aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Collapse)Author
2015-11-12tcl: Add default hooks for STM32F0xUwe Bonnes
Keep clocks running in low power modes. Stop watchdogs from interfering with the debug session. Set up PLL and increase clock at reset init. Change-Id: I232d769d893d54e4ea9411c46c56b19587b69919 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2707 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12tcl: Add default hooks for STM32F4xUwe Bonnes
Set up PLL and increase clock at reset init. Change-Id: I611bc6fb7c0c5afd8ed3f4ad8e64f3c7b981d31c Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2609 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12stm32xxx.cfg: Only touch IWDG and WWDG in DBGMCU_APB1_FZ.Uwe Bonnes
Change-Id: Ie0298c8e73bebeccc9346534d63aab4cae49e4f7 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3104 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-12Add config files for STM32F7-DISCO and STM327[4|5]6G-EVAL.Rémi PRUD’HOMME
Change-Id: I0803939f0ab1de97e544ca0f1257daac11fb50de Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2754 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-11flash: New driver for XMC4xxx microcontroller familyJeff Ciesielski
This is a complete flash driver for the Infineon XMC4xxx family of microcontrollers, based on the TMS570 driver by Andrey Yurovsky. The driver attempts to discover the particular variant of MCU via a combination of the SCU register (to determine if this is indeed an XMC4xxx part) and the FLASH0_ID register (to determine the variant). If this fails, the driver will not load. The driver has been added to the README and documentation. Tests: * Hardware: XMC4500 (XMC4500_relax), XMC4200 (XMC4200 enterprise) * SWD + JTAG * Binary: 144k, 1M Note: * Flash protect only partly tested. These parts only allow the flash protection registers (UCB) to be written 4 times total, and my devkits have run out of uses (more on the way) Future Work: * User 1/2(permalock) locking support via custom command * In-memory flash loader bootstrap (flashing is rather slow...) Change-Id: I1d3345d5255d8de8dc4175cf987eb4a037a8cf7f Signed-off-by: Jeff Ciesielski <jeffciesielski@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2488 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-11-10flash: driver for Atmel SAMV, SAMS, and SAMEMorgan Quigley
This is a driver for the Atmel Cortex-M7 SAMV, SAMS, and SAME. I started with the at91sam4.c driver and then restructured it significantly to try to simplify it and limit the functionality to just a flash driver, as well as to comply with the style guide. Change-Id: I5340bf61f067265b8ebabd3adad45be45324b707 Signed-off-by: Morgan Quigley <morgan@osrfoundation.org> Reviewed-on: http://openocd.zylin.com/2952 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-10tcl/target: add config for Atmel SAMV / SAMS / SAMEMorgan Quigley
Change-Id: Ia90a533fe3d07f9a67ce2da815146c612d80dd1b Signed-off-by: Morgan Quigley <morgan@osrfoundation.org> Reviewed-on: http://openocd.zylin.com/3091 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2015-11-05tcl/target: Add configuration for NXP LPC4370 processorJim Norris
New configuration for NXP LPC4370 which consists of a Cortex-M4 and two Cortex-M0 cores. Change-Id: I9918e3ff33218a14a99e4bbab9dce2e7b45b4d96 Signed-off-by: Jim Norris <u17263@att.net> Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2124 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-11-03tcl/target|board: add config Atheros ar2315Oleksij Rempel
Add configs for Atheros ar2313 MIPS based WiSoC and board based on this chip: La Fonera FON2200 Change-Id: Ibfdbfc9c2beca6cf436c9ee5e493b08bfb55ac85 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2839 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03tcl/target|board: add config Atheros ar2313Oleksij Rempel
Add configs for Atheros ar2313 MIPS based WiSoC and board based on this chip: Netgear WP102 Change-Id: Id93957b5d5851a272f15be35f9f448a9ce6d8a08 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2835 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-11-03lpc8xx: Allow CHIPNAME overrideAndreas Färber
Default to lpc8xx as before, but allow setting the actual CHIPNAME. Change-Id: I5a48fa75c640440a0d4c3f2858653e94bed846d2 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3084 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-10-30tcl/target: Add LPC4357 configAndreas Färber
Reuse the flashless LPC4350 as base and amend it as necessary. The LPC43x7 have 2x 512 KB of flash. Change-Id: Ia7ffbc7101023479971984b839f171ed4be6b089 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3037 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30fm4: Add JTAG supportAndreas Färber
Add support for the JTAG TAPID found on SK-FM4-U120-9B560-MEM V1.1.0 board. Change-Id: Idbfe28927e0c549f0c89c29904d23971281927c9 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3039 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Prepare FM4 MB9BFxxx familyAndreas Färber
