aboutsummaryrefslogtreecommitdiff
path: root/tcl/interface/ftdi
AgeCommit message (Collapse)Author
2015-02-11tcl/interface/ftdi: correct LED config for BusBlaster KT-LinkAnton Kuzmin
Configure the LED to be off by default, blink on activity. Change-Id: I8515ee66c49bddf866268b85811be15c2dbc086c Signed-off-by: Anton Kuzmin <anton.kuzmin@cs.fau.de> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2539 Tested-by: jenkins
2015-01-15tcl/interface/ftdi: add config for the IoT-LAB adapterPaul Fertser
This is an integrated adapter used on the IoT-LAB boards. Schematics are available from https://github.com/iot-lab/iot-lab/wiki/Docs/openm3-schematics.pdf Change-Id: I1c80e72653c3f319bb04d01e3dfddb1c2447c398 Tested-by: Quentin Lampin <quentin.lampin@orange.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2415 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-02tcl/interface/ftdi/swd-resistor-hack: clarify and add schematic diagramPaul Fertser
Change-Id: I8600ee983de85e4225430ae508a50cd938122d89 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2357 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-10-06interface/ftdi/olimex-arm-usb-ocd-h: fix nTRST control definitionPaul Fertser
According to my inspection of an Olimex ARM-USB-OCD-H adapter ACBUS0 is connected directly to an SN74LVC2T45 buffer input B2, and the corresponding output A2 is connected directly to the JTAG connector. It seems the information in the Olimex flyer is incorrect for the -H version and TRST can't be tri-stated, ACBUS2 is unused. The older ARM-USB-OCD device has SN74AC244 for an output buffer and ACBUS2 controls its !2OE, ACBUS0 connected to 2A1 (2Y1 is nTRST), in accordance with the information flyer. Change-Id: I22828b7b959b6f62c3f51367feb8fab9705641e5 Reported-by: Tim Sander <tim@krieglstein.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2286 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Tim Sander <tim@krieglstein.org>
2014-09-11tcl/interface/ftdi/sheevaplug: fix device descriptionPaul Fertser
Without this SheevaPlug debugging interface can't be matched. Change-Id: Ifca149130d03c1aa165ed1123e8540e49485f023 Reported-by: Andreas Schneider <schneider.andi@gmail.com> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2265 Tested-by: jenkins
2014-09-08tcl/interface/ftdi: fix TRST for Olimex TINY adaptersPaul Fertser
According to the research by Eldar, TINY-H adapter has nTRST connected to ACBUS0 directly via a 100 Ohms series resistor. I think it's safe to assume the older TINY adapter does the same. See high-res photos at [1]. This patch should fix issues with JTAG for the case when nTRST is actually connected but is missing from the config. [1] https://wikidevi.com/wiki/Olimex_ARM-USB-TINY-H Change-Id: Iaaee7be30536ebb502802d38b82cd9573408f854 Reported-by: Хайруллин Эльдар <eldar.khayrullin@mail.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2247 Tested-by: jenkins Reviewed-by: demokmail <demokmail@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-09-08tcl/interface/ftdi: add kt-link config (with SWD) for DP BusBlasterPaul Fertser
Change-Id: Icbeca8c0c3845c0b777fb2e4c81b17e7b7cc5ff8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2269 Tested-by: jenkins Reviewed-by: Ben Gamari <bgamari@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-19tcl/interface/ftdi: auto-select SWD from converters' configsPaul Fertser
When you source a JTAG-SWD converter config, any other transport doesn't make any sense, so just autoselect it right there. Change-Id: I6c098740905a0d4007473fc19cc07e11cbcc9369 Suggested-by: Хайруллин Эльдар <eldar.khayrullin@mail.ru> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2248 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru>
2014-08-04interface/ftdi: Mark flyswatter.cfg as testedAndreas Fritiofson
- Flyswatter + Proxmark3 (Atmel AT91SAM7S256) - works - Flyswatter + Tiva Launchpad (EK-TM4C123GXL) - works Change-Id: I615e0ff9262be6ae1064fb2de8e6e810775e7db4 Tested-by: Ondrej Mikle <ondrej.mikle@nic.cz> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2237 Tested-by: jenkins
2014-06-28cfg: add SWD configs for stellaris ftdi based adaptersSpencer Oliver
Tested on hardware. Change-Id: Ib0191e97988dc79e9a62da74bd7fe25f548ff5a2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2185 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2014-06-28tcl/interface/ftdi: add SWD configs for kt-link, olimex, rowley and resistor ↵Paul Fertser
hack Resistor hack is runtime-tested, other configs are based on schematics. Change-Id: I8daffa0434cd41d142fbec7c230a302284f7aa31 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2184 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-06-28jtag/drivers/ftdi: require defining SWD_EN signal for SWD modePaul Fertser
Use a special signal instead of a dedicated swd mask. Amend jtag-lock-pick_tiny_2 config accordingly. Change-Id: Ifb007a0b5434b590c52f936efd5f5458e913e2e4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2183 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2014-06-28cfg: Add SWD support to JTAG-lock-pick Tiny 2Andreas Fritiofson
Change-Id: I61eac507fa6861b7daf603ebca58e8bf3cc699c1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2136 Tested-by: jenkins Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17tcl/interface/ftdi: add Digilent JTAG-SMT2 configPaul Fertser
