aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2010-11-05CortexA8: Introduce Freescale i.MX51 variantMarek Vasut
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU has the Debug Access Port located at a different address (0x60008000) than TI OMAP3 series of CPUs. i.MX51 configuration file based on OMAP3 configuration file and an email from Alan Carvalho de Assis <acassis@gmail.com>. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-28imx31pdk: use rclk w/1MHz fallbackØyvind Harboe
measure_clk indicates ca. 3-4MHz, so 1MHz should be safe. Added self_test proc used to test that rclk worked. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-25Make systesetreq typos read sysresetreq insteadPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25Remove srst_pulls_trst from LPC1768 targetPeter Stuge
srst_pulls_trst may be true on some (broken) LPC1768 boards but is not true in general for the LPC1768. Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-10swj-dp.tcl (SWD infrastructure #1)David Brownell
Provide new helper proc that can set up either an SWD or JTAG DAP based on the transport which is in use -- mostly for SWJ-DP. Also update some SWJ-DP based chips/targets to use it. The goal is making SWD-vs-JTAG transparent in most places. SWJ-DP based chips really need this flexible configuration to cope with debug adapters that support different transports, without needing new target configs for each transport or adapter. For JTAG-DP, callers will use "jtag newtap" directly, as today; only one chip-level transport option exists. For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly (part of an upcoming SWD transport patch). Again, only one transport option exists, so hard-wiring is appropriate there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-09-28TCL scripts: fix ocd_mem2array/mem2arrayAntonio Borneo
In previous patch, I have introduced again the symbol "ocd_mem2array", now replaced by "mem2array". Fix the error. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-26Fix omap3_dbginit to write to physical memory.Zachary T Welch
Setting the OMAP3530 DBGEN bit must be done in physical memory, so update omap3_dbginit callback to use the new 'mww phys' command syntax.
2010-09-21TCL scripts: collect duplicated proceduresAntonio Borneo
TCL procedures mrw and mmw, originally in DaVinci target code, are duplicated in other TCL scripts. Moved in a common helper file, and added help/usage description. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-20tcl: remove incomplete unused tcl fileØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun
2010-09-14board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron
the new Marvell PXA270M processor has a new TAPID: 0x89265013. Attached you will find a patch for target/pxa270.cfg that will handle this. I have also attached a board/colibri.cfg file to support the Colibri PXA270 module by Toradex. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-31cortex m3: add cortex_m3 reset_config cmdSpencer Oliver
This new cmd adds the ability to choose the Cortex-M3 reset method used. It defaults to using SRST for reset if available otherwise it falls back to using NVIC VECTRESET. This is known to work on all cores. Move any luminary specific reset handling to the stellaris cfg file. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31cfg: update Luminary config filesSpencer Oliver
- Update all Luminary config's to use a common target/stellaris.cfg. - Add Luminary ek-lm3s6965 config. - Increase working area for boards with more ram. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-19imx35pdk: fix clock and reset delaysØyvind Harboe
Use rclk and 100ms delay on ntrst Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-17mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe
Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-16update more Stellaris EK board commentsDavid Brownell
Using the bundled JTAG/SWD debug support in JTAG mode is optional on *all* of the EK boards. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-16Update comments for some Stellaris EK boards.David Brownell
These don't need to use the on-board debuggers in JTAG mode. Off-board is OK, as would be SWD mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-15avr32: basic target scriptOleksandr Tymoshenko
2010-08-15at32ap7000 config fileDavid Brownell
nice board to play with.
