aboutsummaryrefslogtreecommitdiff
path: root/tcl/board
AgeCommit message (Collapse)Author
2012-02-13add icnova_sam9g45_sodimm supportLars Poeschel
This adds support for in-circuit icnova sam9g45 sodimm: http://www.ic-board.de/product_info.php?info=p214_ICnova-SAM9G45-SODIMM.html|ICnova The NAND flash is not yet working. Change-Id: I94ca5203f8d8a55dec1e4e87cd0631bd2b8393f9 Signed-off-by: lars@kiwigrid.com Reviewed-on: http://openocd.zylin.com/418 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13topic: Add support for i.MX28EVKJames Robinson
Added the file imx28.cfg to the target directory Added the file imx28evk.cfg to the board directory Change-Id: I02a74a03f3773892f830d13660ffdded34f3261d Signed-off-by: James Robinson <jmr13031@gmail.com> Reviewed-on: http://openocd.zylin.com/428 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-10cfg: add revb ek-lm3s811 board configSpencer Oliver
Add board config for older (revb) ek-lm3s811 Change-Id: I75aca1714de3e88b60d00fa0f99f2c4b076b569c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/444 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-10cfg: add stm32ldiscovery board configSpencer Oliver
Change-Id: I392fdc4c588783fda1c7d4d6413b86ae9aa3f6b9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/442 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-02-07cfg: add stm32vldiscovery board configSpencer Oliver
Change-Id: I6343d1e61153ba71c71f8a473171972abb8e400d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/432 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-01-27STLINK: add stlink v1 configurationMathias K
Change-Id: I6b9de16879ff928d60e3c4a64731449275291cc2 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/397 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-09cfg: add stlink pseudo stm32 targetsSpencer Oliver
Change-Id: I71253c2090162b1214bbbb37396735bb9128f920 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/334 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2011-12-23Made BI-swap optional in mxc.Erik Ahlén
Change-Id: Ibdf3b1e415adcf1fdb38de25fe05da726ef58ca4 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/269 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-23Added board type as a parameter to mx2 NFC as they have different base ↵Erik Ahlén
addresses. Change-Id: I7bc326e9a8d9f6817f046a7faeebede567c53dd2 Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/268 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-12-19Renamed mx2/imx27 to mxc.Erik Ahlén
Renamed all functions, enums, structs and defines from mx2/imx27 to mxc. This is in preparation of adding support for mx35 NFC(v2). Change-Id: I92ad23f0cfab605215bbf0d5846c5c288423facf Signed-off-by: Erik Ahlén <erik.ahlen@avalonenterprise.com> Reviewed-on: http://openocd.zylin.com/267 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-12-06TCL/SPEAr: default one DDR chipAntonio Borneo
Handle default case of single DDR chip Propagate global variable for multi DDR chip Change-Id: I315380f91ee7fcc2976437aa5836d88a7964fc9d Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/251 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-22TCL/SPEAr: fix name of included fileAntonio Borneo
Fix error introduced in recent commit. Correct the name of the board file. Change-Id: I46bca8329812fb24bc4f8d316be9e7cba9b56496 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/234 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL: Add board file for EVAL_SPEAr320CPUAntonio Borneo
Initial support for SPEAr320 chip and for evaluation board named EVAL_SPEAr320CPU. Change-Id: I85524655769bcc610294a26db47a7a399256fbb7 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/231 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL: Add board file for EVALSPEAr300Antonio Borneo
Initial support for SPEAr300 chip and for evaluation board named EVALSPEAr300. Currently supports only those parts in common with SPEAr310. Change-Id: I8075aa721cf3dfaac561ee51e5df4ce9a2992e3e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/230 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL/SPEAr: Join two initialization files.Antonio Borneo
The support for SPEAr3xx family members does not require dedicated files for each member. Join the initialization scripts in a single file. Change-Id: I45e9dc64809a6f52c4592e3e0eef5529394887c6 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/227 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-21TCL/SPEAr: Add reference to ST Application NoteAntonio Borneo
