aboutsummaryrefslogtreecommitdiff
path: root/tcl
AgeCommit message (Collapse)Author
2015-11-16tcl/interface/ftdi: add 100ask's OpenJTAG configPaul Fertser
Schematics provided by Matthias Bock. Change-Id: I3d00453fece3b4df58a53bee21fff646a8b71a34 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2718 Tested-by: jenkins
2015-11-13board: ti_am437x_idk: default to 1000kHzFelipe Balbi
16000kHz is only safe after PLLs have been locked properly. Until that's done (with reset init), we can only safely run at 1000kHz. Change-Id: I4e0a17e88aa9919cd6c34d44da68e23115c0d3a3 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/3015 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-13topic: Interface config file for FTDI UM232H moduleRagnar Sundblad
Added interface config file for the FTDI FT232H based UM232H module. This should work with UM232H-B too, an even cheaper module, but that has not been tested. Change-Id: Ifc312d6741da0b7862fe07d854023190d7afe251 Signed-off-by: Ragnar Sundblad <raggesu@gmail.com> Reviewed-on: http://openocd.zylin.com/3031 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12stm32l4: Add cpu and stm32l4discovery board configuration.Uwe Bonnes
Change-Id: I20d3fcee04516eb3b9bb22933e7e366eed0c0b2e Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2942 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12tcl: Add default hooks for STM32F0xUwe Bonnes
Keep clocks running in low power modes. Stop watchdogs from interfering with the debug session. Set up PLL and increase clock at reset init. Change-Id: I232d769d893d54e4ea9411c46c56b19587b69919 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2707 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12tcl: Add default hooks for STM32F4xUwe Bonnes
Set up PLL and increase clock at reset init. Change-Id: I611bc6fb7c0c5afd8ed3f4ad8e64f3c7b981d31c Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2609 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12stm32xxx.cfg: Only touch IWDG and WWDG in DBGMCU_APB1_FZ.Uwe Bonnes
Change-Id: Ie0298c8e73bebeccc9346534d63aab4cae49e4f7 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3104 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.Rémi PRUD’HOMME
Change-Id: I0803939f0ab1de97e544ca0f1257daac11fb50de Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2754 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-11flash: New driver for XMC4xxx microcontroller familyJeff Ciesielski
This is a complete flash driver for the Infineon XMC4xxx family of microcontrollers, based on the TMS570 driver by Andrey Yurovsky. The driver attempts to discover the particular variant of MCU via a combination of the SCU register (to determine if this is indeed an XMC4xxx part) and the FLASH0_ID register (to determine the variant). If this fails, the driver will not load. The driver has been added to the README and documentation. Tests: * Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise) * SWD + JTAG * Binary: 144k, 1M Note: * Flash protect only partly tested. These parts only allow the flash protection registers (UCB) to be written 4 times total, and my devkits have run out of uses (more on the way) Future Work: * User 1/2(permalock) locking support via custom command * In-memory flash loader bootstrap (flashing is rather slow...) Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2488 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-10flash: driver for Atmel SAMV, SAMS, and SAMEMorgan Quigley
This is a driver for the Atmel Cortex-M7 SAMV, SAMS, and SAME. I started with the at91sam4.c driver and then restructured it significantly to try to simplify it and limit the functionality to just a flash driver, as well as to comply with the style guide. Change-Id: I5340bf61f067265b8ebabd3adad45be45324b707 Signed-off-by: Morgan Quigley <morgan@osrfoundation.org> Reviewed-on: http://openocd.zylin.com/2952 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-10tcl/board: add Atmel SAM V71 Xplained UltraMorgan Quigley
Tested with cmsis-dap using the EDBG chip on the board. Change-Id: I3d398685c81e4701a9f6c1a66e60f7a87f839daa Signed-off-by: Morgan Quigley <morgan@osrfoundation.org> Reviewed-on: http://openocd.zylin.com/3092 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-10tcl/target: add config for Atmel SAMV / SAMS / SAMEMorgan Quigley
