for JRC and DAPs so they more closely match documentation. For example there's no Cortex A9 DAP, that's the DebugSS DAP where Cortex A9 target sits. In that same DAP we have have ETM, STM and both dual-PRU subsystems. Change-Id: I0e66ebb6299763f96606fae3e4c62e5785c804f2 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2620 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: am437x: fix DebugSS DAP IDFelipe Balbi
Main DAP (where Cortex A9 sits) ID is actually 0x46b6902f. Fix it. Change-Id: Ifa3335186bcf60d264d4ecea477bfe2f5ca10ead Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2619 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: board: add AM437x IDK supportFelipe Balbi
Add support for Texas Instruments AM437x Industrial Development Kit support. Change-Id: I33ed71c7392c3805a86cf2c8adce83c0e8aa323d Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2617 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: add reset-init event handlerFelipe Balbi
this event handler will configure and lock PLLs and configure DDR so platform is placed in usable state. Change-Id: Idd02f4c9789181d69578f8606ac3576ea1dd8a0b Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2616 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: disable watchdog on reset-endFelipe Balbi
sometimes, watchdog might be left running and it could expire in the middle of a debug session, to prevent that, just make sure to disable watchdog on reset-end if current state is 'halted'. Change-Id: Ib4f2a2321cba17cd8c56ca3ae63114a563a6de90 Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2615 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: define registers to be used laterFelipe Balbi
a later commit will implement a proper reset-init handler to lock pll and configure ddr as we should. Change-Id: I432cf28a5a944bfa83c20aed7298dbd29df30e38 Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2614 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: board: ti_am43xx_evm: follow xds100v2 requirementsFelipe Balbi
xds100v2 asks us to call these three commands to guarantee proper behavior, so do it. Change-Id: Iecf9c148ce7c2082ef915b46eeb511ceea395cc3 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2613 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: board: ti_am437x_evm: select jtag transportFelipe Balbi
default already is jtag, but this silences a warning during startup. Change-Id: I94478327bbb259649500ef74a5b5c10d51e2a517 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2612 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x: use entire SRAM areaFelipe Balbi
According to AM4379 TRM [1], table 2-1 L3 Memory Map, we have a total of 256KiB and there's no reason not to use it all. [1] http://www.ti.com/lit/ug/spruhl7b/spruhl7b.pdf Change-Id: I117f2afe721bc4e3f0df304d3542e1a91aa69d12 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2611 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x.cfg: pass correct dbgbaseFelipe Balbi
Since commit ec9ccaa28849 (arm_adi_v5: make dap_lookup_cs_component() traverse subtables and handle multicore) AM437x devices can't be used with OpenOCD anymore. The reason is that dbgbase used to be set to zero before that commit and that just happens to work with AM437x devices. A more robust solution is to pass correct dbgbase when creating the target, which this commit does. Signed-off-by: Felipe Balbi <balbi@ti.com> Change-Id: Iaf2617804324de8094b25137943e08b84f14c75f Reviewed-on: http://openocd.zylin.com/2602 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-25Add configuration for EFM32 Gecko boards with Segger J-Link.Uwe Bonnes
Tested with Tiny Gecko. Change-Id: Iddb87170b6aaaf7f15d3c4517c8661dd6394be8f Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2585 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25transport: make 'transport select' auto-select the first available transport ↵Angus Gratton
if not set This should allow most of the existing configurations for older versions to remain compatible without forcing the user to change his or her config to explicitly select transport. Also in some circumstances can remove the need to chain a "-c transport select X" when building custom configs on the command line, which seems like a common new user pitfall. Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2551 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25drivers/cmsis-dap: port to common SWD frameworkPaul Fertser
Valgrind-tested. Comparison of flashing performance on an FRDM-KL25Z board running mbed CMSIS-DAP variant, 5MHz clock, old driver: wrote 28096 bytes from file demo.elf in 26.833590s (1.023 KiB/s) verified 27264 bytes in 1.754972s (15.171 KiB/s) this implementation: wrote 28096 bytes from file demo.elf in 3.691939s (7.432 KiB/s) verified 27264 bytes in 0.598987s (44.450 KiB/s) Also tested "Keil ULINK-ME CMSIS-DAP" with an STM32F100 target, 5MHz clock, results reading from flash, old driver: dumped 131072 bytes in 98.445305s (1.300 KiB/s) this implementation: dumped 131072 bytes in 8.242686s (15.529 KiB/s) Change-Id: Ic64d3124b1d6cd9dd1016445bb627c71e189ae95 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2356 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25tcl/board/twr-k60f120m: remove useless flash bank 0 definitionPaul Fertser
Since the very first flash bank is already defined in target/kx.cfg, there's no sense in repeating it. Reported and tested by Richard Braun. Change-Id: I417b7072b5e6675ddbf824446e7581b8b7da8f4b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2595 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
This provides support for various trace-related subsystems in a generic and expandable way. Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2538 Tested-by: jenkins
2015-03-10stm32l1.cfg: Add missing dash to fix f7394049d3 commit.Uwe Bonnes
Change-Id: Ifeb2d4fc2b43813edbc6fe2cf08bfd4c55cd1e86 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2590 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Stian Skjelstad <stian@nixia.no>
