summaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2015-02-04flash/nor/stm32lx: use 0 base to autodetect second bank locationPaul Fertser
Change-Id: I3c296b3e276fcd4d92e4180fc0d2133eebfcc240 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2503 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04flash/nor/stm32l: unify waiting for busy flag functionsPaul Fertser
Change-Id: I5e6daff8232bb4807dd13a1951fbf335529661d4 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2491 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04flash/nor/stm32l: fix mass erasePaul Fertser
Topaz reports on http://sourceforge.net/p/openocd/tickets/87/ that protection level constants are mixed up. This leads to device ending up in protection level 1 after mass erase. Additional work is required to actually put the device in RDP Level 1 and then back to Level 0, as Option bootloader launch is a special kind of full target reset. To be able to flash properly after mass_erase a "reset init" is needed (it's anyway recommended to always perform it before any flash operation). Change-Id: I9a838909458039bb0114d3019723bf134fa4d7c9 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2490 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04configure: define WIN32_LEAN_AND_MEAN early to make it effectivePaul Fertser
This macro makes windows builds faster and helps with the old "#define interface struct" issue as the word "interface" is part of libusb-0.1 API. However, defining it in replacements.h is too late, as windows.h gets included by that time from somewhere else. This solution is provided by Ray Donnelly from the MSYS2 team. Change-Id: I376a5fb3d106786515d7e1ba44dbd751e4dcdb1b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2486 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04Makefile.am: link libusb-1.0 after libusb-0.1 to fix dependenciesPaul Fertser
Since libusb-0.1 might be provided by libusb-compat, it will depend on libusb-1.0, so needs to be mentioned before it in the link command line, this is relevant for static linking. Thanks go to mingwandroid for spotting it during MSYS2 build. Change-Id: I15cf0b8f084c351b4f93e75686bd0f843477352b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2485 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04flash/nor/stm32f2x: add new revisions of STM32F4x partsPaul Fertser
Change-Id: I7585ccbe12fe079e960ce9e33d9a143672a6a08c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2493 Tested-by: jenkins Reviewed-by: Rémi PRUD'HOMME <prudhomme.remi@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-04Subject: [PATCH] update src/flash/nor/stm32f2x.cRémi PRUD’HOMME
Add the new STM32F446 mcu with 512 Ko Tested with a eval board Change-Id: I0c16ce7d32d249c7634d697815207c20e7f778c4 Signed-off-by: prudhomme.remi@gmail.com Reviewed-on: http://openocd.zylin.com/2484 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-02-02Add more STM32F3 IDs in target/stm32f3.cfg.Uwe Bonnes
Change-Id: I4c4462aa025639c4d20e6fa23c8845a69e60afc5 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2435 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-30drivers/stlink: clarify "init mode failed" messagePaul Fertser
The message as it was didn't let the user know that something was wrong with the target or wiring. Change-Id: Ib609c2d31959e77413e61c348d0e31d7269d5c58 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2365 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-01-30jtag/drivers: remove useless checks causing build failure with clang 3.5.0Paul Fertser
Change-Id: Icafab6ac1e3e79c6da1bc163c30744eee4bde8d3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2482 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de>
2015-01-30armv4_5: Continue the change from uint32_t to uint8_t[4] for regsAndreas Fritiofson
Also remove an unrelated no-op cast. Change-Id: Ibeb6c72e5b0b0347abb568947a05a179661faf2d Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2473 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins
2015-01-30Use (uint8_t *) for buf_(set|get)_u(32|64) instead of (void *)Paul Fertser
This helps to uncover incorrect usage when a pointer to uint32_t is passed to those functions which leads to subtle bugs on BE systems. The reason is that it's normally assumed that any uint32_t variable holds its value in host byte order, but using but_set_u32 on it silently does implicit pointer conversion to (void *) and the assumption ends up broken without any indication. Change-Id: I48ffd190583d8aa32ec1fef8f1cdc0b4184e4546 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2467 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-30stm32f2x: Fix byte order bug.Jens Bauer
