aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Collapse)Author
2011-05-18flash support (only full erase/write) for 568013 and 568037Rodrigo L. Rosa
2011-05-18partial support for 568013 and 568037, target integration.Rodrigo L. Rosa
2011-05-05beagleboard: add support for various icepick versionsØyvind Harboe
The beagleboard icepick jtag tap id's vary.
2011-05-03Add support for the lpc2460 targetAlexandre Pereira da Silva
2011-05-03Make the lpc2xxx generic driver support romless partsAlexandre Pereira da Silva
2011-04-28u8500.cfg : ste u8500 supportMichel Jaouen
2011-04-13Add preliminary support for Freescale iMX53Luca Ellero
Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-04-13Add the REV A tap id to the LPC3250 configurationAlexandre Pereira da Silva
2011-04-02pandaboard: use new -dbgbase option to workaround broken ROM tableØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-22omap4430: cortex a9 and a8 are now merged againØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-03-13omap4430: force hardware breakpoints for GDBAaron Carroll
Soft breakpoints are currently broken if the MMU is enabled due to incorrect cache flushing. Until this is fixed, force the use of hardware breakpoints. Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-03at91: add at91sam9g45 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9g10 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9260: update sram informationJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9263 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91: add at91sam9261 supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03at91sam9: factorise cpu supportJean-Christophe PLAGNIOL-VILLARD
all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-18stm32: add ID for medium density device Rev ZLuca Ellero
stm32-discovery evaluation board (STM32F100RBTB6): reading device id register (0xE0042000) returns 0x10010420 Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-08omap4430: Add JRC TAPID for PandaBoard REV EA1 (PEAP platforms)Luca Ellero
PandaBoard REV EA1 (Panda Early Adopter Program) has a different ID. This patch add alternate REV EA1 TAP id to configuration file Signed-off-by: Luca Ellero <lroluk@gmail.com>
2011-02-02omap4430: fix reset sequenceAaron Carroll
* Write to the PRM reset control register should have been 'phys'; * Setup empty reset-assert handlers for the M3's, since the board-level reset takes care of them; * Remove the dbginit cruft, because it gets called implicitly on reset. Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-31TCL configs for OMAP4430 and PandaboardAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-09Add another level of procedures to LPC2xxx initialization - procedures for ↵Freddie Chopin
specific targets (setup_lpc<number>) take core clock and adapter clock as parameters. This way "constant" parameters (flash size and type, CPUTAPID, etc.) do not need to be copied if one wishes to change the "variable" parameters - like the core clock or adapter clock - in a board config file or somewhere else. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2011-01-07Add common LPC2xxx setup procedure, use in all LPC2xxx files.Freddie Chopin
Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-23stm32: add stm32 xl family flash supportSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-22lpc2148: redo to the new target configuration schemeØyvind Harboe
Define a proc which PCBs can easily override. Also demonstrates how to add multiple TAP exepcted-id's using arguments. Added 0x3f0f0f0f as expected TAP-id. Old LPC2148 silicon I happened to have on my desk? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-19update IXP42x target / XBA board configMichael Schwingen
2010-12-18Add support for Hilscher netX controllersMichael Trensch
2010-12-18TCL: fix non TCL commentsAntonio Borneo
End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-09remove srst_pulls_trst from LPC2xxx target scriptsFreddie Chopin
LPC2xxx do not require reset_config srst_pulls_trst. This can cause various "strange" problems when flashing the chip, because "reset halt" actually allows the chip to run for some short period of time and execute some code. Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-12-05lpc2478 target config: CCLK as (mandatory) parameterRolf Meeser
2010-12-03stm32: set default soft reset configSpencer Oliver
If no srst is configured then default to using sysresetreq to reset the target. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-02config: fix luminary jtag configSpencer Oliver
When this config was updated in commit e3773e3e3d1f1ee0dbb0b69e8babe8419784d1c1 the old jtag declaration was not removed. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-02rename some target scripts to be consistent with the restFreddie Chopin
