aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2015-03-09lpc2000: Add LPC407x/8x flash size auto detectionNemui Trinomius
This patch adds auto flash size detection for LPC407x/8x series. Tested on below listed chips. LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-03-09target & board: AT91SAM7A2 and Olimex SAM7-LA2Arne Wichmann
Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board. The board seems not to be able to reset into halted mode, as srst is connected to NRESET of the cpu (configured srst_pulls_trst). JTAG RCLK is connected to CLK. Tested with interface/ftdi/olimex-arm-usb-ocd-h.cfg. Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8 Signed-off-by: Arne Wichmann <arne.wichmann@gmail.com> Reviewed-on: http://openocd.zylin.com/2318 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2465 Tested-by: jenkins
2015-02-22Provide genuine F3 nucleo config and source it for STM32F334 Discovery board.Uwe Bonnes
The F334 disco board has a stlink V.2-1 as F3 nucleo boards. Normal F3 disco boards use stlink v2 and can't ne used. Change-Id: I77ebef93b184592f25ff18bb2da776d636f60ff0 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2434 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22tcl/target|board: add configs for Alphascale asm9260tOleksij Rempel
This adds configs for Alphascale asm9260t ARM based SoC and Evaluation Kit based on this chip. Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2515 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: Fix Kinetis kwikstik/kx configAndreas Fritiofson
The flash definition belongs in the target cfg. Add some working area and suitable reset_config. Make kx.cfg more similar to klx.cfg. Disable rclk as it is dead slow and a fixed 1MHz clock seems to work. Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2227 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
Configure the LED to be off by default, blink on activity. Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2539 Tested-by: jenkins
2015-02-11sim3x: new flash driver for Silabs SiM3 microcontroller familyAndreas Bomholtz
This is a new driver for Silicon Laboratories SiM3 microcontroller family, based on the work of Ladislav Bábel. The driver will try to detect the type of MCU from the device id register, and if this fails it will use the flash size from the flash bank command. Driver added to the documentation and to the README. TCL script added. Tests: * Hardware: SiM3C166 (pre-production) and SiM3U167 * Binary: 4kb, 197kb, 256kb * Flash protect not tested Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2078 Tested-by: jenkins
2015-02-11nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2 from ↵Angus Gratton
~3.5KiB/s to ~19.5KiB/s. Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04 Signed-off-by: Angus Gratton <gus@projectgus.com> [spamjunkeater@gmail.com: Cleanup buffer allocation, detect -1 for unknown pages] Signed-off-by: Erdem U. Altunyurt <spamjunkeater@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2204 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11J-Link serial number config optionJoerg Fischer
Add serial option to jlink config commands, handy when there is more than one adapter connected. To select adapter 0123456 for OpenOCD, use jlink serial 0123456 Change-Id: Ib29ce3f0c4975e1169211721a4531bf4db61f1ee Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/2521 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl: add TP-LINK TL-MR3020 to the firmware recovery scriptOleksij Rempel
This adds the board to the list of supported devices for the easy recovery procedure. Only ram_boot is supported for this target. Change-Id: I144e1836f8b6257e96a42c98c2668da74ce243f6 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2520 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-02-11tcl/target|board: add config Atheros ar9331Oleksij Rempel
Add configs for Atheros ar9331 MIPS based WiSoC and board based on this chip: TP-LINK TL-MR3020 Change-Id: I9e99719bce4bbb28311f6e9cddb32288db6e7b91 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2519 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11mini51: support for Nuvoton NuMicro M051 series flash memoryPawel Si
adds flash support for Nuvoton M052, M054, M058, M0516 microcontrollers into the mini51 driver, patch also adds support for programing LDROM, flash data and flash config. I've tested it on a M0516LBN microcontroller using an ST-LINK/V2: 1. removing security lock: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "init ; halt ; mini51 chip_erase; exit" 2. flashing: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "program file.hex" Change-Id: I918bfbb42461279c216fb9c22272d77501a2f202 Signed-off-by: Pawel Si <stawel+openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/2426 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure)Jacob Palsson
Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11em357: added target files for em357 and em358Ed Beroset
This patch adds support for Silicon Labs (formerly Ember) EM357 and EM358 chips and derivatives. Change-Id: Ie63aed95a2f4ef1a6b955e301a51b4de1b3a5462 Signed-off-by: Ed Beroset <beroset@ieee.org> Reviewed-on: http://openocd.zylin.com/2470 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11cfg: TI Tiva C dk-tm4c129x Evaluation KitsHeinz Schweiger