It is found on the SK-FM4-U120-9B560-MEM V1.1.0 among others. Change-Id: I4c708c9391e954cbbc8d0860a2a2dbd264aea865 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3008 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30fm4: Split out S6E2CC family configAndreas Färber
Its memory layout is different from MB9BFxxx. Change-Id: I39c9f9cf582cd182971a9f83bb88c7a18da6cf15 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3007 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Add Exynos5250 configAndreas Färber
Change-Id: Ia673d3f16b2238d5af8fbeff2d57c6cf27dcffb1 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3080 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-10-30tcl/target: Add config for XMOS XS1-XAU8A-10's ARM coreAndreas Färber
The XS1-XAU8A-10 has 8 xCORE cores and one ARM core. This config represents the ARM Cortex-M3 core, which is apparently Silicon Labs EFM32 Giant Gecko IP. Change-Id: I998360f096c759d2e274d96c1ca2e0450ba61146 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2762 Tested-by: jenkins Reviewed-by: Oleksij Rempel Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-09-30numicro: Integrate Nuvoton NuMicro flash driver.Nemui Trinomius
Flash driver "mini51.c" and "nuc1x.c" are same target MCU. This patch integrates each driver and functions, and makes into new "NuMicro" flash driver. Change-Id: Ifff5c1cfdd265acca0f489631695be9194fa144c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2794 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-09-30flash: Analog Devices ADuCM360 supportIvan Buliev
A target config and a simple flash driver for the ADuCM360 microcontroller. The EEPROM of the chip may be erased and programmed. Change-Id: Ic2bc2f91ec5b6f72e3976dbe18071f461fe503b8 Signed-off-by: Ivan Buliev <i.buliev@mikrosistemi.com> Reviewed-on: http://openocd.zylin.com/2787 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2015-09-30zynq_7000: Add expected IDAndreas Färber
As found on the Parallella-I board SKU A101020. Change-Id: Ie7e7a36325926d67fbe555b46a9be8a74fac8dba Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2729 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06tcl/target: Add Freescale Vybrid VF6xx configAndreas Färber
This covers only the Cortex-A5 for now, not the Cortex-M4. Change-Id: I739ec52b14b83d6e9f124ed61f8941502e481402 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2766 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-08-06tcl: replace $TARGETNAME with $_TARGETNAMERadek Dostal
code polishing to be consistent with other scripts Change-Id: Ib52a92f48df9d2bdf543792b856e33aa04dbebe3 Signed-off-by: Radek Dostal <radek.dostal@streamunlimited.com> Reviewed-on: http://openocd.zylin.com/2779 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-24target/ti_tms570.cfg: added several JTAG IDs for TMS570LS familyJiri Kastner
from TI datasheets for whole cortex-r4 family added JTAG IDs TMS570LS1227 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns192 0x0B95502F 16/32-Bit RISC Flash Microcontroller, TMS5703137-EP (Rev. B) http://www.ti.com/lit/pdf/spns230 0x0D8A002F 0x2D8A002F 0x3D8A002F RM48L952 16- and 32-Bit RISC Flash Microcontroller (Rev. B) http://www.ti.com/lit/pdf/spns177 0x0D8A002F 0x2D8A002F 0x3D8A002F RM46L852 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns185 0x0B95502F RM48Lx30 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns176 0x0B8A002F 0x2B8A002F 0x3B8A002F RM46Lx30 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns182 0x0B95502F RM46Lx50 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns184 0x0B95502F TMS570LS04x/03x 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns186 0x0B97102F RM42L432 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns180 0x0B97102F RM46Lx40 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/ 0x0B95502F TMS570LS12x5 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns191 0x0B95502F RM48Lx40 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns175 0x0B8A002F 0x2B8A002F 0x3B8A002F TMS570LS31x4/21x4 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns165 0x0B8A002F 0x2B8A002F 0x3B8A002F TMS570LS20216/20206/10216/10206/10116/10106 16/32-Bit RISC Flash Microcontroller (Rev. F) http://www.ti.com/lit/pdf/spns141 0x0B7B302F TMS570LS31x5/21x5 16- and 32-Bit RISC Flash Microcontroller (Rev. B) http://www.ti.com/lit/pdf/spns164 0x0B8A002F 0x2B8A002F 0x3B8A002F RM48Lx50 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns174 0x0B8A002F 0x2B8A002F 0x3B8A002F TMS570LS3137 16- and 32-Bit RISC Flash Microcontroller (Rev. B) http://www.ti.com/lit/pdf/spns162 0x0B8A002F 0x2B8A002F 0x3B8A002F TMS570LS12x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns190 0x0B95502F TMS570LS1115 16- and 32-Bit RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns189 0x0B95502F TMS570LS11x4 16- and 32-BIT RISC Flash Microcontroller (Rev. A) http://www.ti.com/lit/pdf/spns188 0x0B95502F Change-Id: Idf53a44851e1bb4bde4a74c64b65d4411e56da7c Signed-off-by: Jiri Kastner <cz172638@gmail.com> Tested-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/2123 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-24TI TMS570 USB Kit board configAlex Ray