Do not use buf_set_u32 on integers; they're not buffers. If using buf_set_u32 on integers, bytes will be exchanged on Big Endian targets. In this particular case, FLASH_OPTCR was incorrectly written, causing it to often contain one of these values: 0x00aaaae1, 0x00aaffef, 0x00ffabe1 or 0x00abffe1. This write-protected the device before flash-programming, causing this command... flash write_image erase unlock myfile.elf ... to fail, complaining about write-protection. Repeating the above command would change the OPTCR register each time. After applying this patch, the OPTCR remains "unchanged". Change-Id: I73d510fcc2e81a01973ad5c6e1aa22715ebd2743 Signed-off-by: Jens Bauer <jens@gpio.dk> Reviewed-on: http://openocd.zylin.com/2466 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-30flash/nor/kinetis: pull SRST low during mass erasePaul Fertser
Mass erase operation might be impacted by different factors, apparently the most reliable way is to do it while asserting the chip reset line. Change-Id: Id6ab57eaec86e402ffdf4f5c8843e7735640f03e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2424 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-28jtag: Rewrite TAP verification/auto-probe logicAndreas Fritiofson
Enable auto-creating additional discovered TAPs even if some TAPs are predefined, avoiding initialization failure when it's not necessary. Also, drop the arbitrary limit on the number of predefined TAPs. Still, don't auto-create any if there are more than 20 TAPs already, to stop a noisy connection from creating unlimited TAPs. Create auto-probed TAPs with less noise. Reduce code duplication between verification and auto-probing. Change-Id: I82a504d92dbcc0060206e71f10c5158256b5f561 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2236 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-28ARMv7-A: remove useless switch constructUwe Kleine-König
The default label does just return the same error code as the case for zero, so this can be handled by a simple if statement. Change-Id: I61a8cb51b5e261f21eca386af7d8cbf17ffa2d44 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-on: http://openocd.zylin.com/2430 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-26jtag/drivers/cmsis-dap-usb: fix cmsis_dap_serialJaakko Kukkohovi
Previously the serial wasn't actually used in hid_open() call, which meant that the first device with matching vid:pid was opened irrespective of the actual serial number. Change-Id: I45216ae5d9e0798e97be693c30e2f03c89b9a02b Signed-off-by: Jaakko Kukkohovi <jkukkohovi@gmail.com> Reviewed-on: http://openocd.zylin.com/2487 Tested-by: jenkins Reviewed-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26jtag/drivers/stlink: demote the output of available speeds to DEBUGPaul Fertser
Change-Id: If0afb6fb1cb2f39619e4e614573065c145255c3e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2469 Reviewed-by: Jens Bauer <jens@gpio.dk> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26jtag/hla_interface: avoid segfault with adapters that do not have ↵Paul Fertser
configurable speed Change-Id: I0386cbfc85ba8b28d3819530f9950b31545d6821 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2468 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26stm32f07/9: Both devices have 256 kByte Flash Maximum.Uwe Bonnes
See RM0091, Rev.7. page 56. Change-Id: I9a98094d49739686f93e26a5112eb0a2a8a7c883 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2458 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26stm32f0x: Remove duplicate code for revision string.Uwe Bonnes
As of RM0091, Rev. 7, all F0 have the same revisioning scheme. Change-Id: I0b344a1d3ca3f61f48fa151e83c549ca5333ae47 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2457 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26stm32f09x: Print info in get_stm32x_info.Uwe Bonnes
Change-Id: I5f9b765fe04906e124e2c95ff6bf7193be9d4ce2 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2456 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-26flash/nor/stm32f1: Add handling of stm32f09, nearly same as stm32f07.Uwe Bonnes
Change-Id: I9cb2aa75decca0e8a065fe7f5353de44d6877274 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2394 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15flash: add AT91SAM4SD16C deviceJörg Wunsch
Change-Id: I12f740a1a2d10637b0e5b1e8d054dd912576d190 Signed-off-by: Jörg Wunsch <openocd@uriah.heep.sax.de> Reviewed-on: http://openocd.zylin.com/2455 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-15stlink: add reconfigurable speed supportSpencer Oliver
The ability to change the speed has been added to firmware versions J22 and above. Any attempt to change on earlier versions will be ignored without error, as the existing code does. For supported firmware versions the driver will attempt to get as close as possible to supported speeds (never higher). The default stlink speed on power up is 1.8MHz. The driver will now also print supported clocl speeds during init. Change-Id: Iee9bd018bb8b6f94672a12538912d41c23d48a7e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2335 Tested-by: jenkins
