aboutsummaryrefslogtreecommitdiff
path: root/tcl/board
AgeCommit message (Collapse)Author
2019-05-20tcl/board: Add Renesas RZ/A1H GR-Peach boardMarek Vasut
Add configuration for the Renesas RZ/A1H GR-Peach board, which is a cheap development kit for the RZ/A1H SoC. Change-Id: I7f5596ae47e6dff8e6d06cffd4dddca20f57d0ca Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/5142 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-04-24tcl/board: Add config for the Amazon Kindle 2 and DXAlexander Kurz
Add a config to access the Amazon Kindle Model No. D00701 and D00801. Both ebook readers are based on a Freescale i.MX31. A JTAG interface is included in a 40 pin FFC connector marked "J9" on both variants. Change-Id: I58bb1ded3d6706bc3798af488ca8bafb7dc45225 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3956 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-02-05flash/nor: flash driver and cfg for SAM E54, E53, E51 and D51Tomas Vanek
The new Microchip (former Atmel) series powered by Cortex-M4 looks very similar to older M0+ powered SAM D2x at the first sight. Unfortunately the new series differs a lot in important details. NVMCTRL has different register addresses, moved important bits and even changed binary command set. An universal driver for all SAM D/E would be very complicated. That's why a new driver was derived. Tested on Microchip SAM E54 Xplained Pro kit (board cfg included). Adjusted for the restructured dap support. Checked by valgrind and clang static analyzer. Change-Id: I26c67047a552076f4b207b9b89285a53d69b4ca4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4272 Tested-by: jenkins Reviewed-by: Andres Vahter <andres.vahter@gmail.com>
2019-01-26tcl: Support for Analog Devices ADSP-SC58x / ADSP-SC584-EZBRDPeter Lawrence
The original script was broken by changes to the Cortex-A code. The recent introduction of the mem_ap target provided a new mechanism to allow the script to be fixed. This also adds an example board script for the ADSP-SC584-EZBRD. Change-Id: I36bc1ac6b6c036539f4175f1e65223ba10a35355 Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/4855 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2019-01-23Correct ZynqMP configuration to be appropriately namedJonathan McDowell
The xilinx_ultrascale.cfg target is actually the configuration for a ZynqMP, which is a combination of an UltraScale+ FPGA core and a quad core A53. Update the filename/comments to reflect this, and include the tap IDs for all known FPGA cores for this part. Change-Id: I70dfcc99861a482b83b6a795e83021d9cf1fe047 Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/4850 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2019-01-02flash: nor: ath79: remove base calculationOleksij Rempel
Currently it is impossible to flash ELF with correct offsets. The reason is a bogus offset calculation extracted from base. Since any other spi drivers do not care about base, do the same for ath79 as well. Change-Id: I9e46e01c9e7a709c2d07da9203c634f302603afd Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4821 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-12-12fix cc32xx related changesJiri Kastner
original CC3200 launchpad works only with ti-icdi driver which stopped to work after merging to master commit d02de3a8a92091b9761ebaf44dff1a71f5b2edcb Change-Id: I247b5d99831fa744de1fdc5b8a7cffdf49fe953c Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/4792 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2018-11-26tcl/target, board: remove useless gdb-attach event definitionsTomas Vanek
Since commit bae76053dc515252dc5c8235b9a848e461080c66 gdb-attach event is defined as halt by default. Remove useless and in case of bcm281xx wrong definitions of the event. Change-Id: I8e69780a93722eb9392673303f54d502e71eceb6 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/4763 Tested-by: jenkins Reviewed-by: Steven Stallion <sstallion@gmail.com>
2018-10-27tcl/board: Add Arty-S7 Spartan 7 FPGA Development BoardWilliam D. Jones