Tested on ZedBoard by Tim Sander. Change-Id: I4316d9b4d36f01bbe91a46c78ea8bca22efb1a5a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2029 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-09interface/ftdi/xds100v2.cfg: Add another VID/PID, drop descTom Rini
The XDS100v2 is often embedded in a number of platforms using the VID/PID of 0x0403/0x6010 and a generic FTDI device description. Add this VID/PID combination and remove the description line. Change-Id: I370e6199ac24f802426e9541e19ee38f18f1209a Signed-off-by: Tom Rini <trini@ti.com> Reviewed-on: http://openocd.zylin.com/2016 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-11interface/ftdi/xds100v2.cfg: default to reset state and ask user to release ↵Paul Fertser
it later This adapter is special and needs a reset sequence to be performed before operation. Since there're no suitable hooks to do that, we have no choice but to ask the user to manually add the necessary commands to his or her config file. Change-Id: I48fb4276e77529768266840221b68c3ae26801e1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1884 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-04interface/ftdi: add TUMPA Lite configPaul Fertser
TUMPA Lite is a cheap FT232H-based breakout board, without any buffering. It also lacks series resistors so for some targets (especially when not using ridiculously short wires) one needs to add about 47 Ohms in series on every high-speed line. The SRST line is connected directly to the FT232H too. Real-life tested (including SRST and TRST). Change-Id: I5ed4f88d8d20384e9c52efe2ff0c290e2650d43e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1918 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-14ftdi/neodb.cfg: mark as testedPaul Fertser
Working against openmoko gta02 target, including TRST and SRST (the stupid samsung chip fully resets under trst, so it's actually of little use here). Change-Id: I831124659fc12efbccef536f07d15509c2112f92 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1814 Tested-by: jenkins Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31ftdi/tumpa.cfg: enable proper output buffer control, add another USB IDPaul Fertser
The schematics used for writing the config file were incorrect, real hardware needs ACBUS3 _low_ as it's connected directly to the output buffer's !OE pin. Also apparently sometimes TUMPA comes with default FTDI IDs. Real-life tested (including TRST and SRST) with a custom stm32f103 board, thanks to Mike Wang for the adapter sample. Change-Id: Iab566e6d14f8392030f6ff2c8d976e1b57cf5ce6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1789 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29Added new ftdi interface devicePushpal Sidhu
Added new configuration file for gw16042 device. Also added this to interface/ftdi examples in documentation. Change-Id: I07bb10bfc79a5d13007288cd57f254d889075214 Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com> Reviewed-on: http://openocd.zylin.com/1563 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15interface/ftdi/tumpa: remove ftdi_device_desc as it's incorrectPaul Fertser
The end users on IRC report that actual USB device has different information in its descriptor so it doesn't match. Remove it altogether. Change-Id: Id7841667390a514581e630e67b9283675803135b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1548 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-09remove the untested warning in ftdi/olimex-arm-usb-tiny-h.cfgSergey Alirzaev
the dongle seems working, including srst signal Change-Id: I5da9046bd8a35d8d826f1b663c01bd2600a6cf14 Signed-off-by: Sergey Alirzaev <zl29ah@gmail.com> Reviewed-on: http://openocd.zylin.com/1545 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15ftdi/board: Add support for DENX M53EVKMarek Vasut
Add support for DENX M53EVK board and it's integrated on-board JTAG adapter using FT2232H. Change-Id: I022dcafa7799bb84a7873ba67ed82f1e49094320 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/1461 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-09ftdi/xds100v2.cfg: Remove the warning as it has been testedLaszlo Papp
Change-Id: I3a8711867e247bc49caa79274ae882f07719d4ce Signed-off-by: Laszlo Papp <lpapp@kde.org> Reviewed-on: http://openocd.zylin.com/1492 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-07-08cfg: Update Flyswatter 2 URLAndreas Fritiofson
It pointed to the Flyswatter 1 page. Change-Id: Ib7e82669a31cad2bf8f6ba4a60b25ef9920b2584 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1478 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12ftdi: config for TUMPAPaul Fertser
Add a config file for TIAO USB Multi-Protocol Adapter. Based on schematics from http://www.mediafire.com/?zv158nnx1gv0cy2 Cc: Volkan K <volkan-k@users.sourceforge.net> Change-Id: I0dfd93b0b1e558e4ccd7c94c005c099947ec94df Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-05-29interface/ftdi: remove "untested" warning from DP BusblasterPaul Fertser
This is reported as working by mitsakos on IRC. Change-Id: I26b97779c3e8e237c5b3996aa81183031b12ec0c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1419 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-07interface: opendous_ftdi config file addedRodrigo Melo
This config file add support to the opendous cable based on the chip ft2232H, using the ftdi interface driver. Change-Id: I4491f99d7b14f7078a04583ef0c4acd8692c4349 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1097 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-28ftdi/flyswatter2.cfg: Define the LED signalPeter Stuge
