aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-11-05cortex_m: fix define formattingSpencer Oliver
Change-Id: Ibdec882b2afc7e16f2361f86715463e030a54964 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/963 Tested-by: jenkins
2012-11-05rtos: Make ChibiOS code aware of endinessMatthias Blaicher
The ChibiOS code was derived from other RTOS support code which does not honor the target vs. host endiness. The other RTOS code still needs to be fixed. Change-Id: Idf42cfaa30945289bf1756ad6491fff84913eda9 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/962 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-05rtos: Add FPU detection to ChibiOS/RTMatthias Blaicher
The stacking of ChibiOS/RT depends on the usage of an FPU. If the FPU is enabled the FPU registers are also saved on context switch. This patch adds automatic detection of FPU for armv7m targets. Note: With this patch, openocd will only output an error message warning that the FPU is enabled. For further FPU support, the correct stacking information also needs to be added. Change-Id: I0984cbd9180f247ba2fa610e74a6413cc54239ea Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/961 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-11-05rtos: Fix wrong ReadyList lookup in ChibiOSMatthias Blaicher
We already have the address of the ReadyList provided by gdb. It is wrong to resolve that address a second time and it only works by accident. Change-Id: I82fa2360931c416290cd7f83e1883f86f90dedc2 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/959 Reviewed-by: Joel Bodenmann <joel@unormal.org> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-31fix memory leaksSergey Borshch
if add_connection() fails, memory allocated in copy_command_context() is lost. Signed-off-by: Sergey Borshch <sb-sf@users.sourceforge.net> Change-Id: I91a2757f29612038031eb8953100faa3b850d3a6 Reviewed-on: http://openocd.zylin.com/836 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-31Ensure Cortex-M reset wakes device from sleep (wfi/wfe)Evan Hunter
Change-Id: Idb52ca3123bb3e2f7863ba1b82ac9b176d7cb094 Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/833 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-30mpsse: Always perform a general reset of the MPSSE in mpsse_open()Peter Stuge
Per AN_135 FTDI MPSSE Basics Version 1.1, section 4.2 step 7. http://www.ftdichip.com/Support/Documents/AppNotes/AN_135_MPSSE_Basics.pdf This allows to stop and restart OpenOCD reliably, without needing to power cycle the interface. Change-Id: Ibeafe5ecfe7b2f6f82712cbc85116904407ddb36 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/939 Tested-by: jenkins
2012-10-28flash: update stm32 flash driver versionsSpencer Oliver
Seems ST have changed the ref manual (RM0313 rev1) and reverted to using letters rather than numbers for the stm32f3x family. Change-Id: I3a87ec9b0b2447d57dfef98603d30e28fe9ac927 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/926 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-28gdb: fix broken qCRC packet handlingSpencer Oliver
The rtos layer was incorrectly handling a qCRC packet as a qC packet. Make sure we check for the qCRC packet and return unhandled so the gdb server gets a chance to handle it. This packet is used in the gdb compare-sections cmd. Change-Id: I21f8e5fa7225fccd13d65cf9e40186895065a7e3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/933 Tested-by: jenkins Reviewed-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-28gdb: use strncmp rather than strstrSpencer Oliver
All the packets received will be at start of the packet buffer, so use more efficient strncmp. Change-Id: Ib9c45d8f53425367006b1f880c1bde27f03a6cf9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/932 Tested-by: jenkins Reviewed-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-28ioutil: make the file compile on MacOSEdgar Grimberg
The meminfo command cannot exist if the malloc.h header is not present. Cannot get the mac address without sys/ioctl.h and SIOCGIFHWADDR defined Change-Id: Ifc0fb98c3a60c53ad2e19473e08b34c460529d0b Signed-off-by: Edgar Grimberg <edgar.grimberg@gmail.com> Reviewed-on: http://openocd.zylin.com/912 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-28adi_v5_jtag.c: Avoid infinite recursion in jtagdp_transaction_endcheck()Andreas Fritiofson
Change-Id: I81163d9c2ff97ed768f8a3ac1505a8d2b5016b91 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/908 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-10-28rtos: fix gdb qC command answerMatthias Blaicher
rtos->current_thread is of type int64_t. All other commands already respect this. Change-Id: I9951946ff2a09c53cd78c6ab882c80cdd2ab7ac6 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/917 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-28rtos: Use ARRAY_SIZE instead of coding it by handMatthias Blaicher
Use ARRAY_SIZE in helper/types.h to determine the size of the symbol list. Change-Id: Icc9838323510f8602efa5d0162a4daed33f863b9 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/935 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-27rtos: Fix wrong allocation in linux_get_symbol_list_to_lookupMatthias Blaicher