2015-01-15hla: add ability to change adapter speed (if supported)Spencer Oliver
As a note we need to cache the requested speed setting, as the hla interface may not be ready when the first adapter_khz is called. Change-Id: I2fa6807d5f0bd3f0365cf178bd10a230c39415a7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2334 Tested-by: jenkins
2015-01-15jtag/hla: output possible idcode candidates in case of mismatchPaul Fertser
Output a similar message to what we have on low-level JTAG adapters to avoid confusing users. Reported on IRC by chickensk. Change-Id: I96d58410ef715b966e32d79c0aacf38596c5eb3f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2451 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15jtag: Avoid extra SRSTn resets when connectingEvan Hunter
Previously the jtag_add_reset(1, 0) caused the processor to be released, and if SRSTn existed then it would then be reset again two lines later. Change-Id: I58b7a12607f46f83caa7ed3b3cebc4195eb51ef6 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/2398 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15lpc2000: Improve lpc2000 flash driver.Nemui Trinomius
This patch adds flash programming support for LPC5410x and LPC82x. And adds auto flash size detection for LPC800 series. Tested on below listed boards/chips. LPC54102(LPCLPC54102Xpresso) LPC824(LPCXpresso824-MAX) LPC812(LPC812MAX) LPC811,LPC810 Change-Id: Ie68b6d425b17ccfa83814607ee61056e99800c1c Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2442 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-10cortex_a: Add support for A7 MPCoreAlexander Stein
A7 MPCore needs unlocking the debug registers same as with A15 MPCore. Found out by hacking on the code. Change-Id: I613cb4fb35007b85b4a9a401577b47768bc1a08b Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-on: http://openocd.zylin.com/2344 Tested-by: jenkins Reviewed-by: Kamal Dasu <kamal.dasu@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-10cortex_a: Add support for A15 MPCoreKamal Dasu
Added Cortex-A15 support for DAP AHB-AP init code as per ADI V5 spec. Also added changes to make the APB MEM-AP to work with A15. Made the the cortex_a target code generic to work with A8, A9 and A15 single core or multicore implementation. Added armv7a code for os_border calculation to work for known A8, A9 and A15 platforms based on the ARM DDI 0344H, ARM DDI 0407F, ARM DDI 0406C ARMV7A architecture docs. Change-Id: Ib2803ab62588bf40f1ae4b9192b619af31525a1a Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-on: http://openocd.zylin.com/1601 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-09ChibiOS: struct ChibiOS_params_list[] should not be constTomas Vanek
Procedure ChibiOS_update_memory_signature() sets struct member signature. Change-Id: I45adbd14fa7cda99413fd0b516d45b3fb55e322d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2427 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09transport: clarify error message when transport is not selectedKarl Palsson
When no transport is selected, the error message dumps the available transports, but not how to actually select one. Change-Id: I63da2a4b59e3f6cc8d30bd631e41a82636a056ef Signed-off-by: Karl Palsson <karlp@tweak.net.au> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09flash: fix kinetis driver typosSpencer Oliver
Change-Id: I0a4557f08507c61cb8ab33b38d2b6b069c344c09 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2385 Tested-by: jenkins
2015-01-09avoid segfaulting when attempting to set an unavailable type of breackpointSalvador Arroyo
For example "bp 0x20000000 8 2" makes openocd segfaulting on a stm32f4x Discovery board. Change-Id: I1ddd46b1fa9ade78db2234ed975ccefb72539331 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/2342 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-09Mac/PPC: Fix build.Jens Bauer
GCC-4.2 on Mac/PPC complains about size_t is expected for %zx and the build stops. In order to avoid other problems, I've chosen simply to typecast. Change-Id: I99b569c4d1100e729712e31d24d6539f8b5971b6 Signed-off-by: Jens Bauer <jens@gpio.dk> Reviewed-on: http://openocd.zylin.com/2360 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2015-01-09swd: handle various failure conditionsPaul Fertser
When communication with target fails for whatever reason, it makes sense to do JTAG-to-SWD (in case the target got power-cycled or the DAP method was reset anyhow), SWD line reset sequence (part of JTAG-to-SWD already) and the mandatory IDCODE read. Schedule that to be performed on the next poll. Fix the return values for ftdi and jlink drivers to be consistent with OpenOCD error codes and remove ad-hoc calls to perform DAP method switching (as it's now done from the upper layer automatically). Change-Id: Ie18797d4ce7ac43d8249f8f81f1064a2424e02be Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2371 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mateusz Manowiecki <segmentation@fault.pl>