Split TMS570 target into LS31/LS21 and LS20/LS10 targets. Board for the TMS570LS20SUSB Kit, which uses the TMS570 Cortex-R4 MCU from TI. Tested attaching. Change-Id: I1a69ac1ed800d0d6b7f9860c19cbd149e3e47620 Signed-off-by: Alex Ray <a@machinaut.com> Reviewed-on: http://openocd.zylin.com/2089 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-16docs: update OpenOCD url's to openocd.org domainSpencer Oliver
Change-Id: I8b55c8d12773a1c36f2fd2afeecf20a74e890064 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2698 Tested-by: jenkins
2015-04-16tcl/target/stm32f3: fix reset init for stlinkPaul Fertser
Use mmw to manipulate only selected bits of the word. msb and mwb verify the memory location and may error on PLLRDY set as a result of PLLON written. Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d Reported-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2702 Tested-by: jenkins
2015-04-14AT91SAM4L: handle reset run/halt in SMAPTomas Vanek
This is a remake of http://openocd.zylin.com/1966 originally written by Angus Gratton <gus@projectgus.com> ATSAM4L has a "System Manager Access Port" (SMAP) that holds the CPU in reset if TCK is low when srst (RESET_N) is deasserted. Without this change any use of sysresetreq or srst locks the chip in reset state until power is cycled. A new function smap_reset_deassert is called as reset-deassert-post event handler. It optionally prepares reset vector catch and SMAP reset is released then. Change-Id: Iad736357b0f551725befa2b9e00f3bc54504f3d8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2604 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl/target: Add Infineon XMC1000 family target configAndreas Färber
Basic target config, verified against XMC1100 AA/AB, XMC1200 AA/AB, XMC1300 AA/AB manuals. The default adapter_khz was tested with the XMC1100 Boot Kit. Change-Id: Iff6ed52d875ccb83c0d4ff0d555b90e0f28b860c Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2471 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/target: Add Spansion FM4 configAndreas Färber
Assembled by trial-and-error for an S6E2CC. Change-Id: I317c12d24c9075ce3de286455fa3ee45731c5c81 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2569 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14em357: Corrected EM357 support including errata detailsEd Beroset
Original submitted code had only been tested with em358, but testing with actual em357 revealed errors that this patch corrects. Change-Id: I70cf31210de8ed84e3755a56e76261ad200322bb Signed-off-by: Ed Beroset <beroset@ieee.org> Reviewed-on: http://openocd.zylin.com/2581 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl/target: Add Infineon XMC4000 family configAndreas Färber
Base config, verified against XMC4500, XMC4400 and XMC4100/XMC4200 manuals. Change-Id: I10907bdf307bc6d11dc5454bf5391758de49dc30 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2480 Tested-by: jenkins Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-14tcl: icepick: add icepick_d_set_coreidFelipe Balbi
this is just to avoid open coding that in icepick_d_tapenable. Cleanup only, no functional changes. Change-Id: Iabd20291b7bdd95957afa1c74f52171789201227 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2624 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: icepick: call icepick_c_setupFelipe Balbi
it also works on icepick_d. Change-Id: I50c0c81286aae673c94ea77e47454ff48eab1668 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2623 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: icepick: switch over to icepick_c_routerFelipe Balbi
Reusing what's already there to ease maintainability. Change-Id: I2030581669c644e2d9d9f9968075ab6344445d04 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2622 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x: pass coreidFelipe Balbi
This commit is only for the sake of completeness as default coreid is zero. In any case, coreids 1-4 are used for the different PRU cores inside the SoC. Change-Id: I775f2f444b1a908ffaf7bdbc43bcc966f19668c4 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2621 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: am437x: use more descriptive namesFelipe Balbi
Use more descriptive names for JRC and DAPs so they more closely match documentation. For example there's no Cortex A9 DAP, that's the DebugSS DAP where Cortex A9 target sits. In that same DAP we have have ETM, STM and both dual-PRU subsystems. Change-Id: I0e66ebb6299763f96606fae3e4c62e5785c804f2 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2620 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14target: am437x: fix DebugSS DAP IDFelipe Balbi
Main DAP (where Cortex A9 sits) ID is actually 0x46b6902f. Fix it. Change-Id: Ifa3335186bcf60d264d4ecea477bfe2f5ca10ead Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2619 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: add reset-init event handlerFelipe Balbi
this event handler will configure and lock PLLs and configure DDR so platform is placed in usable state. Change-Id: Idd02f4c9789181d69578f8606ac3576ea1dd8a0b Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2616 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: disable watchdog on reset-endFelipe Balbi
