aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Collapse)Author
2011-01-09Add another level of procedures to LPC2xxx initialization - procedures for ↵Freddie Chopin
specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-07Add common LPC2xxx setup procedure, use in all LPC2xxx files.Freddie Chopin
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-23stm32: add stm32 xl family flash supportSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-22lpc2148: redo to the new target configuration schemeØyvind Harboe
Define a proc which PCBs can easily override. Also demonstrates how to add multiple TAP exepcted-id's using arguments. Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon I happened to have on my desk? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-19update IXP42x target / XBA board configMichael Schwingen
2010-12-18Add support for Hilscher netX controllersMichael Trensch
2010-12-18TCL: fix non TCL commentsAntonio Borneo
End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-09remove srst_pulls_trst from LPC2xxx target scriptsFreddie Chopin
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-05lpc2478 target config: CCLK as (mandatory) parameterRolf Meeser
2010-12-03stm32: set default soft reset configSpencer Oliver
If no srst is configured then default to using sysresetreq to reset the target. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-02config: fix luminary jtag configSpencer Oliver
When this config was updated in commit e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1 the old jtag declaration was not removed. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-02rename some target scripts to be consistent with the restFreddie Chopin
Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...) Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-11-23FLASH/NOR: rename from spearsmi to stmsmiAntonio Borneo
STMicroelectronics controller SMI is not SPEAr specific. Rename it and change name to every symbol in the code. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23STR750: Add SMI interface supportAntonio Borneo
Modified spearsmi driver to include support for STR75x Added missing initialization in tcl file for STR750 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09TCL scripts: replace "puts" with "echo"Antonio Borneo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09lpc3131: target definitionAndrew Leech
2010-11-06TCL scripts: add support for ST SPEAr310Antonio Borneo
Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-05CortexA8: Introduce Freescale i.MX51 variantMarek Vasut
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU has the Debug Access Port located at a different address (0x60008000) than TI OMAP3 series of CPUs. i.MX51 configuration file based on OMAP3 configuration file and an email from Alan Carvalho de Assis <acassis@gmail.com>. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-25Make systesetreq typos read sysresetreq insteadPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25Remove srst_pulls_trst from LPC1768 targetPeter Stuge
srst_pulls_trst may be true on some (broken) LPC1768 boards but is not true in general for the LPC1768. Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-10swj-dp.tcl (SWD infrastructure #1)David Brownell
Provide new helper proc that can set up either an SWD or JTAG DAP based on the transport which is in use -- mostly for SWJ-DP. Also update some SWJ-DP based chips/targets to use it. The goal is making SWD-vs-JTAG transparent in most places. SWJ-DP based chips really need this flexible configuration to cope with debug adapters that support different transports, without needing new target configs for each transport or adapter. For JTAG-DP, callers will use "jtag newtap" directly, as today; only one chip-level transport option exists. For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly (part of an upcoming SWD transport patch). Again, only one transport option exists, so hard-wiring is appropriate there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-09-26Fix omap3_dbginit to write to physical memory.Zachary T Welch
Setting the OMAP3530 DBGEN bit must be done in physical memory, so update omap3_dbginit callback to use the new 'mww phys' command syntax.
2010-09-21TCL scripts: collect duplicated proceduresAntonio Borneo
TCL procedures mrw and mmw, originally in DaVinci target code, are duplicated in other TCL scripts. Moved in a common helper file, and added help/usage description. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-20AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun
2010-09-14board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron
the new Marvell PXA270M processor has a new TAPID: 0x89265013. Attached you will find a patch for target/pxa270.cfg that will handle this. I have also attached a board/colibri.cfg file to support the Colibri PXA270 module by Toradex. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-31cortex m3: add cortex_m3 reset_config cmdSpencer Oliver
This new cmd adds the ability to choose the Cortex-M3 reset method used. It defaults to using SRST for reset if available otherwise it falls back to using NVIC VECTRESET. This is known to work on all cores. Move any luminary specific reset handling to the stellaris cfg file. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31cfg: update Luminary config filesSpencer Oliver
- Update all Luminary config's to use a common target/stellaris.cfg. - Add Luminary ek-lm3s6965 config. - Increase working area for boards with more ram. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-19imx35pdk: fix clock and reset delaysØyvind Harboe
Use rclk and 100ms delay on ntrst Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-17mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe
Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-15avr32: basic target scriptOleksandr Tymoshenko
2010-08-15at32ap7000 config fileDavid Brownell
nice board to play with.