Change-Id: I8bfe780cb67a1777d5112a68e8a9781bfe4f2038 Signed-off-by: William D. Jones <wjones@wdj-consulting.com> Reviewed-on: http://openocd.zylin.com/4525 Reviewed-by: Robert Jordens <jordens@gmail.com> Tested-by: jenkins Reviewed-by: Rohit Singh <rohit91.2008@gmail.com> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-10-17tcl: Add support for the Numato Lab Mimas A7 boardRohit Singh
The Mimas A7 FPGA board has FTDI FT2232 whose channel B is connected to Artix-7 FPGA's JTAG interface. Hence, OpenOCD can easily interface with it via the its ftdi driver interface. Tested to be working great up to 30 MHz. Change-Id: Ieda015fbc6135bf95ad5a069cbf38650da45911e Signed-off-by: Rohit Singh <rohit91.2008@gmail.com> Reviewed-on: http://openocd.zylin.com/4720 Tested-by: jenkins Reviewed-by: Tim "mithro" Ansell <me@mith.ro> Reviewed-by: Robert Jordens <jordens@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-10-01tcl/board: Add Renesas R-Car Salvator-X(S) boards.Adam Bass
Add configuration for the Renesas R-Car Salvator-X and Renesas R-Car Salvator-XS boards. Change-Id: I898008f56adb31908d30760f18217583fabf1c51 Signed-off-by: Adam Bass <adam.bass@renesas.com> Reviewed-on: http://openocd.zylin.com/4670 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-09-12tcl/board: Add Emcraft imx8 SOM BSB supportGuido Günther
Tested with Olimex ARM-USB-TINY-H adapter Simple commands work fine but there are currently issues when attaching remote gdb or running virt2phys: https://sourceforge.net/p/openocd/tickets/201/ Change-Id: I86ccf1d93c5d23870bb522f92b3e2af190d529e8 Signed-off-by: Guido Günther <agx@sigxcpu.org> Reviewed-on: http://openocd.zylin.com/4646 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-08-14tcl/board: update all uses of interface/stlink-v2-1 to interface/stlinkCody P Schafer
Change-Id: I5e27e84d022f73101376e8b4a1bdc65f58fd348a Signed-off-by: Cody P Schafer <openocd@codyps.com> Reviewed-on: http://openocd.zylin.com/4456 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-31target|board: Add Intel (Altera) Arria 10 target and related boardOleksij Rempel
Target information about this SoC can be found here: https://www.altera.com/products/fpga/arria-series/arria-10/overview.html Achilles Instant-Development Kit Arria 10 SoC SoM: https://www.reflexces.com/products-solutions/development-kits/arria-10/achilles-instant-development-kit-arria-10-soc-som Change-Id: Id78c741be6a8b7d3a70f37d41088e47ee61b437a Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-on: http://openocd.zylin.com/4583 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-31tcl/board: add DPTechnics DPT-Board-v1Oleksij Rempel
it is Atheros AR9331 based IoT dev board. Change-Id: I6fc3cdea1bef49c53045018ff5acfec4d5610ba6 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4424 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-31tcl/target|board: move common AR9331 code to atheros_ar9331.cfgAntony Pavlov
The ar9331_25mhz_pll_init and ar9331_ddr1_init routines can be used not only for TP-Link MR3020 board, so move them to the common atheros_ar9331.cfg file. Change-Id: I04090856b08151d6bb0f5ef9cc654efae1c81835 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2999 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-31tcl/board: add config for 8devices LIMA boardOleksij Rempel
More information about this board can be found here: https://www.8devices.com/products/lima Change-Id: Id35a35d3e986630d58d37b47828870afd107cc6a Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4406 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2018-07-24Add RISC-V support.Tim Newsome
This supports both 0.11 and 0.13 versions of the debug spec. Support for `-rtos riscv` will come in a separate commit since it was easy to separate out, and is likely to be more controversial. Flash support for the SiFive boards will also come in a later commit. Change-Id: I1d38fe669c2041b4e21a5c54a091594aac3e2190 Signed-off-by: Tim Newsome <tim@sifive.com> Reviewed-on: http://openocd.zylin.com/4578 Tested-by: jenkins Reviewed-by: Liviu Ionescu <ilg@livius.net> Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-07-18flash/nor: add support for TI MSP432 devicesEdward Fewell
