aboutsummaryrefslogtreecommitdiff
path: root/tcl/target/stm32f3x.cfg
AgeCommit message (Collapse)Author
2020-01-29tcl: replace the deprecated commands with "adapter ..."Antonio Borneo
Avoid annoying "deprecated" messages while running the scripts distributed with OpenOCD code. Change automatically created with commands sed -i 's/adapter_khz/adapter speed/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_delay/adapter srst delay/g' $(find tcl/ -type f) sed -i 's/adapter_nsrst_assert_width/adapter srst pulse_width/g' $(find tcl/ -type f) Minor indentation issue fixed manually in tcl/board/at91sam9g20-ek.cfg tcl/target/at91sam9260_ext_RAM_ext_flash.cfg Change-Id: I425fd56c0c88cd6b06124621306eeb89166dfe71 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/5284 Tested-by: jenkins Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2018-03-30target: restructure dap supportMatthias Welwarsky
- add 'dap create' command to create dap instances - move all dap subcmmand into the dap instance commands - keep 'dap info' for convenience - change all armv7 and armv8 targets to take a dap instance instead of a jtag chain position - restructure tap/dap/target relations, jtag tap no longer references the dap, daps are now independently created and initialized. - clean up swd connect - re-initialize DAP also on JTAG errors (e.g. after reset, power cycle) - update documentation - update target files Change-Id: I322cf3969b5407c25d1d3962f9d9b9bc1df067d9 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4468 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2016-11-04cfg: Don't check BS TAP IDCODE in STM32 configsAndreas Fritiofson
Instead of updating these regularly we can just accept any IDCODE for the boundary scan TAP. The only downside might be that it's not immediately obvious if you source a config for the wrong type of STM32. Change-Id: I96d4d81699a491b3a46de3f0d3fd078ffddad4e4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3385 Tested-by: jenkins
2015-11-12stm32xxx.cfg: Only touch IWDG and WWDG in DBGMCU_APB1_FZ.Uwe Bonnes
Change-Id: Ie0298c8e73bebeccc9346534d63aab4cae49e4f7 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3104 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2015-04-16tcl/target/stm32f3: fix reset init for stlinkPaul Fertser
Use mmw to manipulate only selected bits of the word. msb and mwb verify the memory location and may error on PLLRDY set as a result of PLLON written. Change-Id: I9a4c1e58f002a1e5e99be1bd34aac27ba65d111d Reported-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2702 Tested-by: jenkins
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
This provides support for various trace-related subsystems in a generic and expandable way. Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2538 Tested-by: jenkins
2015-03-09tcl: Add default hooks for STM32F3xAndreas Fritiofson
Keep clocks running in low power modes. Stop watchdogs from interfering with the debug session. Set up PLL and increase clock at reset init. Change-Id: I984d2018f7d47a1042f1e12894563154fa7b566c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2196 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-03-09stm32f3x.cfg: Remove duplicate item.Uwe Bonnes
Change-Id: I812c36688add73fab2e74fc112c733c5d3c201a6 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2554 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2435 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-26cfg: add srst_nogate to the supported targets, remove from board configsPaul Fertser
It depends on the particular target whether it can work with SRST asserted or not, so this belongs to the target config rather than the board config. Also, this allows for simple openocd -f myboard.cfg -c "reset_config connect_assert_srst" command to be used whenever a user feels a need to connect to an unresponsive target. Change-Id: I3d8da9ae47088fc0c75a20bfdd20074be1014de0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15target/stm32xx: Endian is not configurable.Karl Palsson
So remove it from all the configs, it's misleading, and leads to cargo culting of config files. Change-Id: I2b77e60d5e96f9759c7c9fc91b20e73be2e95d9a Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser
This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-28tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handlerPaul Fertser
Barely tested with plain SWD transport. Change-Id: I48b59136bf4294ffed737dba01f1b30ef83aa86b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2003 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-01-09cfg: add stm32 cmsis-dap compliant configSpencer Oliver
Change-Id: I3cfb21fdcef830e22b03bf4b5d58993728cc7475 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1543 Tested-by: jenkins
2013-04-28target: rename cortex_m3 to cortex_mSpencer Oliver
Rename cortex_m3 target to use a more correct cortex_m name. This also adds a deprecated_name var so that older scripts issue a warning to update the target name. cfg files have also been updated to the new target name. Change-Id: Ia8429f38e88da677249c5caa560c50f8ce56ea10 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1129 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21stm32f30x: Add boundary scan TAP ID to match siliconAndreas Fritiofson
Change-Id: I74ef3cfc437540aedd99da46ac3e0c6cd9c5cd8d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1354 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-11flash: add stm32f3x supportSpencer Oliver
add support for the new stm32f3x family from stmicro: http://www.st.com/stm32f3 Change-Id: Icd1db95bb2767d9c0ecef24deefa92b4fdaa4f14 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/735 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 20:50:20 +0000