Change-Id: Ia90a533fe3d07f9a67ce2da815146c612d80dd1b Signed-off-by: Morgan Quigley <morgan@osrfoundation.org> Reviewed-on: http://openocd.zylin.com/3091 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-05tcl/target: Add configuration for NXP LPC4370 processorJim Norris
New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-05tcl/board: Add LPC-Link2 configAndreas Färber
Tested with Olimex ARM-USB-TINY-H adapter (both JTAG and SWD). Change-Id: Idc8a030e9692eec761d1e2485cbf9897660c0ca0 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3082 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-04Revert "board: don't hardcode interface for ti_beaglebone"Matthias Welwarsky
This reverts commit 7d7a43fd36a61e55e087a474fe41e3dae6375453. The change concerns the "Black" variant of the TI BeagleBone, while the configuration file is for the original BeagleBone board, which actually embeds a debug interface on the PCB. Change-Id: I2232af210deb698f8b3c0a547f26cd0a0a8f89d0 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3094 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-03tcl/target|board: add config Atheros ar2315Oleksij Rempel
Add configs for Atheros ar2313 MIPS based WiSoC and board based on this chip: La Fonera FON2200 Change-Id: Ibfdbfc9c2beca6cf436c9ee5e493b08bfb55ac85 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2839 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03tcl/target|board: add config Atheros ar2313Oleksij Rempel
Add configs for Atheros ar2313 MIPS based WiSoC and board based on this chip: Netgear WP102 Change-Id: Id93957b5d5851a272f15be35f9f448a9ce6d8a08 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2835 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03lpc4350_spifi_generic: Clean up work area sizeAndreas Färber
Since 2cbbe9a it was actually decreasing the configured work area size. We could now do "set WORKAREASIZE 0x2000" before sourcing lpc4350.cfg, but there seems no point in doing so. Simply drop the configuration here. Change-Id: I25b9dbbc007ba652b66099832198b7c329929858 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3086 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-03lpc8xx: Allow CHIPNAME overrideAndreas Färber
Default to lpc8xx as before, but allow setting the actual CHIPNAME. Change-Id: I5a48fa75c640440a0d4c3f2858653e94bed846d2 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3084 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-11-03tcl: add STM32F469 discovery board configMaxime Coquelin
Change-Id: Iad7ee06330b3259ea0ce0d174dfdade6785913eb Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> Reviewed-on: http://openocd.zylin.com/3043 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-03board: don't hardcode interface for ti_beagleboneMatthias Welwarsky
Board files should not select the interface. The BeagleBone Black is not limited to just one JTAG interface. Change-Id: I71ccc3dd9e2ca331a436701fab04e548b0abf829 Signed-off-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-on: http://openocd.zylin.com/3083 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/board: Add Diolan LPC4357-DB1 configAndreas Färber
Adapted from diolan_lpc4350-db1.cfg. Both boards are identical except for the SoC, so keep them in sync. Change-Id: If892d8e953b0e3a9209a95b3b23a547357c10b7a Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3038 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Add LPC4357 configAndreas Färber
Reuse the flashless LPC4350 as base and amend it as necessary. The LPC43x7 have 2x 512 KB of flash. Change-Id: Ia7ffbc7101023479971984b839f171ed4be6b089 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3037 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/board: Add Spansion SK-FM4-U120-9B560 configAndreas Färber
Change-Id: I01464b2a999890d50b95d0fb98ff46d8a04a2c57 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3009 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30fm4: Add JTAG supportAndreas Färber
Add support for the JTAG TAPID found on SK-FM4-U120-9B560-MEM V1.1.0 board. Change-Id: Idbfe28927e0c549f0c89c29904d23971281927c9 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3039 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Prepare FM4 MB9BFxxx familyAndreas Färber
It is found on the SK-FM4-U120-9B560-MEM V1.1.0 among others. Change-Id: I4c708c9391e954cbbc8d0860a2a2dbd264aea865 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3008 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30fm4: Split out S6E2CC family configAndreas Färber