Added msp432 flash driver to support the TI MSP432P4x and MSP432E4x microcontrollers. Implemented the flash algo helper as used in the TI debug and flash tools. This implemention supports the MSP432E4, Falcon, and Falcon 2M variants. The flash driver automatically detects the connected variant and configures itself appropriately. Added command to mass erase device for consistency with TI tools and added command to unlock the protected BSL region. Tested using MSP432E401Y, MSP432P401R, and MSP432P4111 LaunchPads. Tested with embedded XDS110 debug probe in CMSIS-DAP mode and with external SEGGER J-Link probe. Removed ti_msp432p4xx.cfg file made obsolete by this patch. Change-Id: I3b29d39ccc492524ef2c4a1733f7f9942c2684c0 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4153 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-18tcl/board: add SAMD11 Xplained Pro evaluation boardPeter Lawrence
Change-Id: Id996c4de6dc9f25f71424017bf07689fea7bd3af Signed-off-by: Peter Lawrence <majbthrd@gmail.com> Reviewed-on: http://openocd.zylin.com/4507 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-18target: atmel samd10 xplained miniKarl Palsson
cortex m0+ on a tiny board, with an mEDBG (CMSIS-DAP) debug interface. Change-Id: Iaedfab578b4eb4aa2d923bd80f220f59b34e6ef9 Signed-off-by: Karl Palsson <karlp@tweak.net.au> Reviewed-on: http://openocd.zylin.com/3402 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-07-13tcl: board: Add NXP Freedom FRDM-LS1012A configAndreas Färber
An update for the K20 CMSIS-DAP firmware can be found here: https://community.nxp.com/thread/387080?commentID=840141#comment-840141 Change-Id: I149d7f8610aa56daf1aeb95f14ee1bf88f7cb647 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/4595 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-06-25tcl/board: Factor out common R-Car Gen2 codeMarek Vasut
Factor out the code shared by all R-Car Gen2 boards into a single file to get rid of the duplication. Change-Id: I70b302c2e71f4e6fdccb2817dd65a5493bb393d8 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4533 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-06-25tcl/board: Add Renesas R-Car R8A7794 E2 Silk boardMarek Vasut
Add configuration for the Renesas R-Car R8A7794 E2 based Silk evaluation board. Change-Id: I504b5630b1a2791ed6967c6c2af8851ceef9723f Signed-off-by: Marek Vasut <marek.vasut@gmail.com> --- NOTE: This requires SW7[1] in position 1 (default is 0) Reviewed-on: http://openocd.zylin.com/4532 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-06-25tcl/board: Add Renesas R-Car R8A7791 M2W Porter boardMarek Vasut
Add configuration for the Renesas R-Car R8A7791 M2W based Porter evaluation board. Change-Id: Iaadb18f29748f890ebb68519ea9ddbd18e7649af Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4498 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-06-25tcl/board: Add Renesas R-Car R8A7790 H2 Stout boardMarek Vasut
Add configuration for the Renesas R-Car R8A7790 H2 based Stout ADAS board. Change-Id: Ib880b5d2e1fab5c8c0bc0dbcedcdce8055463fe2 Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-on: http://openocd.zylin.com/4497 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-06-15flash/nor: Add support for TI CC26xx/CC13xx flashEdward Fewell
Added cc26xx flash driver to support the TI CC26xx and CC13xx microcontrollers. Driver is capable of determining which MCU is connected and configures itself accordingly. Added config files for four specific variants: CC26x0, CC13x0, CC26x2, and CC13x2. Note that the flash loader code is based on the sources used to support flash in Code Composer Studio and Uniflash from TI. Removed cc26xx.cfg file made obsolete by this patch. Change-Id: Ie2b0f74f8af7517a9184704b839677d1c9787862 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4358 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Fredrik Hederstierna <fredrik@hederstierna.com>