2010-08-13lpc1768: turn down the jtag clockØyvind Harboe
Tests should that it needs to be as low as 100kHz to be stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-13Added Lisa/L script as a target board.Piotr Esden-Tempski
2010-08-13Added support for Lisa/L builtin JTAG interface.Piotr Esden-Tempski
2010-08-12at91cap7a-stk-sdram.cfg: faster resetØyvind Harboe
crank up JTAG speed as soon as clocks are set up. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-12DM36x: Set OSCDIV dividerThomas Koeller
The ability to set up the OSCDIV divider was missing. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12DM36x: Disable unused SYSCLKsThomas Koeller
Clear the enable bits for all clocks that are not set explicitly. This is done to increase robustness by removing pre-existing state. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12DM36x: Use enable bit for PLL pre-dividerThomas Koeller
The PLL pre- and postdividers seem to have enable bits, although these are not mentioned in the chip documentation. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-11tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe
ocd_ prefix is used internally in OpenOCD as a kludge more or less to deal with the two kinds of commands that OpenOCD has. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11board: added at91cap7a stk w/sdram config scriptsØyvind Harboe
The strange thing here with this board is that 16MHz kinda works, but only 2MHz is really stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11config scripts: remove useless reference to OpenOCD docsØyvind Harboe
clutters config scripts. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-10cfg: add omapl138 support and da850evm preliminary supportBen Gardiner
This patch adds support for the omapl138 target and preliminary support for the da850evm. The target cfg file is based on the icepick routing done by the target/ti_dm6446.cfg file. I have performed limited testing with this setup. I am posting this patch in the interest of sharing cfg files and in the hopes that the experts on this list can correct errors I have made or point out enhancements. The testing I have performed is debugging uboot with gdb where I also use the following local.cfg and gdbinit files. Debugging appears to work in so much as 'ni' works. local.cfg: gdb_memory_map disable gdbinit: target remote localhost:3333 set remote hardware-breakpoint-limit 2 set remote hardware-watchpoint-limit 2 monitor poll on Comments welcome. Best Regards, Ben Gardiner
2010-08-03Luminary-icdi comment updateDavid Brownell
Clarify that ICDI is the generic logic, but this config is for the JTAG-only (no-SWD) mode. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-08-02lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe
rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-01Support NGX Technologies product NGX ARM USB JTAGPeter Stuge
This is a standard FT2232 device. More info at their web page: http://shop.ngxtechnologies.com/product_info.php?cPath=26&products_id=30
2010-08-01Remove srst_pulls_trst from LPC2148 targetPeter Stuge
srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact which is already documented in doc/openocd.texi, so it shouldn't be set unconditionally in the target tcl. This patch was needed to reflash when an Abort exception occured very early after reset, before OpenOCD tried to halt the CPU.
2010-07-30lpc7168: make flash available upon reset initØyvind Harboe
set user mode to avoid ROM being mapped at address 0 rather than flash. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-07-19cfg: add Amontec JTAGkey2p interface config (Issue #26)Spencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19flash: add nuc910 nand driverSpencer Oliver
This adds a nand driver support for the nuc910 target. Note that ECC is not currently supported by this driver, although it is supported by the peripheral. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19cfg: update rsc-w910 scriptSpencer Oliver
- Only enable the FMI (NAND) and DMA clocks. - Select NAND interface on the MFSEL. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-17lm3s811-ek uses generic stellaris target configDavid Brownell
There's no point in an lm3s811-specific target file, so remove it in favor of the generic "stellaris.cfg". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-13cfg: add Avalue RSC-W910 configSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-06-25at91sam3s* supportOlaf Lüke
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-22am3517 evm: use physical write to memory while target is runningØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-22board: add alpha am3517evm ti board config fileØyvind Harboe
Signs of life: reset(kinda), halt, resume and memory display/modify. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15DM36x: pll & clock setupThomas Koeller
Added a function 'pll_v03_setup' to set up PLLs and clock dividers on DM365 and DM368. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15arm1136 scriptsmichal smulski
Here is a patch to fix a startup in C100 (arm1136). Basically make sure that UART is configured before using it. Michal Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-26cfg: add pic32 virtual banksSpencer Oliver
make use of the new virtual bank flash driver. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24There are no variants of arm7tdmi targetFreddie Chopin
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24All LPC2xxx chips are little endian and that cannot be changed - update ↵Freddie Chopin
config scripts Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24add correct CPUTAPID value for LPC2129Freddie Chopin
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24Update "flash bank" helper comments for LPC2xxx chipsFreddie Chopin
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 11:32:13 +0000