2015-03-09tcl: Add default hooks for STM32F3xAndreas Fritiofson
Keep clocks running in low power modes. Stop watchdogs from interfering with the debug session. Set up PLL and increase clock at reset init. Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2196 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09tcl/interface/ftdi/xdsv2: fix and clarify EMU* signalsMatthijs van Duin
The signal names are changed for consistency with TI's docs and sources. Change-Id: Ic5c5314daa20f6f610be8a848399f951d47aa137 Signed-off-by: Matthijs van Duin <matthijs@rinnic-vaude.nl> Reviewed-on: http://openocd.zylin.com/2231 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09stm32l1.cfg: Add ID Code of Cat.2 devices.Uwe Bonnes
Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2517 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2015-03-09stm32f3x.cfg: Remove duplicate item.Uwe Bonnes
Change-Id: I812c36688add73fab2e74fc112c733c5d3c201a6 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2554 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09lpc2000: Add LPC407x/8x flash size auto detectionNemui Trinomius
This patch adds auto flash size detection for LPC407x/8x series. Tested on below listed chips. LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-03-09target & board: AT91SAM7A2 and Olimex SAM7-LA2Arne Wichmann
Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board. The board seems not to be able to reset into halted mode, as srst is connected to NRESET of the cpu (configured srst_pulls_trst). JTAG RCLK is connected to CLK. Tested with interface/ftdi/olimex-arm-usb-ocd-h.cfg. Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8 Signed-off-by: Arne Wichmann <arne.wichmann@gmail.com> Reviewed-on: http://openocd.zylin.com/2318 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2465 Tested-by: jenkins
2015-02-22Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.Uwe Bonnes
The F334 disco board has a stlink V.2-1 as F3 nucleo boards. Normal F3 disco boards use stlink v2 and can't ne used. Change-Id: I77ebef93b184592f25ff18bb2da776d636f60ff0 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2434 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22tcl/target|board: add configs for Alphascale asm9260tOleksij Rempel
This adds configs for Alphascale asm9260t ARM based SoC and Evaluation Kit based on this chip. Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2515 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: Fix Kinetis kwikstik/kx configAndreas Fritiofson
The flash definition belongs in the target cfg. Add some working area and suitable reset_config. Make kx.cfg more similar to klx.cfg. Disable rclk as it is dead slow and a fixed 1MHz clock seems to work. Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2227 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
Configure the LED to be off by default, blink on activity. Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2539 Tested-by: jenkins
2015-02-11sim3x: new flash driver for Silabs SiM3 microcontroller familyAndreas Bomholtz
This is a new driver for Silicon Laboratories SiM3 microcontroller family, based on the work of Ladislav Bábel. The driver will try to detect the type of MCU from the device id register, and if this fails it will use the flash size from the flash bank command. Driver added to the documentation and to the README. TCL script added. Tests: * Hardware: SiM3C166 (pre-production) and SiM3U167 * Binary: 4kb, 197kb, 256kb * Flash protect not tested Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2078 Tested-by: jenkins
2015-02-11nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2 from ↵Angus Gratton
~3.5KiB/s to ~19.5KiB/s. Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04 Signed-off-by: Angus Gratton <gus@projectgus.com> [spamjunkeater@gmail.com: Cleanup buffer allocation, detect -1 for unknown pages] Signed-off-by: Erdem U. Altunyurt <spamjunkeater@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2204 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11J-Link serial number config optionJoerg Fischer
Add serial option to jlink config commands, handy when there is more than one adapter connected. To select adapter 0123456 for OpenOCD, use jlink serial 0123456 Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/2521 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl: add TP-LINK TL-MR3020 to the firmware recovery scriptOleksij Rempel
This adds the board to the list of supported devices for the easy recovery procedure. Only ram_boot is supported for this target. Change-Id: I144e1836f8b6257e96a42c98c2668da74ce243f6 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2520 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-02-11tcl/target|board: add config Atheros ar9331Oleksij Rempel
Add configs for Atheros ar9331 MIPS based WiSoC and board based on this chip: TP-LINK TL-MR3020 Change-Id: I9e99719bce4bbb28311f6e9cddb32288db6e7b91 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2519 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11mini51: support for Nuvoton NuMicro M051 series flash memoryPawel Si
adds flash support for Nuvoton M052, M054, M058, M0516 microcontrollers into the mini51 driver, patch also adds support for programing LDROM, flash data and flash config. I've tested it on a M0516LBN microcontroller using an ST-LINK/V2: 1. removing security lock: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "init ; halt ; mini51 chip_erase; exit" 2. flashing: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "program file.hex" Change-Id: I918bfbb42461279c216fb9c22272d77501a2f202 Signed-off-by: Pawel Si <stawel+openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/2426 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure)Jacob Palsson
Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-22 00:10:36 +0000