ST-AN was mentioned but there was no reference Change-Id: Ie065f8faba94d63cf391a994ec895692d499394e Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/224 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-18scripts: use adapter_khz not deprecated jtag_khzSpencer Oliver
Change-Id: Ibaeebf564a95360dcf21a0921ec99f5263f11915 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/202 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-17configuration for Freescale TWRK60N512 boardTomas Frydrych
Based on the K40/Kwikstik config files Change-Id: Icb3adc7126bacea65209b712ebaa0eb3b894372e Signed-off-by: Tomas Frydrych <tomas@sleepfive.com> Reviewed-on: http://openocd.zylin.com/210 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-11-17config: do not use deprecated stm32.cfgFelix Ruess
Change-Id: Id72d2d7f874043331ecb5586a3797d017606129e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Felix Ruess <felix.ruess@gmail.com> Reviewed-on: http://openocd.zylin.com/212 Tested-by: jenkins
2011-11-07target config files: Fix whitespace issues.Uwe Hermann
Drop useless double-space occurences, drop trailing whitespace, and fix some other minor whitespace-related issues. Change-Id: I6b4c515492e2ee94dc25ef1fe4f51015a4bba8b5 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/137 Tested-by: jenkins
2011-11-02cfg: add Stellaris LM4F232 Evaluation Kit configSpencer Oliver
Change-Id: Ica754897bef6573a0738ed1afdfe1dfda07292fd Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/151 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-11-02tx27stk5: add board init support for KaRo TX27 CPU moduleMark Vels
This patch adds support for a KaRo TX27 CPU module on a StarterkitV base board. The register settings have been extracted from a RedBoot distribution that is distributed along with the hardware by KaRo. This setup has been tested with a JTAGKey. The testing has been focussed on loading a program into memory and start execution. Although the flash seems to be correctly detected, no effort has been put in testing the NAND programming yet. Change-Id: Ib17763f1e3ecacd0eb9b5fdc32f8cba7a5e59be5 Signed-off-by: Mark Vels <mark.vels@team-embedded.nl> Reviewed-on: http://openocd.zylin.com/158 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-30config files: Drop incorrect comments.Uwe Hermann
There are many "force an error till we get a good number" comments in target/board files. This refers to the use-case where a config script sets _CPUTAPID to 0xffffffff (which presumely gets overridden later): if { [info exists CPUTAPID ] } { set _CPUTAPID $CPUTAPID } else { # Force an error until we get a good number. set _CPUTAPID 0xffffffff } However, the same comment was also copy-pasted in many files which do _not_ set _CPUTAPID to 0xffffffff, where the comment doesn't make any sense at all. Drop those comments. Also, add one missing comment, and fix small whitespace and grammar issues. Change-Id: Ic4ba3b5ccba87ed40cea0d6a7d66609fbdfa3c71 Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/136 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2011-10-26Add configuration for ATMEL SAM3N-EK board.Jim Norris
Change-Id: I525f6c346cace4e54f47659c5a7aceb29ee4baf2 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/125 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-25stm3220g_eval.cfg: fix CHIPNAME.Marti Bolivar
The STM3220G-EVAL board has an STM32F207IGH6. ("...H6", not "...T6"). Change-Id: Iaf3dae6830c5c0685a1dcd1588d391434bc51be7 Signed-off-by: Marti Bolivar <mbolivar@leaflabs.com> Reviewed-on: http://openocd.zylin.com/120 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-23add Freescale Kinetis K40 devices and Kwikstik eval boardMathias K
Change-Id: I4817921d09ab915c50f42651bc073690033450fe Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/51 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-10-13Add a board file for the Glyn Tonga2.Uwe Hermann
This is a Toshiba TMPA900CMXBG (ARM9) based SO-DIMM CPU module with 64MB DDR SDRAM, 256MB NAND flash, and on-board Ethernet. The board file provides a tonga2_init function which sets up the PLL/clocks and memory (SDRAM and SRAM), which allows writing a boot-loader into RAM via JTAG. Change-Id: I60522b97997bdf50e1f25aebab910d93a98522fb Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Reviewed-on: http://openocd.zylin.com/19 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-01Verdex: Add support for Gumstix Verdex boards.Ash Charles
Gumstix Verdex is a PXA270-based series of computer-on-modules. This configuration file is based off the voipac.cfg configuration with a different flash memory configuration. This has been tested flyswatter adapter to reflash a Gumstix Verdex XL6P board.
