aboutsummaryrefslogtreecommitdiff
path: root/tcl/target
AgeCommit message (Collapse)Author
2015-03-09target & board: AT91SAM7A2 and Olimex SAM7-LA2Arne Wichmann
Initial Support for AT91SAM7A2 on Olimex SAM7-LA2 board. The board seems not to be able to reset into halted mode, as srst is connected to NRESET of the cpu (configured srst_pulls_trst). JTAG RCLK is connected to CLK. Tested with interface/ftdi/olimex-arm-usb-ocd-h.cfg. Change-Id: I2bdd67e3683e45f1119c5850bad294aa107891d8 Signed-off-by: Arne Wichmann <arne.wichmann@gmail.com> Reviewed-on: http://openocd.zylin.com/2318 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: add board and target configs for TI SimpleLink Wi-Fi CC3200 LaunchPadPaul Fertser
Change-Id: I4396ee737c1dad380aa23894bbd1faf75f26d072 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2465 Tested-by: jenkins
2015-02-22tcl/target|board: add configs for Alphascale asm9260tOleksij Rempel
This adds configs for Alphascale asm9260t ARM based SoC and Evaluation Kit based on this chip. Change-Id: Id8d3a1ef204e3ae84540c2693e3d62650ba82f73 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2515 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-22cfg: Fix Kinetis kwikstik/kx configAndreas Fritiofson
The flash definition belongs in the target cfg. Add some working area and suitable reset_config. Make kx.cfg more similar to klx.cfg. Disable rclk as it is dead slow and a fixed 1MHz clock seems to work. Change-Id: I8328f179c3a33be64403da93616abb48651bdfe6 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2227 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11sim3x: new flash driver for Silabs SiM3 microcontroller familyAndreas Bomholtz
This is a new driver for Silicon Laboratories SiM3 microcontroller family, based on the work of Ladislav Bábel. The driver will try to detect the type of MCU from the device id register, and if this fails it will use the flash size from the flash bank command. Driver added to the documentation and to the README. TCL script added. Tests: * Hardware: SiM3C166 (pre-production) and SiM3U167 * Binary: 4kb, 197kb, 256kb * Flash protect not tested Change-Id: I701e0cf505ca8ad99be7f83543fe5055b2f65dcc Signed-off-by: Andreas Bomholtz <andreas@seluxit.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2078 Tested-by: jenkins
2015-02-11nrf51 - Add async loader. Performance on nrf51822QAA/stlink-v2 from ↵Angus Gratton
~3.5KiB/s to ~19.5KiB/s. Change-Id: Ib0bf41a0cec85f0bd5728551f8ad7f6255e4ea04 Signed-off-by: Angus Gratton <gus@projectgus.com> [spamjunkeater@gmail.com: Cleanup buffer allocation, detect -1 for unknown pages] Signed-off-by: Erdem U. Altunyurt <spamjunkeater@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2204 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11tcl/target|board: add config Atheros ar9331Oleksij Rempel
Add configs for Atheros ar9331 MIPS based WiSoC and board based on this chip: TP-LINK TL-MR3020 Change-Id: I9e99719bce4bbb28311f6e9cddb32288db6e7b91 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/2519 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11mini51: support for Nuvoton NuMicro M051 series flash memoryPawel Si
adds flash support for Nuvoton M052, M054, M058, M0516 microcontrollers into the mini51 driver, patch also adds support for programing LDROM, flash data and flash config. I've tested it on a M0516LBN microcontroller using an ST-LINK/V2: 1. removing security lock: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "init ; halt ; mini51 chip_erase; exit" 2. flashing: openocd -f interface/stlink-v2.cfg -f target/m051.cfg -c "program file.hex" Change-Id: I918bfbb42461279c216fb9c22272d77501a2f202 Signed-off-by: Pawel Si <stawel+openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/2426 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11tcl/target: add CC2538 and CC26xx target files (with cJTAG procedure)Jacob Palsson
Added support for the Cortex-M3 based TI low power RF SoC CC2538 and the CC26xx family. These chips need a start sequence for switching from cJTAG to JTAG before being used with OpenOCD, this is done in the tcl proc ti_cjtag_to_4pin_jtag in the ti-cjtag.cfg config. The configs for CC2538 and CC26xx run the start sequence on post-reset event and set the ICEPick IDCODE in the data register for OpenOCD to read, this is done so that every time OpenOCD resets the device, it will enable JTAG. Change-Id: I7db620211c0e7e03fad59d24fe31d23a9cdcfedc Signed-off-by: Jacob Palsson <jaaacke@gmail.com> Reviewed-on: http://openocd.zylin.com/2232 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-02-11em357: added target files for em357 and em358Ed Beroset
This patch adds support for Silicon Labs (formerly Ember) EM357 and EM358 chips and derivatives. Change-Id: Ie63aed95a2f4ef1a6b955e301a51b4de1b3a5462 Signed-off-by: Ed Beroset <beroset@ieee.org> Reviewed-on: http://openocd.zylin.com/2470 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-11psoc4: support for Cypress PSoC 41xx/42xx familyTomas Vanek