New Texas Instruments Tiva C Series Boards http://www.ti.com/tool/dk-tm4c129x Change-Id: I44f96982e91786b977b3d29e0f4c7053d584a703 Signed-off-by: Heinz Schweiger <openocd@htl-steyr.ac.at> Reviewed-on: http://openocd.zylin.com/1867 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek
New NOR flash driver was derived from stm32lx. Procedure ocd_process_reset_inner is overriden in psoc4.cfg to handle reset halt and system ROM peculiarities. Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2282 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2503 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2435 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-30tcl/target: add lpc8xx.cfgPaul Fertser
This adds a trivial config for LPC8xx chips based on the already existing infrastructure in lpc1xxx.cfg. Change-Id: I7384df1f3c2e3e8ab767319728db5c4f8149480f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2464 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2015-01-26tcl/board: frdm kinetis boards have SRST connectedPaul Fertser
Change-Id: I1a56b5e9d1ac6466bba11cc694ee3eaa2c9b504f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2462 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26tcl/target/stellaris: Snowflake supports SYSRESETREQ tooPaul Fertser
Change-Id: If4bf472ab8867c54a976bdb5803f7e4f79f350a8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2461 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Ed Beroset <beroset@ieee.org>
2015-01-26tcl/target: consolidate Kinetis configsPaul Fertser
Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2460 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26tcl/board: Add ST NUCLEO L152RE configurationThomas Eichinger
Added support for the ST nucleo l152re board with a stm32l152ret6 MCU, analog to st_nucleo_f* configurations. Change-Id: Id2c61dc7a7cb2e1cc64442191b367bab4247bdeb Signed-off-by: Thomas Eichinger <eicht@lepus.uberspace.de> Reviewed-on: http://openocd.zylin.com/2489 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26cfg: add srst_nogate to the supported targets, remove from board configsPaul Fertser
It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26stm32f4/nucleo: Use only one configuration for all stm32f4 nucleo boards.Uwe Bonnes
Change-Id: Ic3d0b47b19dae9cb09c11d24f16fea85a1b90c0b Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2397 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26stm32f0/nucleo: Use only one configuration for all stm32f0 nucleo boards.Uwe Bonnes
Change-Id: Ib2ddcd7a92c0d7ad503ef8e953f2bc304241a9f0 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2396 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15target/stm32xx: Endian is not configurable.Karl Palsson
So remove it from all the configs, it's misleading, and leads to cargo culting of config files. Change-Id: I2b77e60d5e96f9759c7c9fc91b20e73be2e95d9a Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
This is an integrated adapter used on the IoT-LAB boards. Schematics are available from https://github.com/iot-lab/iot-lab/wiki/Docs/openm3-schematics.pdf Change-Id: I1c80e72653c3f319bb04d01e3dfddb1c2447c398 Tested-by: Quentin Lampin <quentin.lampin@orange.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2415 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15tcl/board: Add TI TMDX570LS20SUSB board configAndreas Färber
It is derived from ti_tmdx570ls31usb.cfg, using a different TAP ID. Change-Id: I2d911995c76ea4f75a780cc230d61f4959825809 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15cfg: stm32l1: Use specific chipnameKarl Palsson
This should have been corrected earlier with the split of l1/l0 code apart. Change-Id: I87b94a310ae7e76318554a9cd2705348a942d58b Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2447 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09cfg: fix lpc17xx regressionSpencer Oliver
commit b5a6ba46 broke the following board files, update to new cfg. Change-Id: Ic3b776bd32eb72eae6ad1e130e329268ce9ba71a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2384 Tested-by: jenkins
2014-12-03stm32l: split l0/l1 support no jtag, different HSI settingsKarl Palsson
L0 is cortex m0+, so different id codes, SWD only, different addresses for the clock speedup. It has no endian options, no boundary scan. Removed all L0 specific portions from L1 files, and renamed files to clarify their purpose. The deprecated stm32lx_stlink.cfg is kept as is, as it is only around for backwards compatibility with prior releases. Tested on STM32L053 Discovery and STM32L151 Discovery. Has _not_ been tested with jtag on L1. Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2405 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
2014-12-03stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDsJuha Niskanen
Fix script parse error, when using JTAG, introduced in commit 0187ced9ed2 Add several BS TAPIDs with comments about ST documentation. Change-Id: I8d0370b244ccaf7ea0dbe1919bfad1915f7317d4 Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-on: http://openocd.zylin.com/2376 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz thereUwe Bonnes