linux_get_symbol_list_to_lookup allocates to few memory. On 64 bit systems the error did not show due to char* being twice its size, leaving accidentally enough space. This patch makes linux_get_symbol_list_to_lookup behave identical to all other RTOS. Change-Id: I290ea241fb20b65585c8be14609a92fdbd2a307d Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/934 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-24Revert "gdb_server : 'R' command replied by OK"Spencer Oliver
This reverts commit 1e7e59445287c3389b52903a7cacdb5635248f32. For some reason the above commit added a reply to the restart command - this is not required as per the gdb docs. Newer versions of gdb (7.0 and above) will complain about this reply. Change-Id: Ieeae3dcf44d798a91dfc6f7348da982c2ce1be31 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/910 Tested-by: jenkins Reviewed-by: Joel Bodenmann <joel@unormal.org>
2012-10-18stlink: fix vector catch not being clearedSpencer Oliver
Seems after a reset the stlink is not clearing the vector catch (VC_CORERESET) in the Debug Control Register. This has the side effect if the user presses an external reset the core will halt, this patch fixes that. Change-Id: Ic3b2c3991b79cacbbd901c02b79613c2e204e71f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/905 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-17gdb: fix extended-remote restartSpencer Oliver
Seems versions of gdb > 6.8 require an W stop reply after receiving a kill packet. Without this we receive the following error from gdb: gdb/thread.c:72: internal-error: inferior_thread: Assertion `tp' failed. Change-Id: I86765a321f0429c9b517fe13ded0ee2dbd4b2f87 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/911 Tested-by: jenkins Reviewed-by: Joel Bodenmann <joel@unormal.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-17flash: fix at91sam3/4 driver typosSpencer Oliver
Change-Id: I06efdfcc48279b06035e9e173945304310054864 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/896 Tested-by: jenkins Reviewed-by: Olivier Schonken <olivier.schonken@gmail.com>
2012-10-17Fix serious bug in LPC2xxx/LPC17xx flash algorithm.Freddie Chopin
Flash algorithm for LPC17xx/LPC2xxx was trying to "reuse" previously allocated working area on next flashing which is not possible - working areas are freed automatically on reset. This caused all but first flashing attempts to fail. As there is no point in storing pointer to working area, it was converted to local variable. Change-Id: I939946325ff9eecc4861c0f51ab0f73871a3d7b9 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/860 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-17Cleanup lpc2000.cFreddie Chopin
Do some cleanup in lpc2000.c - concatenate short lines into single longer lines, move variable declarations to "just before" they are used, etc. Change-Id: Ia7b9f0307dd4857ee8e15c8a6d4d7b5c4392fd80 Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/861 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-16rtos: Add ChibiOS/RT supportMatthias Blaicher
This patch adds ChibiOS/RT support. This patch requires at least ChibiOS/RT development version starting from SVN revision 4734. Note, that the Thread structures depend not only on the target but also on the ChibiOS configuration at build time. To correct this ChibiOS includes a new "memory signature" which specifies the offsets. Special thanks go to Peter Stuge and Spencer Oliver for their continous input and feedback to this patch. Change-Id: I842bf7ba6c2309a4efe93d29ea6cd0784a8b22a3 Signed-off-by: Matthias Blaicher <matthias@blaicher.com> Reviewed-on: http://openocd.zylin.com/901 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-12cfi: remove typos and code cleanupSpencer Oliver
No change to code, just fix some formatting issues. Change-Id: I177430a99bfecbf90a1ddf623321c29d4db516b0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/906 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-12flash: update stellaris flash data to latest dev package 9453Spencer Oliver
Change-Id: I16107a093d4ed7342583f5c32ad16aa98f81d122 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/856 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-09rtos: Don't crash on qSymbol GDB packet when no RTOS is configuredMatthias Blaicher
Commit 43902905bbc8fdc9d764f3843d697161d9b5fd92 fixed a bug but also introduced a regression. The RTOS GDB packet handler is always called, not only when an RTOS is actually configured, so it is important to check if an RTOS has been configured or not before actually processing the qSymbol packet. Change-Id: I1aed54f6c2817e1ebf99ddcda051df4554ea5a3a Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/907 Tested-by: jenkins
2012-10-08rtos: support FreeRTOS over stlinkPaul Fertser
Since stlink is a special case it presents the same CPU core under a different name, so copy the configuration to account for that. Change-Id: I9febf79b388301bde6211d185b5b8161cdadb9ff Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/652 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-08rlink: Fix DTC command timeoutPeter Horn