2018-06-06flash/nor: Add support for TI CC3220SF internal flashEdward Fewell
Added cc3220sf flash driver to support the TI CC3220SF microcontrollers. Implemented flash driver to support the internal flash of the CC3220SF. The implementation does not support the serial flash of the CC32xx family that requires connection over UART, and not via JTAG/SWD debug. Added config files for both CC32xx devices (no flash) and CC3220SF (with flash). Updated to implement comments from code review. Additional updates to handle remaining comments from review. Additional updates per review. Added code to only request aligned writes and full 32-bit words down to flash helper algorithm. Updated for recent changes in OpenOCD flash code. Removed cc32xx.cfg file made obsolete by this patch. Change-Id: I58fc1478d07238d39c7ef02339f1097a91668c47 Signed-off-by: Edward Fewell <efewell@ti.com> Reviewed-on: http://openocd.zylin.com/4319 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-04-23board: add configuration for stm32f103c8 "Blue Pill"Matthias Welwarsky
The "Blue Pill" is a popular development board with an STM32F103C8 micro controller. According to sources, it has a 128kB Flash on board even though the option bytes only report 64kB. This patch therefore also modifies target/stm32f1x.cfg to take an optional FLASH_SIZE variable into account which the board file sets to 0x20000. Change-Id: I8a78ccd2b5faf637c539ee3cf8136789ee15c95d Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4495 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-04-10target: add configuration for NXP MC-IMX8M-EVKMatthias Welwarsky
includes target configuration for i.MX8M SoC family, board file needs to set up CHIPNAME and CHIPCORES to match the actual hardware configuration Change-Id: Ieb6d89cab2477a58f85d0ef9cd242710950191c0 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4434 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-04-10tcl/board: add board configuration for NXP IMX7SABREMatthias Welwarsky
configuration also contains a reset-init procedure that disables the watchdog and initilizes the boards DDR memory so that you can upload baremetal (e.g. boot loader) code into DDR and start it from there. Change-Id: I4d2311b3708a5fcb5174a3447f34ae3904de7243 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4227 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30xilinx-dna.cfg: generic tools for reading Xilinx Device DNARobert Jordens
Most Xilinx FPGA devices contain an embedded, unique device identifier. The identifier is nonvolatile, permanently programmed into the FPGA, and is unchangeable providing a great serial / tracking number. This commit adds generic support for reading the Xilinx Spartan 6 and 7 Series (Kintex, Artix, Ultrascale) Device DNA. The code is similar to the function in fpga/xilinx-xc6s.cfg for Spartan 6 but the register addresses are different and the logic has been simplified. The code was not placed in xilinx-xc7.cfg. The approach of defining taps in the same file as library code to use them is fundamentally broken on boards that have more than one FPGA or other chips. This commit (like the addition of support for Xilinx XADC) starts to remedy that by splitting library code from board-specific fixed definitions. The support code is sourced in the Kasli and KC705 board support files as it was tested on these boards. Change-Id: Iba559c7c1b7e93e1270535fd9e6650007f3794da Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4396 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30tcl/fpga/xilinx-xadc.cfg: add support for XADCRobert Jordens