Change-Id: Ic5d85c0d855bcffba54de7df6cff4d726656af97 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/940 Tested-by: jenkins
2012-10-28ftdi/flyswatter2.cfg: Fix the signal layoutPeter Stuge
Change-Id: If6612af25fa3562f49e9c8ccff01b6ef0af5ceb0 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/938 Tested-by: jenkins
2012-10-02lpc1768-stick: avoid driving srst high at startupSpencer Oliver
this avoid driving nSRST high after startup, by making sure the nOE is initialized inactive/high. This also matches the config used for the STM32-PerformanceStick. Change-Id: I9376de575b7dc834310d57dbd58575d51f60183e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/878 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: cortino tested and workingSpencer Oliver
Change-Id: I13534742c76ebbb05b47bf98768c997068da747a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/851 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect cortino reset configSpencer Oliver
The cortino uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I28f6781bccae24de79aa6a03161f298a14fe2581 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/850 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: ftdi icdi enable srst open drain configSpencer Oliver
Change-Id: I21a115121f167dc88cd9bf2d1ca1ac9f3e1110d7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/848 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: lm3s811ek config tested and workingSpencer Oliver
Change-Id: I5402b5521d6e1ef0a569f5cad02c003681f5444b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/847 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect stm32-performance stick configSpencer Oliver
This hardware uses a output enable buffer that was not correctly defined. Fixes issues when using the new ftdi driver. Change-Id: Iba6235a71a6d3c7d16ab729f858b336a4574dfea Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/844 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2012-10-02cfg: stm32-performance stick config tested and workingSpencer Oliver
Change-Id: I9852d11e369e501af240a2b8e9f74306aee4e4a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/845 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: str9-comstick tested and workingSpencer Oliver
Change-Id: Ia6c45477381e78cb9508b4731438161e18be1f38 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/843 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02cfg: fix incorrect str9-comstick reset configSpencer Oliver
The str9-comstick uses a direct srst connection rather than via any buffer. As a result this fixes issues with the newer ftdi driver. Change-Id: I0968e8459997a6a2b7bf0c46e89662cd57b4f496 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/842 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-29Add JTAG-lock-pick Tiny 2 config filesFreddie Chopin
DISTORTEC's JTAG-lock-pick Tiny 2 is a new interface using FT232HL chip and layout similar to KT-LINK. Change-Id: I2831b169cd448ca70397f2dd86c5b749dda3dabf Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/787 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-08-24ftdi: Olimex ARM-USB-TINY validatedAurelien Jacobs
Flashing a CFI flash and debugging with gdb work fine. Change-Id: Ib2578ee6f41c1003968198439033d00d805122f7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/770 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-09cfg: added new openocd-usb highspeed adapterAndrew Karpow
The embedded projects shop released a new highspeed version of the openocd-usb adapter. These configuration files adds support for it. Change-Id: I9b23d7889f998712b9041af101e3f0b9aba85b28 Signed-off-by: Andrew Karpow <notandyk@gmail.com> Reviewed-on: http://openocd.zylin.com/771 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-01cfg: Add Hitex LPC1768-Stick using ftdi driverJoerg Fischer
Add cfg files for Hitex LPC1768 Stick Website: http://www.hitex.com/?id=1602 This board has a FTDI2232D as JTAG interface, using the same layout as the Hitex STM32-PerformanceStick but with different USB PID. Main MCU is a LPC1768 from NXP. The interface config uses the ftdi driver instead of ft2232. The corresponding ft2232 layout would be "stm32stick". Change-Id: I1fd15588c5af35f7d51777d1ad958cc1dc72c6f7 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/763 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 4 - files that are currently untested Change-Id: Ic4a08fdefc99e7a9d50885c888c3fca60ffa39bd Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/750 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 3 - files that are currently untested but verified with schematics Change-Id: Ia00c3b6437bffcfa0d178e779926ad9309e289fe Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/755 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 2 - files that are currently untested but assumed to work, as other configs using the same layout work fine Change-Id: Ifaa1904227ebdc394362ccaf3ad3c5384a716657 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/754 Tested-by: jenkins
2012-08-01cfg: Add config file variants using the ftdi driver instead of ft2232Freddie Chopin
part 1 - files that were tested an verified as working fine Change-Id: If5986853a1cf118a9eb3b4c13b036d0f71c39624 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/534 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 03:37:45 +0000