2011-09-09Add definition for the STEVAL-PCC010 board with the STM32F207Uwe Bonnes
2011-08-24Fix redbee config filesJim Paris
Currently the board/redbee-*.cfg files incorrectly include the interface definition. Move the interfaces to interface/, and create a single board/redbee.cfg that is common to both boards. Intended usage is now: openocd -f interface/redbee-econotag.cfg -f board/redbee.cfg
2011-07-28cfg: update scripts to use new stm32 driver namesSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-16Added Olimex STM32 {H,P}107.cfg boardDale Lukas Peterson
2011-06-08Added configuration file for STM3220G-EVAL board.Laurent Charpentier
2011-06-02uptech2410Bear
2011-05-29Board definition for mini6410/tiny6410 (ARM1176)Damjan Marion
The following mini6410/tiny6410 functions are available: init_6410 - initialize clock, timer, DRAM init_6410_flash - initializes NAND flash support install_6410_uboot - copies u-boot image into RAM and runs it
2011-05-29SMDK6410 is not target, move file to boardDamjan Marion
2011-05-05at91rm9200-ek: add low default communication speedJonas Hoerberg
2011-04-09add at91sam9263-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-09add at91sam9261-ek supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13omap4430: add Blaze configAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@ok-labs.com>
2011-03-03at91sam9: factorise cpu supportJean-Christophe PLAGNIOL-VILLARD
all at91sam9 are nearly the same except sram and soc name Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-23add at91rm9200-ek board supportJean-Christophe PLAGNIOL-VILLARD
tested with jlink sam-ice v5 while loading barebox (gdb) load Loading section .text, size 0x2f190 lma 0x21f00000 Loading section .rodata, size 0x931c lma 0x21f2f190 Loading section .data, size 0x29e8 lma 0x21f384ac Loading section .barebox_cmd, size 0x78c lma 0x21f3ae94 Loading section .barebox_initcalls, size 0x80 lma 0x21f3b620 Start address 0x21f00000, load size 243360 Transfer rate: 26 KB/sec, 13520 bytes/write. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-01-31TCL configs for OMAP4430 and PandaboardAaron Carroll
Signed-off-by: Aaron Carroll <aaronc@cse.unsw.edu.au>
2011-01-02actux3.cfg: add function to setup for u-boot debuggingMichael Schwingen
Signed-off-by: Michael Schwingen <michael@schwingen.org>
2010-12-20tcl/board: Clean up STM32 EVAL boards configurationsTormod Volden
Make consistent use of hex memory size for flashing. Delete stm32f10x_128k_eval.cfg. It has no product reference nor any settings in it.
2010-12-20tcl/board: Fix ST URLs in stm32* eval board configuration filesTormod Volden
ST recently rewamped (screwed up) their web site and broke all links. Also match the chip names with those on the web site product descriptions.
2010-12-19update IXP42x target / XBA board configMichael Schwingen
2010-12-18Add support for Hilscher netX controllersMichael Trensch
2010-12-18TCL: fix non TCL commentsAntonio Borneo
End of line comments fixed with ';' before '#'. Added few additional 'space' to keep indentation in multi-line comments. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-10stm32: add STM32E-EVAL external memory config scriptSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 16:26:02 +0000