The 7 Series FPGAs contain an on-chip 12 bit ADC that can probe die temperature, internal power supply rail voltages as well as external voltages. The XADC is available both from fabric as well as through the JTAG TAP. This code implements access throught the JTAG TAP. https://www.xilinx.com/support/documentation/user_guides/ug480_7Series_XADC.pdf Change-Id: I6cef4d0244add71749fa28b58a736302151cc4dd Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4395 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30tcl/board: add support for KasliRobert Jordens
Kasli is an open hardware FPGA board. It is part of the Sinara family of devices designed to control quantum physics experiments (see Sayma_AMC for other boards already suppported by openocd). Kasli was developed as part of the opticlock project. It features a Xilinx Artix 7 100T FPGA, DDR3 RAM, a clock reconstruction and distribution network, four 6 Gb/s transceiver links (three SFP and one SATA) as well as interfaces to up to 12 Eurocard Extension Modules (EEMs). https://github.com/m-labs/sinara/wiki/Kasli http://www.opticlock.de/en/ Change-Id: I88b5e9f16b79e1e731056c45da6b5e1448d2c0e7 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4341 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30sayma_amc: add Sayma AMC board definitionRobert Jordens
Change-Id: I4a3dc5fe2d81b6906099af8cc1a360b3cf4a6b80 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4237 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30kcu105: add support for Xilinx KCU105Robert Jordens
* Development board with Kintex Ultrascale XCKU040 * Dual SPI 256 MBit flash, supported through xilinx_bscan_spi Change-Id: I478ec7481beedd270bfba8af56a93301b0ee3028 Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/4189 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-30tcl/board: add configuration for the avnet ultrazed-eg starter kitMatthias Welwarsky
also contains target configuration for the Xilinx UltraScale+ platform Change-Id: I6300cbc85c1ed71df71d8aaca59500bbf18f0093 Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com> Reviewed-on: http://openocd.zylin.com/4467 Tested-by: jenkins Reviewed-by: Matthias Welwarsky <matthias@welwarsky.de>
2018-03-07Added support for STMicroelectronics BlueNRG-1 and BlueNRG-2 SoCMichele Sardo
Added configuration files and flash loaders. Change-Id: I768eb3626f4e0eadb206bef90a867cc146fe8c75 Signed-off-by: Michele Sardo <msmttchr@gmail.com> Reviewed-on: http://openocd.zylin.com/4226 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2018-01-13ftdi swd: disable SWD output pin during inputPatrick Stewart
* Disables the data output pin while SWD is reading, so that a simple FTDI SWD interface can be made by connecting TCK to SWD_CLK and TDI+TDO directly to SWDIO. Enabled by setting SWDIO_OE to 0. Change-Id: I7d3b71cf3f4eea163cb320aff69ed95d219190bd Signed-off-by: Patrick Stewart <patstew@gmail.com> Signed-off-by: Roger Lendenmann <roger.lendenmann@intel.com> Reviewed-on: http://openocd.zylin.com/2274 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2018-01-13board: consolidate st_nucleo_l4 boardsPushpal Sidhu
We can now use the generic stlink.cfg which allows for both ST-LINK/V2 and V2-1 debuggers. Change-Id: I229c6fe5f6a6a4f2d3c787a49939846f102f9e24 Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com> Reviewed-on: http://openocd.zylin.com/4313 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-12-20config for ESPRESSObin from Globalscale Tech. Inc.Jiri Kastner
Change-Id: I77f536a9d2e901ebcef0a7dd0f205e5332b1d382 Signed-off-by: Jiri Kastner <cz172638@gmail.com> Reviewed-on: http://openocd.zylin.com/4303 Tested-by: jenkins Reviewed-by: Forest Crossman <cyrozap@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2017-12-12jtag: drivers: stlink: handle all versions with single configPaul Fertser
Extend HLA interface to allow multiple VID/PID pairs and use it to autodetect the connected stlink version. Change-Id: I35cd895b2260e23cf0e8fcb1fc11a78c2b99c69b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3961 Tested-by: jenkins Reviewed-by: Karl Palsson <karlp@tweak.net.au> Reviewed-by: Andreas Bolsch <hyphen0break@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-12-06Add STM32H7 config filesAlexandre Torgue