With the current timeout setting i = 10 in drtc_run_timeout() I get "Error: too many retries waiting for DTC status" when loading a program into the FLASH of an STM32F1. By experimentation a value of i = 22 was found to be the minimum on my system. Therefore the value has been increased to i = 50. Change-Id: Ib67fc648ccaad305871b81c2c39e49de53c330a0 Signed-off-by: Peter Horn <peter.horn@bluewin.ch> Reviewed-on: http://openocd.zylin.com/863 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-08dsp5680xx_flash: Remove unused flash bank structureAndreas Fritiofson
Change-Id: I947b6730b3741a71303e440daefa4fcf583cb9cf Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/867 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-08stm32f1x: Increase options erase timeoutAndreas Fritiofson
The erase time for the option byte page is not directly specified but is assumed to be the same as the other pages (or mass erase) which is 20 to 40 ms. The current timeout value is 10 which means 10 ms plus the time to poll the status flag that many times. With faster interfaces or drivers (such as when using the ftdi driver instead of the ft2232 driver) the adapter delay is not enough in some cases, unless the jtag freq is reduced as a workaround. The result is a "timed out waiting for flash" error when trying to write the options. Increase the timeout to a minimum of 100 ms, which is in line with the other erase timeouts. Also make defines of both the erase and the program timeouts. Change-Id: Ia86e71505033c52b60ef30092000689fbb547a18 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/902 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-08flash/nor/stellaris: Remove unnecessary write_algorithm checkAndreas Fritiofson
The pointer must be non-null here since we returned if allocation failed. Change-Id: I9b75099ed3b3870c815d1df5760ed1f3fe1d20d6 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/866 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-08flash/nor: make all working area pointers localAndreas Fritiofson
Working area pointers shouldn't be re-used, so there's no point in storing them in the flash bank struct. Make all such pointers local. Change-Id: Iab65b4e8b475fed7fc72fb8928f54590fa69d260 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/865 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-07Revert "target: remove unused working area 'user' field"Spencer Oliver
This reverts commit 63a23e6fc862b94f00e0833ab474bd02901a019f Change-Id: I62778fb3b1dabc6470d582bea9ca64d593999233 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Change-Id: Iaf5a2cf5bdc4a62ba68ad9403e1c1229112970de Reviewed-on: http://openocd.zylin.com/899 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-05rtos: Rewrite rtos_qsymbol() and fix auto-detect false positivePeter Stuge
Matthias Blaicher submitted a patch at http://openocd.zylin.com/#/c/891/ to fix the false positive; when no RTOS was detected OpenOCD used the last RTOS in the list. While reviewing the code affected by Matthias' patch a rewrite seemed appropriate, to make the code readable. Matthias has abandoned his change and this change also fixes the false positive. Change-Id: Ic3327ccd036da52ba0a7e21ef93018205e74149c Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/895 Reviewed-by: Matthias Blaicher <matthias@blaicher.com> Tested-by: jenkins
2012-10-05rtos: Rewrite rtos_try_next() for readabilityPeter Stuge
The new code is almost functionally equivalent to the old. The function now returns 0 instead of -1 if target->rtos has not yet been allocated. All call sites only test for success, and in practise that is also the only thing that matters; if the function successfully iterated to the next RTOS or not. Other than that the only difference is that the code is now readable. Many thanks to Matthias Blaicher for the fix to the iteration error! Change-Id: I3342826f653b5e46c99ad1f58eec26ff10795c33 Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/894 Reviewed-by: Matthias Blaicher <matthias@blaicher.com> Tested-by: jenkins
2012-10-05rtos: Rewrite rtos_create() for readabilityPeter Stuge
The new code is almost functionally equivalent to the old; besides error handling the only difference is that the code is now readable. Many thanks to Matthias Blaicher for pointing out an iteration error in the rtos_try_next() change, which also affected this change. Change-Id: If38b87439e9de2303b220b3a7e3200ceaa8391da Signed-off-by: Peter Stuge <peter@stuge.se> Reviewed-on: http://openocd.zylin.com/893 Tested-by: jenkins Reviewed-by: Matthias Blaicher <matthias@blaicher.com>
2012-10-04Modified Sector Erase for AT91SAM4SOlivier Schonken
In FLASHD_ErasePages AT91C_EFC_FCMD_EPA is used to erase sectors. According to the datasheet FARG[15:2] defines the page from which the erase will start.This page must be modulo 4, 8, 16 or 32 according to the number of pages to erase. FARG[1:0] defines the number of pages to be erased. Previously (firstpage << 2) was used to conform to this, seems it should not be shifted... Changed it to (firstPage) | erasePages. Change-Id: I791cc7fc4faf056623ad5a6c7e860315306098a1 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/830 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-10-04build: fix broken ftd2xx bus blasterSpencer Oliver
