aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Collapse)Author
2009-10-07make OMAP5912 resets more reliableDavid Brownell
Without some extra delay after releasing SRST, we seemed to be trying to talk to the TAP before it was ready to respond. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07iMX25 target supportJohn Rigby
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-06Dragonite target scriptdbrownell
From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2806 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell
The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Get rid of needless OMAP and Davinci target config optionsdbrownell
so they provide better examples and are easier to maintain. git-svn-id: svn://svn.berlios.de/openocd/trunk@2797 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Updated reset event handling in omap3530 cfgmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2796 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30Remove annoying EOL whitespace (again, sigh).dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2781 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30strip gdb config optionsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2779 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30michal smulski <michal.smulski@ooma.com> reset now worksoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-27Don't provide invalid OMAP5912 IR capture value/mask attributesdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2762 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25Update DM355 target config to know about ICEpick.dbrownell
Still defaults to nonstandard EMU0/EMU1 settings. git-svn-id: svn://svn.berlios.de/openocd/trunk@2757 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-25Michael Hasselberg <mh@open-engineering.de> target configuration files for ↵oharboe
Toshiba TX09 familiy git-svn-id: svn://svn.berlios.de/openocd/trunk@2756 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Remove annoying end-of-line whitespace from tcl/* filesdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2743 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Ensure that DaVinci chips can't start with a too-fast JTAG clock.dbrownell
It can be sped up later, once it's known the PLLs are active. Note that modern tools from TI all use adaptive clocking; and that if that's done with OpenOCD, "too fast" is also a non-issue. git-svn-id: svn://svn.berlios.de/openocd/trunk@2740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Reduced sleep time after reset mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2732 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-18Move Cortex A8 debug access initialisation from omap3530.cfg to cortex_a8.cmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2728 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-16Rolf Meeser <rolfm_9dq@yahoo.de> adds flash support for NXP's LPC2900 family ↵oharboe
(ARM968E). git-svn-id: svn://svn.berlios.de/openocd/trunk@2715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-13Magnus Lundin <lundin@mlu.mine.nu> Disable poll while core register ↵oharboe
initialization git-svn-id: svn://svn.berlios.de/openocd/trunk@2703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-12David Brownell <david-b@pacbell.net> oharboe
Update the board config for the DaVinci DM355 EVM so the reset-init event handler does the rest of the work it should do: - minor PLL setup bugfixes - initialize the DDR2 controller - probe both NAND banks - initialize UART0 - enable the icache git-svn-id: svn://svn.berlios.de/openocd/trunk@2699 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe
tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11syntax error fixoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-10michal smulski <michal.smulski@ooma.com> telo target/board scriptsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2683 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04use "armv4_5 core_state arm" instead of soft_reset_halt, fewer side effectsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2672 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04set ARM mode using explicit command rather than soft_reset_halt which has ↵oharboe
lots of side effects. git-svn-id: svn://svn.berlios.de/openocd/trunk@2669 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04David Brownell <david-b@pacbell.net> "set _TARGETNAME ..." cleanupoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2665 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-04David Claffey <dnclaffey@gmail.com> get rid of reset recursionoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2664 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-02David Claffey <dnclaffey@gmail.com> tested with the Atheros reference design ↵oharboe
"PB44" git-svn-id: svn://svn.berlios.de/openocd/trunk@2662 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25Ferdinand Postema <ferdinand@postema.eu> increase reset delay to fix ↵oharboe
regression from 2600 to 2604 git-svn-id: svn://svn.berlios.de/openocd/trunk@2614 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25use cortex_a8 instead of cortex_m3oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2610 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-21Pieter Conradie <Pieter.Conradie@psitek.com> shuffle things around to the ↵oharboe
right spots. Should have been done in previous commit. git-svn-id: svn://svn.berlios.de/openocd/trunk@2604 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18David Brownell <david-b@pacbell.net> Cleanup the Stellaris target configs:oharboe
- remove endianness options; these chips hard-wire "little" - $_TARGETNAME updates: * don't pass $_TARGETNAME where a TAP label is required * flash config uses $_TARGETNAME (it might not be target #0) * simplify one $_TARGETNAME construction - update work area setup: * remove VM spec; these chips have no VM! * fix some wrong sizes (0x4000 == 16K, not 4K) * simplify: take defaults - comment fixups git-svn-id: svn://svn.berlios.de/openocd/trunk@2589 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16Xiaofan Chen <xiaofanc@gmail.com> Split LM3S811 config file into target file ↵oharboe
and board file git-svn-id: svn://svn.berlios.de/openocd/trunk@2584 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16michal smulski <michal.smulski@ooma.com> arm11 target config filesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2583 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-16Xiaofan Chen <xiaofanc@gmail.com> Add config file for TI-Luminary LM3S1968 ↵oharboe
chip and EK-LM3S1968 board git-svn-id: svn://svn.berlios.de/openocd/trunk@2582 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-13Audrius Urmanavičius [didele.deze@gmail.com]:ntfreak
Add flash programming support for NXP LPC1700 cortex_m3 based family git-svn-id: svn://svn.berlios.de/openocd/trunk@2579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-22Stefano Voulaz <s.voulaz@projecktstudio.com> first cut samsung_s3c2450 oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2556 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-10David Brownell <david-b@pacbell.net> split EK board support outoharboe
from the target CPU support . git-svn-id: svn://svn.berlios.de/openocd/trunk@2504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-08sharpen reset_config for imx27 - use both trst & srst. srst pulls trst.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07srst pulls trst according to Freescale docs for i.mx27oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06David Brownell <david-b@pacbell.net> Update docs to say that "arm7_9 dbgrq ↵oharboe
enable" is the default on ARM9 cores, and update the DaVinci config files so they no longer explicitly specify it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2484 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Xiaofan Chen <xiaofanc@gmail.com> With this patch, OpenOCD can talk to myoharboe
Analog Device Eval-ADuC7060 eval board. git-svn-id: svn://svn.berlios.de/openocd/trunk@2459 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Remove vim editor commands from TCL files.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02David Brownell <david-b@pacbell.net>:zwelch
Prepare the DaVinci PLL code to support the version 0x0E module used in newer chips (e.g. dm365): rename the original code so it's specific to version 0x02 PLL modules, and update the dm355evm code to use that new name. Fix two minor bugs in that version 2 code: sysclk3 setup used the sysclk2 divider address (affecting video processing on dm355, no worry for now) and sysclk2 setup had a syntax error. Also minor fixups to dm355evm, mostly to permit use of RTCK. git-svn-id: svn://svn.berlios.de/openocd/trunk@2447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-01- add stm32 connectivity line tapid to stm32.cfgntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@2440 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Add svn:eol-style native property to TCL files that are missing it.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2433 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Remove executable bits from at91sam3 configuration files.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2432 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30freddie_chopin@op.pl fix handling of workareaoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Marcel Jost <marcel.jost@bfh.ch>:zwelch
This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29Kevin Bortis <stm32@bortis.ch> fix worksizeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2419 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29David Brownell <david-b@pacbell.net>:zwelch
Minor bugfix ... previous version was tested *with* ICEpick active. The "-disable" can swap with "-enable"; but not with an empty string. git-svn-id: svn://svn.berlios.de/openocd/trunk@2418 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 16:30:52 +0000