New NOR flash driver was derived from stm32lx. Procedure ocd_process_reset_inner is overriden in psoc4.cfg to handle reset halt and system ROM peculiarities. Change-Id: Ib835324412d106ad749e1351a8e18e6be34ca500 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2282 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2503 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2435 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-30tcl/target: add lpc8xx.cfgPaul Fertser
This adds a trivial config for LPC8xx chips based on the already existing infrastructure in lpc1xxx.cfg. Change-Id: I7384df1f3c2e3e8ab767319728db5c4f8149480f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2464 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2015-01-26tcl/target/stellaris: Snowflake supports SYSRESETREQ tooPaul Fertser
Change-Id: If4bf472ab8867c54a976bdb5803f7e4f79f350a8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2461 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Ed Beroset <beroset@ieee.org>
2015-01-26tcl/target: consolidate Kinetis configsPaul Fertser
Change-Id: I75fe6b239ff435f700459e7d7040616503fa458e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2460 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26cfg: add srst_nogate to the supported targets, remove from board configsPaul Fertser
It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15target/stm32xx: Endian is not configurable.Karl Palsson
So remove it from all the configs, it's misleading, and leads to cargo culting of config files. Change-Id: I2b77e60d5e96f9759c7c9fc91b20e73be2e95d9a Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15cfg: stm32l1: Use specific chipnameKarl Palsson
This should have been corrected earlier with the split of l1/l0 code apart. Change-Id: I87b94a310ae7e76318554a9cd2705348a942d58b Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2447 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-12-03stm32l: split l0/l1 support no jtag, different HSI settingsKarl Palsson
L0 is cortex m0+, so different id codes, SWD only, different addresses for the clock speedup. It has no endian options, no boundary scan. Removed all L0 specific portions from L1 files, and renamed files to clarify their purpose. The deprecated stm32lx_stlink.cfg is kept as is, as it is only around for backwards compatibility with prior releases. Tested on STM32L053 Discovery and STM32L151 Discovery. Has _not_ been tested with jtag on L1. Change-Id: I8eea890d2f92a302d9e9c8a8832d218ee1b6bcfc Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2405 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com>
2014-12-03stm32: Fix L0/1xx CPUTAPID setting and add new L1xx BSTAPIDsJuha Niskanen
Fix script parse error, when using JTAG, introduced in commit 0187ced9ed2 Add several BS TAPIDs with comments about ST documentation. Change-Id: I8d0370b244ccaf7ea0dbe1919bfad1915f7317d4 Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-on: http://openocd.zylin.com/2376 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4: ramp up JTAG speed, HSI is 16MHz thereUwe Bonnes
Since all F4 parts have an internal HSI providing 16MHz, it's safe to use 2MHz JTAG frequency by default. Change-Id: I2702d5a1d642d4acd4af2db54c028949132c6900 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2383 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24tcl/target/stm32f4x: add F401 and F411 IDsUwe Bonnes
Change-Id: I12079586dafb8a7614bdf4cc0b13cd5030301742 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2379 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-10-06cfg: remove incorrect execute permissionsSpencer Oliver
Change-Id: I0ba9dfdf876bc99df4e2d1f1f3bc0c9ccc6c98c2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2333
2014-10-06stm32: add L0xx CPUTAPIDRémi PRUD'HOMME
Add CPUTAPID for stm32 L0xx mcu devices. Using -expected-id to add the new id with the id for L1xx devices. This for reduce the duplicated code. Change-Id: I48bd230884ecf38fa200c620b547bdf3b5f59132 Signed-off-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-on: http://openocd.zylin.com/2315 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-22target: Remove "-variant" argumentAndreas Fritiofson
Remove this underutilized feature. Despite the fact that a lot of configs specifies a arbitrary "variant", only the xscale target actually defines any. In the case of xscale, the use of -variant is dubious since 1) it's used as a redundant irlen specifier, 2) it carries a comment that it doesn't really need it and 3) only two xscale configs even specify it. If there's a future target that needs a variant set, a target specific option could be added when needed. Change-Id: I1ba25a946f0d80872cbd96ddcc48f92695c4ae20 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2283 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-08cfg: refactor lpc1xxx targets onto one base configVanya Sergeev
Since now auto-detection for flash size works nicely, there's no reason to keep numerous configs around. Change-Id: If0cbc37985abf17ef7c1f7d0688e76500fac228f Signed-off-by: Vanya Sergeev <vsergeev@gmail.com> Reviewed-on: http://openocd.zylin.com/1960 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-08tcl/target: add config for К1879ХБ1Я, a hybrid ARM11/DSP SoC by RC ModuleБурага Александр