Its memory layout is different from MB9BFxxx. Change-Id: I39c9f9cf582cd182971a9f83bb88c7a18da6cf15 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3007 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/board: Add Arndale configAndreas Färber
Tested with Olimex ARM-USB-OCD-H adapter. Change-Id: I1bf68176f9c155f8803df5a10a7fbe03116c6309 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3081 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Add Exynos5250 configAndreas Färber
Change-Id: Ia673d3f16b2238d5af8fbeff2d57c6cf27dcffb1 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3080 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/board: Add config for XMOS xCORE-XA Core Module ARM debuggingAndreas Färber
The xCORE-XA Core Module board has an XS1-XAU8A-10 SoC with 8 xCORE cores and one ARM core. This config is for the ARM Cortex-M3, via J-Link OB. Tested with "J-Link OB-STM32F103 V1 compiled Feb 5 2014 13:48:52". Change-Id: Id7fadf8f323b45d5cfc0cae1054bd7b916771d6a Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2763 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-30tcl/target: Add config for XMOS XS1-XAU8A-10's ARM coreAndreas Färber
The XS1-XAU8A-10 has 8 xCORE cores and one ARM core. This config represents the ARM Cortex-M3 core, which is apparently Silicon Labs EFM32 Giant Gecko IP. Change-Id: I998360f096c759d2e274d96c1ca2e0450ba61146 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2762 Tested-by: jenkins Reviewed-by: Oleksij Rempel Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-30tcl/board: Add Digilent Analog Discovery configForest Crossman
Change-Id: Idf2cb8d8578e650fda4082f6bbf272518762ebf0 Signed-off-by: Forest Crossman <cyrozap@gmail.com> Reviewed-on: http://openocd.zylin.com/2752 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-10-21tcl: Support for reading "Device DNA" from Spartan 6 devices.Tim 'mithro' Ansell
Most Xilinx FPGA devices contain an embedded, unique device identifier called the "Device DNA". The identifier is nonvolatile, permanently programmed into the FPGA, and is unchangeable providing a great serial / tracking number. Debugging was done in https://github.com/timvideos/HDMI2USB/issues/36 Change-Id: Iad03eafb40887f0321a4dc22858a7c3bf37a12b3 Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/2960 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-21tcl: Adding the Numato Opsis board.Tim 'mithro' Ansell
Another board supported by the ixo-usb-jtag project. Change-Id: I676197c64e208886bc03d1bafcc964ef1fc2160b Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/2963 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-21tcl: Adding the Digilent Atlys board.Tim 'mithro' Ansell
The board is supported via the ixo-usb-jtag firmware. Change-Id: I1e8a5ead850c0843b8532a5b54a7e7117778278e Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/2962 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-10-21tcl: Setting lowlevel driver for ixo-usb-jtagTim 'mithro' Ansell
Also add further documentation about the project and how to use it. Change-Id: Ia9878de566b3c8c1ea29f129287d5aea904d861d Signed-off-by: Tim 'mithro' Ansell <mithro@mithis.com> Reviewed-on: http://openocd.zylin.com/2961 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-09-30numicro: Integrate Nuvoton NuMicro flash driver.Nemui Trinomius
Flash driver "mini51.c" and "nuc1x.c" are same target MCU. This patch integrates each driver and functions, and makes into new "NuMicro" flash driver. Change-Id: Ifff5c1cfdd265acca0f489631695be9194fa144c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2794 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-09-30flash: Analog Devices ADuCM360 supportIvan Buliev
A target config and a simple flash driver for the ADuCM360 microcontroller. The EEPROM of the chip may be erased and programmed. Change-Id: Ic2bc2f91ec5b6f72e3976dbe18071f461fe503b8 Signed-off-by: Ivan Buliev <i.buliev@mikrosistemi.com> Reviewed-on: http://openocd.zylin.com/2787 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2015-09-30tcl/board: Add Parallella-I board configAndreas Färber