2015-01-09target: improve robustness of polling and reexaminationPaul Fertser
When a target was present on OpenOCD start but later disappeared for whatever reason (typically unstable connection or target going to sleep) and reappeared only for a brief period of time, reexamination would fail, and poll would no longer run. This patch fixes it. Change-Id: I61f9b5a3f366a761320e233f4e1689f926b5556d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2370 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2015-01-09rtos: free gdb packet allocated memorySpencer Oliver
compile tested only. Change-Id: I3bc06c212967a3ce44a875f802b554c178537d1d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2382 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-01-07jtag: Remove unnecessary global variableAndreas Fritiofson
Change-Id: I96e5f13b12da2970eafc5fca24b7952d427eeca9 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2235 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-07jtag: Fix memory leaks in jtag_tap_free()Andreas Fritiofson
Change-Id: I953fbb346fbf168fb50b349d245f2aa64dbfdcb3 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2234 Tested-by: jenkins
2014-11-24lpc2000: ignore status of part ID IAP commandGrigori Goronzy
The IAP firmware won't return a proper status with some versions. This happens on my CCC r0ket board and others have seen it as well [1]. So just ignore the status code and do a (weak) consistency check instead. [1] http://www.lpcware.com/content/forum/lpc1343-iap-read-part-identification-command Change-Id: I0daa779d520a540629677c56857bbc20d6db422d Signed-off-by: Grigori Goronzy <greg@chown.ath.cx> Reviewed-on: http://openocd.zylin.com/2364 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-11-24or1k: remove address of the Free Software FoundationAntony Pavlov
The FSF address has changed; The FSF site says that address is Free Software Foundation 51 Franklin Street, Fifth Floor Boston, MA 02110-1301 USA (see http://www.fsf.org/about/contact/) Instead of updating it each time the address changes, just drop it completely treewide. Change-Id: I27199f7625901f677d8105d1e8876cff00147b71 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2340 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24mips32: fix typosAntony Pavlov
Change-Id: Ibb98fe3da68bf670a5bb83600bb49647db8a4163 Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Reviewed-on: http://openocd.zylin.com/2338 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24Added FPU support for ChibiOS/RTChristian Gudrian
When an enabled FPU is detected we now use an appropriate stacking. Change-Id: I1b0f43ec22e1c55c4f10e2ffa97d4aaa77bca5ee Signed-off-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on: http://openocd.zylin.com/2354 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24rtos: add support for ChibiOS/RT 3.0Christian Gudrian
In ChibiOS/RT 3.0 the ready list pointer "rlist" is now part of the system data structure. Since the ready list is the first element in that structure it can be accessed via the structure's symbol "ch". Change-Id: Idc7eaa87cb7bbad0afa0ff1dafd54283bf429766 Signed-off-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-on: http://openocd.zylin.com/2352 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24rtos: allow symbols to be optional for a particular RTOSPaul Fertser
Default to non-optional. Change-Id: Ifc9ddb1ab701a19c3760f95da47da6f7d412ff2e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2355 Tested-by: jenkins Reviewed-by: Christian Gudrian <christian.gudrian@gmx.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24flash: at91samd: fix use of is_erased in checkAndrey Yurovsky
is_erased can be one of -1, 0, or 1 so it must not be checked like a boolean value. In this case we want to erase a page unless we know it's already erased so we just check for is_erased != 1. Thanks to Jim Paris for pointing this out on another driver. Change-Id: I4591186228153b64e5a9608a2aac18745e578d4a Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2368 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-11-24jtag/drivers/jlink: implement register command to fix SWDPaul Fertser
Some J-Link fw versions require registration to be performed before SWD operation is possible. It doesn't harm anyway, vendor's utilities do it unconditionally. Thanks go to Segger for providing the necessary information. Change-Id: Iabd76c743eca86e2c817a97cb93c969fec3f7ac6 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2331 Tested-by: jenkins
2014-11-24at91sam4: Adding support for the AT91SAM4S4A.Thomas Schmid
Added the chip definition for the Atmel AT91SAM4S4A. This chip is a 48-pin package with 256k flash and 64k ram. Change-Id: I8ada7d5735e31e0ce086f96f5906c7358464245c Signed-off-by: Thomas Schmid <thomas@rfranging.com> Reviewed-on: http://openocd.zylin.com/2254 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2025-09-19 04:27:30 +0000