This adds config to allow JTAG debugging of an ARM core of a modern hybrid SoC by Research Centre "Module" (http://www.module.ru/en/company/). К1879ХБ1Я is targetted at set-top boxes and other multimedia equipment, the official SDK is Linux-based. Change-Id: Ib2ae5784d25699f952682e66b025a3f677a76d5d Signed-off-by: Бурага Александр <dtp-avb@yandex.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2272 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08tcl/target/imx6: add yet another SJC tapidPaul Fertser
This is for mx6q TO1.1. Change-Id: Id6af2ed232fc19be9bf49eb6d2df0004c6668698 Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2253 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11nRF51822: Add workaround for PAN-16 where not all RAM blocks reliably ↵Angus Gratton
enabled on reset According to Nordic Semiconductor Product Anomaly Notice (document NRF51822-PAN), item 16, some revisions of nRF51822 sometimes reset without all RAM blocks enabled. This was noted on NRF51822-QFAA rev CA/C0, only 8KiB of memory was accessible. This patch turns on all RAM following a debugger induced reset (matches specified behaviour.) Change-Id: I4f8be4ec3d1271da7fe5bc9a084fdcb2968535bb Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2202 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11tcl/target: added support for TI OMAP/AM 3505 and 3517Andrey Skvortsov
added TAPID for OMAP/AM 3505 and 3517. Tested on TAM3517 Twister board with AM3517 SoC. Change-Id: I78a3268a4adb18092c694a556538c99c9032f648 Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/2127 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser
This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-07-10tcl/target/stm32l: restore slow clock on resetPaul Fertser
Change-Id: I63eafaa38b188fe50c13ab966be44a3eaa2006b0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2188 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-07-08cfg: Rename leftover cortex_a8 -> cortex_aAndreas Fritiofson
Change-Id: Id11d89ae2fb78854da4284afb7f14d8a892a2e49 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2197 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-28Auto-select JTAG transport when appropriatePaul Fertser
I looked through all the target configs after stripping comments and such from them with sed to see what jtag-specific commands can appear first, and it looks like all the meaningful combinations should be covered. Change-Id: I8d543407b7f4ac8aca7354ecd50e841c8a04d5f3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2179 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28cortex_m: Do additional initialization during resetAndrey Smirnov
SAM4L requires additional steps to be taken right after SYSRESETREQ is issued in order to function robustly: - CMSIS-DAP DAP driver needs to explicitly check for sticky bit errors since it is possible for adapter to perform successful write opration, report no errors and then, under the hood, do some other things that will result in sticky bit being set. - Debugger needs to wait for security system to finish intialization and assert CDBGPWRUPACK before proceeding This change is related to commit http://openocd.zylin.com/#/c/1995/ Change-Id: I741c95a809bfd60d930cec9482239e4796a62326 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2088 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com>
2014-06-28tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handlerPaul Fertser
Barely tested with plain SWD transport. Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2003 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-22tcl/target/fm3.cfg: use a CHIPNAME known by the flash driverPaul Fertser
fm3 flash driver needs to know which chip variant is used. This fixes "unknown fm3 variant: mb9bf500.cpu" error if the config is used as is. Change-Id: I500fcfb413f23ee246678cec5bd19d14139a28e2 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22openrisc: add support for JTAG Serial PortFranck Jullien
Change-Id: I623a8c74bcca2edb5f996b69c02d73a6f67b7d34 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/2162 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22tcl/target/am335x.cfg: Drop gdb-attach stanzaTom Rini
This isn't needed nor a recommended practice now, was a simple copy/paste from amdm37x.cfg anyhow. Change-Id: I064226dc859d7563cfad945b577279fc37448645 Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2068 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01tcl/target/kl25.cfg: add maximum speed specificationPaul Fertser
Maximum frequency wasn't tested on hardware but the docs seem to be quite explicit and do not mention any restrictions for that. Change-Id: Idcf58df5358d06525e683f07c76eedad8f0b292d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2120 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01tcl: add ASUS RT-N66U configPaul Fertser
CFI flashing verified with real hardware. RAM configuration wasn't attempted. Change-Id: I9185ab71430d799793befef708a15f62edba1663 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2153 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-16KS869x: add new targetYegor Yefremov