sometimes, watchdog might be left running and it could expire in the middle of a debug session, to prevent that, just make sure to disable watchdog on reset-end if current state is 'halted'. Change-Id: Ib4f2a2321cba17cd8c56ca3ae63114a563a6de90 Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2615 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: am437x: define registers to be used laterFelipe Balbi
a later commit will implement a proper reset-init handler to lock pll and configure ddr as we should. Change-Id: I432cf28a5a944bfa83c20aed7298dbd29df30e38 Tested-by: Tom Rini <trini@konsulko.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2614 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x: use entire SRAM areaFelipe Balbi
According to AM4379 TRM [1], table 2-1 L3 Memory Map, we have a total of 256KiB and there's no reason not to use it all. [1] http://www.ti.com/lit/ug/spruhl7b/spruhl7b.pdf Change-Id: I117f2afe721bc4e3f0df304d3542e1a91aa69d12 Signed-off-by: Felipe Balbi <balbi@ti.com> Reviewed-on: http://openocd.zylin.com/2611 Tested-by: jenkins Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-04-14tcl: target: am437x.cfg: pass correct dbgbaseFelipe Balbi
Since commit ec9ccaa28849 (arm_adi_v5: make dap_lookup_cs_component() traverse subtables and handle multicore) AM437x devices can't be used with OpenOCD anymore. The reason is that dbgbase used to be set to zero before that commit and that just happens to work with AM437x devices. A more robust solution is to pass correct dbgbase when creating the target, which this commit does. Signed-off-by: Felipe Balbi <balbi@ti.com> Change-Id: Iaf2617804324de8094b25137943e08b84f14c75f Reviewed-on: http://openocd.zylin.com/2602 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
2015-03-25transport: make 'transport select' auto-select the first available transport ↵Angus Gratton
if not set This should allow most of the existing configurations for older versions to remain compatible without forcing the user to change his or her config to explicitly select transport. Also in some circumstances can remove the need to chain a "-c transport select X" when building custom configs on the command line, which seems like a common new user pitfall. Change-Id: Ic87a38c0b9b88e88fb6d106385efce2f39381d3d Suggested-by: Petteri Aimonen <jpa@git.mail.kapsi.fi> Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2551 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25drivers/cmsis-dap: port to common SWD frameworkPaul Fertser
Valgrind-tested. Comparison of flashing performance on an FRDM-KL25Z board running mbed CMSIS-DAP variant, 5MHz clock, old driver: wrote 28096 bytes from file demo.elf in 26.833590s (1.023 KiB/s) verified 27264 bytes in 1.754972s (15.171 KiB/s) this implementation: wrote 28096 bytes from file demo.elf in 3.691939s (7.432 KiB/s) verified 27264 bytes in 0.598987s (44.450 KiB/s) Also tested "Keil ULINK-ME CMSIS-DAP" with an STM32F100 target, 5MHz clock, results reading from flash, old driver: dumped 131072 bytes in 98.445305s (1.300 KiB/s) this implementation: dumped 131072 bytes in 8.242686s (15.529 KiB/s) Change-Id: Ic64d3124b1d6cd9dd1016445bb627c71e189ae95 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2356 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
This provides support for various trace-related subsystems in a generic and expandable way. Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2538 Tested-by: jenkins
2015-03-10stm32l1.cfg: Add missing dash to fix f7394049d3 commit.Uwe Bonnes
Change-Id: Ifeb2d4fc2b43813edbc6fe2cf08bfd4c55cd1e86 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2590 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Stian Skjelstad <stian@nixia.no>
2015-03-09tcl: Add default hooks for STM32F3xAndreas Fritiofson
Keep clocks running in low power modes. Stop watchdogs from interfering with the debug session. Set up PLL and increase clock at reset init. Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2196 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09stm32l1.cfg: Add ID Code of Cat.2 devices.Uwe Bonnes
Change-Id: I4eb5020858c1896e294d633213f3df3fa45b6250 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2517 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2015-03-09stm32f3x.cfg: Remove duplicate item.Uwe Bonnes
Change-Id: I812c36688add73fab2e74fc112c733c5d3c201a6 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2554 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09lpc2000: Add LPC407x/8x flash size auto detectionNemui Trinomius
This patch adds auto flash size detection for LPC407x/8x series. Tested on below listed chips. LPC4088 LPC1788(regression test) Change-Id: I82f62678a04eac9b84658bd6d1cfdf45be64c931 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2555 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Jens Bauer <jens@gpio.dk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 22:39:01 +0000