If configure is executed without --enable-ft2232_ftd2xx then the bus blaster or presto will fail to build with unresolved external ftd2xx_status_string. Make sure we run the ftd2xx build test if --enable-usb_blaster_ftd2xx is enabled. Change-Id: I09d270d6fcd083d77f6785b8969d9acb3dfef11d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/892 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-02gdbserver: code cleanupSpencer Oliver
Change-Id: Iab2966be8dd145f33f41902e2d55afe03d0f5856 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/857 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02build: remove unnecessary jim.h includeSpencer Oliver
as well as not being required, as it is already included by jim-nvp.h. It also makes the doxygen output a bit clearer to read. Change-Id: Ia2bed7142b4a56b48b1ecf0734e63f860dcd1014 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/859 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02sysfsgpio: remove ignoring return value build warningSpencer Oliver
fixes following gcc warning: error: ignoring return value of write, declared with attribute warn_unused_result Change-Id: I96ea6649078449208a77690caea2cb237c388e6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/854 Tested-by: jenkins Reviewed-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02flash: add stm32f3 rev 2 flash supportSpencer Oliver
Change-Id: Ibab5112f5f70a609136d01ebc50530a334640d03 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/809 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02ftdi: incorrectly using output register for directionSpencer Oliver
fix a simple copy/paste bug. Change-Id: I5caaa4d16d30f26a453bd6a00c95261fd6e716c5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/849 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-10-02ftdi: correct ftdi_initialize error textSpencer Oliver
Change-Id: If230c0b5b3a18fd273106b743404079d0cbc9ddc Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/840 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-10-02ftdi: fix adapter_init rclk fallbackSpencer Oliver
adapter_init expects jtag_get_speed (via ftdi_khz) to return a valid fallback speed if the adapter does not support rclk. The call was failing and so was the rest of the adapter init. The makes the new ftdi driver emulate the old ftdi driver. Change-Id: Ic7fac7d201241eb181e98f1ba7111f159731f6e0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/839 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-29Fix: Error while reading from USB endpointPeter Horn
This patch fixes the bug reported here: http://sourceforge.net/mailarchive/message.php?msg_id=28350157 When using Rlink under Linux, openocd exits with: "Error: Read of endpoint 2 returned -75, expected 17" The return value of -75 translates into EOVERFLOW. The cause is a wrong output buffer size argument passed to dtc_run_download(). Change-Id: I5d056705181ab6a6d4355524df06a0ea9c605961 Signed-off-by: Peter Horn <peter.horn@bluewin.ch> Reviewed-on: http://openocd.zylin.com/862 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-09-27jtag: remove libftdi enum-compare warningSpencer Oliver
See Trac #52 for details. Change-Id: Idb509ead2b51bfcceeb00d0224a4d1c395b28a04 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/801 Tested-by: jenkins Reviewed-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-27Add extra Coresight component ROM identifiers for the Cortex-M4Evan Hunter
Signed-off-by: Evan Hunter <ehunter@broadcom.com> Change-Id: Iaf2d69cf10c341d3a516986677f69a4389b29b1a Reviewed-on: http://openocd.zylin.com/841 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-09-26Added SPIFI flash driver, algorithms, and docsGeorge Harris
Added a flash driver designed to allow program/erase of memory-mapped SPI flash chips for LPC43xx/LPC18xx family micros. This driver includes three algorithms - erase, write, and SPIFI peripheral initialization (to allow memory-mapped access after a reset). The driver has been added to the flash driver table (drivers.c), and the OpenOCD documentation has been updated to include the flash driver configuration command. Change-Id: I79f4ff8f1f07de4e5f2fe4f8c23aeb903f868514 Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/783 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26SPI nor drivers refactorGeorge Harris
Moved common SPI flash driver code (device table, common commands) into flash/nor/spi.c and spi.h. Updated flash/nor/stmsmi.c to reflect this refactor. Change-Id: I141644b0af71d3835f29f06dd15b505a00e5b6ec Signed-off-by: George Harris <george@luminairecoffee.com> Reviewed-on: http://openocd.zylin.com/782 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-09-26drivers: new jtag bitbang driver using sysfs gpioMarc Reilly
This driver implements a bitbang jtag interface using gpio lines exported via sysfs. The aim of this driver implementation is to use system GPIOs but to avoid the need for an additional kernel driver. A config suitable for RaspberryPi is included. Change-Id: Ib2acf720247a219768d1cbfeebd88057ed2d7b8b Signed-off-by: Marc Reilly <marc@cpdesign.com.au> Reviewed-on: http://openocd.zylin.com/762 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-20 08:52:54 +0000