Add 2 target files: -stm32h7x.cfg -stm32h7x_dual_bank.cfg Add 2 config files for: -STM32H743zi-nucleo bord -STM32H743i and STM32H753i eval boards. Change-Id: I2aae2c5acff4f3ff8e1bf232fda5a11a87f71703 Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Reviewed-on: http://openocd.zylin.com/4182 Tested-by: jenkins Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
2017-10-27tcl/interface/ftdi/openrd: Fix FTDI channel + device descriptionJonathan McDowell
Similar to the Sheevaplug fix inf95f8b70fbd0f7e9c91a2d9006b1abb2dd07ebf2 the OpenRD device has its JTAG interface on the first channel of the ft2232, which is 0 for the new driver but was 1 for the old one. Correct the config file appropriately. Also the device description was missing the trailing " B" and thus not picking up the device correctly. Finally add an adapter_khz setting in the OpenRD board configuration file - set to 2MHz to match the Sheeva variant. Confirmed as working thanks to Phil Hands providing me access to his hardware to test on. See also Debian Bug#793214; https://bugs.debian.org/793214 Change-Id: Ifacf53124eaa330bbbdf36dfa79e3256bf2a5201 Signed-off-by: Jonathan McDowell <noodles@earth.li> Reviewed-on: http://openocd.zylin.com/4254 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-10-16tcl: add hi3798 target and Tocoding Poplar board configPeter Griffin
This config covers the 4x Cortex A53 CPUs. A custom connector is required from J14 to standard ARM JTAG on v1 boards. However v2 hardware should have a standard FTSH-105-01-L-DV connector. Pinmuxing code to enable JTAG pins is included in l-loader-poplar repository, so board is flashed with open source code, JTAG is available at very early boot. Alternatively the following pokes can be issued from U-Boot to enable JTAG (e.g. to debug hisilicon SDK). mw 0xf8a210ec 0x130; mw 0xf8a210f0 0x130; mw 0xf8a210f4 0x130; mw 0xf8a210f8 0x130; mw 0xf8a210fc 0x130; mw 0xf8a21100 0x130; Change-Id: I2b83dfcb3dc5461c1620f94dd99aa7b31fdda59b Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Reviewed-on: http://openocd.zylin.com/4161 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2017-10-03board: add TP-Link WDR4300 configOleksij Rempel
tested on TP-Link WDR4300 v1.7 Change-Id: If2b456afac835ab3a3987d434d20824c7ba75b93 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4192 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-10-03board: tp-link_tl-mr3020: add ath79 supportOleksij Rempel
Finally we can use this driver by default! Change-Id: I09d215d1bd1dc16873a7379637e6869af65ad8f1 Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/4193 Tested-by: jenkins Reviewed-by: Dmytro <dioptimizer@hotmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2017-04-24tcl/board: Add STMicroelectronics STM32F7 Nucleo configMarc Schink
Tested with STM32F746ZG Nucleo development board. Change-Id: Ia97b774b996a3be03e8e84342b93659c3632c18f Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3516 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24tcl STM32L0xx - add support for dual banked targets and for Nucleo-64 STM32L073Jan Čapek
- stm32l0_dual_bank.cfg - implement dual bank configuration - st_nucleo_l073rz.cfg - implement new board script Change-Id: Ie8063e5bec45069a63d414d81b2068fe3cc7e4d7 Signed-off-by: Jan Čapek <jan.capek@braiins.cz> Reviewed-on: http://openocd.zylin.com/3957 Reviewed-by: Cezary Gapiński <cezary.gapinski@gmail.com> Reviewed-by: Karl Palsson <karlp@tweak.net.au> Tested-by: jenkins Reviewed-by: Aurelio Lucchesi <me@0rel.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2017-04-24Add support for the ATMEL SAM G55 Xplained Pro board and CPU.Jerome Lambourg
Change-Id: Iffe59dcf9f2cb1f5949c37d11fe0d2141a47f8da Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3922 Tested-by: jenkins Reviewed-by: Leo Zhang <liang.zhang@microchip.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 19:00:28 +0000