Tested with Porcupine-1 JTAG adapter board and Digilent JTAG-HS3 interface; reset does not yet work, pending nSRST configuration of the interface used. Change-Id: I0d0679e098d93ffbd1539004cdb900e2a8ae4a25 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2730 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-09-30zynq_7000: Add expected IDAndreas Färber
As found on the Parallella-I board SKU A101020. Change-Id: Ie7e7a36325926d67fbe555b46a9be8a74fac8dba Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2729 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-09-30tcl/interface/ftdi: Add Digilent JTAG-HS3 configAndreas Färber
Derived from tcl/interface/digilent-hs1.cfg. JTAG-HS3 has an open drain buffer on pin 14 for SRST to work with PS_SRST_B on Xilinx Zynq SoC. Change-Id: I1e9e72d0511528a61207e318aff937ae9fad5bf9 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2728 Tested-by: jenkins Reviewed-by: Robert Jordens <jordens@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06bcm2835gpio: Add SWD support, Raspberry Pi 2 support.Christoph Pittracher
Added support for SWD transport similar to sysfsgpio driver. Added configurable peripheral base address to support Raspberry Pi 2. Change-Id: If76d45fbe74ce49f1f22af72e5f246e973237e04 Signed-off-by: Christoph Pittracher <pitt@segfault.info> Reviewed-on: http://openocd.zylin.com/2802 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06at91samd: add chip IDs for SAMC20 and SAMC21 familiesAndrey Yurovsky
Add the chip IDs corresponding to the new 5V "SAMC" parts which are otherwise identical to the SAMD and should work with this driver. Also add the configurations for their Xplained Pro boards. Change-Id: Ic268d4ac384a3a77d4211a94da9f9faf4d8c0f7b Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2809 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06kc705: digilent-jtag/kintex7/jtagspi boardRobert Jordens
Xilinx Kintex7 Development board with integrated Digilent JTAG-SMT1 (a.k.a. HS1) interface and a 128 MBit SPI flash. Change-Id: I9daba0a2fb2c17e04bcb37bd41872ebde25e0d2f Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/2861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06pipistrello: ftdi-jtag/spartan6/jtagspi boardRobert Jordens
The Pipistrello is a low cost FPGA board with a Xilinx Spartan6 LX45, a SPI flash and onboard FTDI JTAG. This board is a good example use case for the jtagspi flash driver talking through a proxy bitstream. Change-Id: I04a80610ff825c36ebcb67b879507028eed141ad Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/2846 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06flash/nor/jtagspi: add JTAGSPI driverRobert Jordens
Many FPGA board speak JTAG and have a SPI flash for their bitstream attached to them. The SPI flash is programmed by first uploading a proxy bitstream to the FPGA that connects the JTAG interface to the SPI interface if the IR contains a certain USER instruction. Then the SPI flash can be erase, written, read directly through the JTAG DR. The JTAG and SPI signaling is compatible. Such a proxy bitstream only needs to connect TDO-MISO, TDI-MOSI, TCK-CLK, and the activate the chip select when the IR contains the special instruction and the JTAG state machine is in the DR-SHIFT state. Change-Id: Ibc21d793a83b36fa37e2704966aa5c837c4dd0d2 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/2844 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06tcl/board: Add EmCraft VF6 SOM and baseboard configsAndreas Färber
Tested with "TWR-K70-SOM-BSB-1A" baseboard. Change-Id: I37aa21f1ca8aa13a4bf03be7dd534d6da1aec017 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06tcl/target: Add Freescale Vybrid VF6xx configAndreas Färber
This covers only the Cortex-A5 for now, not the Cortex-M4. Change-Id: I739ec52b14b83d6e9f124ed61f8941502e481402 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2766 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06tcl: replace $TARGETNAME with $_TARGETNAMERadek Dostal
code polishing to be consistent with other scripts Change-Id: Ib52a92f48df9d2bdf543792b856e33aa04dbebe3 Signed-off-by: Radek Dostal <radek.dostal@streamunlimited.com> Reviewed-on: http://openocd.zylin.com/2779 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-24xmc4500-application-kit-general: Drop srst_nogateAndreas Färber
Reset stopped working with this setting. Change-Id: I98e8fafa48e0ab65dce8110870be422edf7b2fdb Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2727 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 17:16:54 +0000