Since all F4 parts have an internal HSI providing 16MHz, it's safe to use 2MHz JTAG frequency by default. Change-Id: I2702d5a1d642d4acd4af2db54c028949132c6900 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2383 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4x: add F401 and F411 IDsUwe Bonnes
Change-Id: I12079586dafb8a7614bdf4cc0b13cd5030301742 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2379 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
Change-Id: I8600ee983de85e4225430ae508a50cd938122d89 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2357 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-16cmsis-dap: add serial number supportSpencer Oliver
Change-Id: I66926d1013e2b3a43ce0d18d3599771428706b6a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2329 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-06cfg: remove incorrect execute permissionsSpencer Oliver
Change-Id: I0ba9dfdf876bc99df4e2d1f1f3bc0c9ccc6c98c2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2333
2014-10-06stm32: Add config file for a new board STM32L052 dsicoveryRémi PRUD'HOMME
this board use STLink-V2-1, the STM32L1xx use the STLink-V2. Change-Id: Ie58f45affcb1e9a6fed711b48c3c03b5035ab2b2 Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2317 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06stm32: add L0xx CPUTAPIDRémi PRUD'HOMME
Add CPUTAPID for stm32 L0xx mcu devices. Using -expected-id to add the new id with the id for L1xx devices. This for reduce the duplicated code. Change-Id: I48bd230884ecf38fa200c620b547bdf3b5f59132 Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2315 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
According to my inspection of an Olimex ARM-USB-OCD-H adapter ACBUS0 is connected directly to an SN74LVC2T45 buffer input B2, and the corresponding output A2 is connected directly to the JTAG connector. It seems the information in the Olimex flyer is incorrect for the -H version and TRST can't be tri-stated, ACBUS2 is unused. The older ARM-USB-OCD device has SN74AC244 for an output buffer and ACBUS2 controls its !2OE, ACBUS0 connected to 2A1 (2Y1 is nTRST), in accordance with the information flyer. Change-Id: I22828b7b959b6f62c3f51367feb8fab9705641e5 Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2286 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tim Sander <tim@krieglstein.org>
2014-09-29tcl/board: add TI Tiva C ek-tm4c1294xl configKarl Palsson
Change-Id: Iab070fe4c0f03ecc0db035b16dfb64105b0841be Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2063 Tested-by: jenkins
2014-09-22target: Remove "-variant" argumentAndreas Fritiofson
Remove this underutilized feature. Despite the fact that a lot of configs specifies a arbitrary "variant", only the xscale target actually defines any. In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it. If there's a future target that needs a variant set, a target specific option could be added when needed. Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
The hla_serial command allows for a programming device serial number to be specified in addition to USB VID/PID. This allows for multiple ST-LINK/V2 programmers to be attached to a single machine and operated using openocd. Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791 Signed-off-by: Austin Phillips <austin_phillips@hotmail.com> Reviewed-on: http://openocd.zylin.com/2198 Tested-by: jenkins Reviewed-by: Martin Glunz <mg@wunderkis.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-15cfg: Added Nucleo-F411RE board config.Nemui Trinomius
It supports STLink/V2-1 debug adapter. Change-Id: Ifbc610cd68ec929608369e69d0b1395fe04956cd Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2259 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-09-15tcl/board/sheevaplug: add adapter_khz settingPaul Fertser
This combination is known to work properly with 2MHz JTAG clock. Change-Id: Ie5ec3d3b415efbb13faee7d34e0c7f862b78350c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2266 Tested-by: jenkins
2014-09-11tcl/interface/ftdi/sheevaplug: fix device descriptionPaul Fertser
Without this SheevaPlug debugging interface can't be matched. Change-Id: Ifca149130d03c1aa165ed1123e8540e49485f023 Reported-by: Andreas Schneider <schneider.andi@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2265 Tested-by: jenkins
2014-09-08cfg: refactor lpc1xxx targets onto one base configVanya Sergeev
Since now auto-detection for flash size works nicely, there's no reason to keep numerous configs around. Change-Id: If0cbc37985abf17ef7c1f7d0688e76500fac228f Signed-off-by: Vanya Sergeev <vsergeev@gmail.com> Reviewed-on: http://openocd.zylin.com/1960 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-08tcl/target: add config for К1879ХБ1Я, a hybrid ARM11/DSP SoC by RC ModuleБурага Александр
This adds config to allow JTAG debugging of an ARM core of a modern hybrid SoC by Research Centre "Module" (http://www.module.ru/en/company/). К1879ХБ1Я is targetted at set-top boxes and other multimedia equipment, the official SDK is Linux-based. Change-Id: Ib2ae5784d25699f952682e66b025a3f677a76d5d Signed-off-by: Бурага Александр <dtp-avb@yandex.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2272 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 06:18:46 +0000