Rename Atmel target scripts which had wrong name ("at91" missing for ARM7 AT91SAM7..., "at" missing for AVR ATmega...) Signed-off-by: Freddie Chopin <freddie_chopin@op.pl>
2010-11-23FLASH/NOR: rename from spearsmi to stmsmiAntonio Borneo
STMicroelectronics controller SMI is not SPEAr specific. Rename it and change name to every symbol in the code. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-23STR750: Add SMI interface supportAntonio Borneo
Modified spearsmi driver to include support for STR75x Added missing initialization in tcl file for STR750 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09TCL scripts: replace "puts" with "echo"Antonio Borneo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09lpc3131: target definitionAndrew Leech
2010-11-06TCL scripts: add support for ST SPEAr310Antonio Borneo
Initial support for ST SPEAr310 and for the evaluation board EVALSPEAr310 Rev. 2.0. Scripts are split in generic for SPEAr3xx family and specific for SPEAr310. This should easily allow adding new members of the family. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-05CortexA8: Introduce Freescale i.MX51 variantMarek Vasut
This patch introduces support for Cortex A8 based Freescale i.MX51 CPU. This CPU has the Debug Access Port located at a different address (0x60008000) than TI OMAP3 series of CPUs. i.MX51 configuration file based on OMAP3 configuration file and an email from Alan Carvalho de Assis <acassis@gmail.com>. Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
2010-10-25Make systesetreq typos read sysresetreq insteadPeter Stuge
Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-25Remove srst_pulls_trst from LPC1768 targetPeter Stuge
srst_pulls_trst may be true on some (broken) LPC1768 boards but is not true in general for the LPC1768. Signed-off-by: Peter Stuge <peter@stuge.se>
2010-10-10swj-dp.tcl (SWD infrastructure #1)David Brownell
Provide new helper proc that can set up either an SWD or JTAG DAP based on the transport which is in use -- mostly for SWJ-DP. Also update some SWJ-DP based chips/targets to use it. The goal is making SWD-vs-JTAG transparent in most places. SWJ-DP based chips really need this flexible configuration to cope with debug adapters that support different transports, without needing new target configs for each transport or adapter. For JTAG-DP, callers will use "jtag newtap" directly, as today; only one chip-level transport option exists. For SW-DP (e.g. LPC1[13]xx or EFM32, they'll use "swd newdap" directly (part of an upcoming SWD transport patch). Again, only one transport option exists, so hard-wiring is appropriate there. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-09-26Fix omap3_dbginit to write to physical memory.Zachary T Welch
Setting the OMAP3530 DBGEN bit must be done in physical memory, so update omap3_dbginit callback to use the new 'mww phys' command syntax.
2010-09-21TCL scripts: collect duplicated proceduresAntonio Borneo
TCL procedures mrw and mmw, originally in DaVinci target code, are duplicated in other TCL scripts. Moved in a common helper file, and added help/usage description. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-20AM/DM37x: Unify configuration scripts and add support for TI Beagleboard xM.Karl Kurbjun
2010-09-14board scripts: Marvell PXA270M processor has a new TAPID: 0x89265013Takács Áron
the new Marvell PXA270M processor has a new TAPID: 0x89265013. Attached you will find a patch for target/pxa270.cfg that will handle this. I have also attached a board/colibri.cfg file to support the Colibri PXA270 module by Toradex. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-31cortex m3: add cortex_m3 reset_config cmdSpencer Oliver
This new cmd adds the ability to choose the Cortex-M3 reset method used. It defaults to using SRST for reset if available otherwise it falls back to using NVIC VECTRESET. This is known to work on all cores. Move any luminary specific reset handling to the stellaris cfg file. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-31cfg: update Luminary config filesSpencer Oliver
- Update all Luminary config's to use a common target/stellaris.cfg. - Add Luminary ek-lm3s6965 config. - Increase working area for boards with more ram. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-08-19imx35pdk: fix clock and reset delaysØyvind Harboe
Use rclk and 100ms delay on ntrst Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-08-17mcb1700: Keil MCB1700 w/1768 config scriptØyvind Harboe
Ca. 93kBytes/s flashing speed @ 10MHz JTAG clock Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 10:26:49 +0000