This patch adds Micrel's KS869x target. The configuration was taken from http://www.mmnt.net/db/0/0/www.micrel.com/ethernet/8695 - Micrel's FTP server i.e. their OpenOCD 7.0 package. The only change compared to the original file is the removal of reset configuration, as it belongs to the board configuration. Change-Id: Ic8509aa5fe5ce3166a3129e1c055280a3b2b9312 Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com> Reviewed-on: http://openocd.zylin.com/2125 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-05-10kinetis: Revise CPU un-securing codeAndrey Smirnov
Old version of the code had several problems, among them are: * Located in a generic ADI source file instead of some Kinetis specific location * Incorrect MCU detection code that would read generic ARM ID registers * Presence of SRST line was mandatory * There didn't seem to be any place where after SRST line assertion it would be de-asserted. * Reset was asserted after waiting for "Flash Controller Ready" bit to be set, which contradicts official programming guide AN4835 * Mass erase algorithm implemented by that code was very strange: ** After mass erase was initiated instead of just polling for the state of "Mass Erase Acknowledged" bit the code would repeatedly initiate mass erase AND poll the state of the "Mass Erase Acknowledged" ** Instead of just polling for the state of "Flash Mass Erase in Progress"(bit 0 in Control register) to wait for the end of the mass erase operation the code would: write 0 to Control register, read out Status register ignoring the result and then read Control register again and see if it is zero. * dap_syssec_kinetis_mdmap assumed that previously selected(before it was called) AP was 0. This commit moves all of the code to kinetis flash driver and introduces three new commands: o "kinetis mdm check_security" -- the intent of that function is to be used as 'examine-end' hook for any Kinetis target that has that kind of JTAG/SWD security mechanism. o "kinetis mdm mass_erase"" -- This function removes secure status from MCU be performing special version of flash mass erase. o "kinetis mdm test_securing" -- Function that allows to test securing fucntionality. All it does is erase the page with flash security settings thus making MCU 'secured'. New version of the code implements the algorithms specified in AN4835 "Production Flash Programming Best Practices for Kinetis K- and L-series MCUs", specifically sections 4.1.1 and 4.2.1. It also adds KL26 MCU to the list of devices for which this security check is performed. Implementing that algorithm also allowed to simplify mass command in kinetis driver, since we no longer need to write security bytes. The result that the old version of mass erase code can now be acheived using 'kinetis mdm mass_erase' Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU. Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b Signed-off-by: Andrey Smrinov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2034 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-05generalplus: Add configuration file for General Plus GP326XXXA seriesAndrey Smirnov
Add configuration file for General Plus GP326XXXA series. Tested on GP326833A on GPC-1737B board. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: I1ad0e22598b01317bbc823870a7a262e9192c595 Reviewed-on: http://openocd.zylin.com/2058 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-14cortex_a: fix endiannes issues on TI TMS570Seth LaForge
The TI TMS470 and TMS570 series of processors are BE-32 processors, despite BE-32 not being supported by ARM in the Cortex-R4 core. TI hacked in BE-32 support, which requires odd swizzling in OpenOCD to make memory reads and writes function correctly. In particular, without this change, OpenOCD word reads and writes had the bytes reversed, and halfword and byte packed reads were reading garbage. In my testing, this change fixes these problems. Change-Id: I21dd30f4b9003f20fcc85f674ab833407bb61f74 Signed-off-by: Seth LaForge <sethml@google.com> Reviewed-on: http://openocd.zylin.com/2064 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-04-14tcl: bcm6348 target config, BT HomeHub v1 board configLee Bowyer
Also add the board to the firmware recovery script. Change-Id: I4f9c895dae171df7249e3b1c0563b288518b9fe0 Signed-off-by: Lee Bowyer <lee@sodnpoo.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29tcl/target: make milandr configs swd-compatiblePaul Fertser
Change-Id: Ibb34f0d7829b205341bcce511ffc2624bdfe2c75 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1962 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29nrf51: Add UICR writing supportAndrey Smirnov
SoftDevice stack ihex binary, provided by Nordic expects being able to write data necessary for its correct operation at the adresses inside UICR. This patch exposes UICR region of flash as a second bank on the MCU to facilitate that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9 Reviewed-on: http://openocd.zylin.com/2013 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29tcl: add Zynq-7000 target and Zedboard board configsTim Sander
Change-Id: Ia7f2a57d1b32dda9936ad87e22635f7749ff3ce1 Signed-off-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2061 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 04:33:27 +0000