2010-08-13lpc1768: turn down the jtag clockØyvind Harboe
Tests should that it needs to be as low as 100kHz to be stable. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-12DM36x: Set OSCDIV dividerThomas Koeller
The ability to set up the OSCDIV divider was missing. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12DM36x: Disable unused SYSCLKsThomas Koeller
Clear the enable bits for all clocks that are not set explicitly. This is done to increase robustness by removing pre-existing state. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-12DM36x: Use enable bit for PLL pre-dividerThomas Koeller
The PLL pre- and postdividers seem to have enable bits, although these are not mentioned in the chip documentation. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com>
2010-08-11tcl: remove silly ocd_ prefix to array2mem and mem2arrayØyvind Harboe
ocd_ prefix is used internally in OpenOCD as a kludge more or less to deal with the two kinds of commands that OpenOCD has. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-11config scripts: remove useless reference to OpenOCD docsØyvind Harboe
clutters config scripts. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-10cfg: add omapl138 support and da850evm preliminary supportBen Gardiner
This patch adds support for the omapl138 target and preliminary support for the da850evm. The target cfg file is based on the icepick routing done by the target/ti_dm6446.cfg file. I have performed limited testing with this setup. I am posting this patch in the interest of sharing cfg files and in the hopes that the experts on this list can correct errors I have made or point out enhancements. The testing I have performed is debugging uboot with gdb where I also use the following local.cfg and gdbinit files. Debugging appears to work in so much as 'ni' works. local.cfg: gdb_memory_map disable gdbinit: target remote localhost:3333 set remote hardware-breakpoint-limit 2 set remote hardware-watchpoint-limit 2 monitor poll on Comments welcome. Best Regards, Ben Gardiner
2010-08-02lpc1768: even if rclk "works", it isn't necessarily the correct clkØyvind Harboe
rclk = 4MHz oon lpc1768, the correct JTAG clk is 666MHz(4MHz/6). Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-01Remove srst_pulls_trst from LPC2148 targetPeter Stuge
srst_pulls_trst is only true on some (broken) LPC2148 boards, a fact which is already documented in doc/openocd.texi, so it shouldn't be set unconditionally in the target tcl. This patch was needed to reflash when an Abort exception occured very early after reset, before OpenOCD tried to halt the CPU.
2010-07-30lpc7168: make flash available upon reset initØyvind Harboe
set user mode to avoid ROM being mapped at address 0 rather than flash. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-07-17lm3s811-ek uses generic stellaris target configDavid Brownell
There's no point in an lm3s811-specific target file, so remove it in favor of the generic "stellaris.cfg". Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-07-13cfg: add Avalue RSC-W910 configSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-06-25at91sam3s* supportOlaf Lüke
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15DM36x: pll & clock setupThomas Koeller
Added a function 'pll_v03_setup' to set up PLLs and clock dividers on DM365 and DM368. Signed-off-by: Thomas Koeller <thomas.koeller@baslerweb.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-15arm1136 scriptsmichal smulski
Here is a patch to fix a startup in C100 (arm1136). Basically make sure that UART is configured before using it. Michal Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-26cfg: add pic32 virtual banksSpencer Oliver
make use of the new virtual bank flash driver. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24There are no variants of arm7tdmi targetFreddie Chopin
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24All LPC2xxx chips are little endian and that cannot be changed - update ↵Freddie Chopin
config scripts Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-24add correct CPUTAPID value for LPC2129Freddie Chopin
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 04:42:03 +0000