aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2012-04-18zy1000: fixed link to Zylin ZY1000 JTAG ProbeBill Traynor
This patch fixes the link to the Zylin ZY1000 JTAG Probe webpage. The ZY1000 product line was acquired by Ultimate Solutions, Inc. in May 2011. Change-Id: If68cd45a0c47aa20b2e4bb62939b2c505c8c8c2e Signed-off-by: Bill Traynor <wmat@alphatroop.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/571 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-13stlink: correctly format printed hex addressesSpencer Oliver
Change-Id: I4a139989927249bb5e9dcc4804965c85c37cc09b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/559 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-04-13STM32L: Write partial-page flash data after full-page dataMathias K
The target address for the partial data needs to be bumped past the full page data. Otherwise, the partial data overwrites the start of the flash block. Change-Id: I1246b2fa8acbdb8193edcf7029309f11d1c6069c Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/555 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-04-10ft2232: Support for Digilent HS1 USB adapterStephane Bonnet
* Added support to the FT2232 driver for the FT2232H-based Digilent HS1 adapter. Change-Id: Iab6cc15f299badaf115615b5d4d785ecb2273c27 Signed-off-by: Stephane Bonnet <bonnetst@hds.utc.fr> Reviewed-on: http://openocd.zylin.com/558 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10topic: add reset functions for SWDSimon Qian
Add swd_init_reset and swd_add_reset. Add adapter_assert_reset and adapter_deassert_reset, and call them instead of JTAG reset functions. Change-Id: Ib2551c6fbb45513e0ae0dc331cfe3ee3f922298a Signed-off-by: Simon Qian <simonqian.openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/526 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-10doxygen: remove warningsSpencer Oliver
Change-Id: I020845a8df7b67f3b6c1a233b3ee07a5d14fa685 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/556 Tested-by: jenkins
2012-04-10Finish off functions mips32_pracc_read_mem16() and mips32_pracc_read_mem8()Salvador
This functions are unfinished and work only with parameter count up to 1024. Commands mdh and mdb from pic32mx context show values not related to memory content if parameter count is bigger than 1024. Firt 1024 are ok. Change-Id: Ie3f4d4a0f9d1d1a69bd3a18de2f72dd9249514cb Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/550 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2012-04-10Minor bug fixes in Mips32 codeSalvador
Now the the "Fast" version for memory blank check in pic32mx.c can be called: default_flash_blank_check() instead of the "fallback" default_flash_mem_blank_check(). The command "verify_image", without working area, now don't show: checksum mismatch - attempting binary compare when there are no real errors in flash. Change-Id: I256e8ae949289634e1de5c1c2861e4c4c4b7fdce Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/549 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-31Add value "openbsd" for ocd_HOSTOS.Wim Lewis
Change-Id: I9b0dd87d85c0792730f507176001d39c44da7117 Signed-off-by: Wim Lewis <wiml@hhhh.org> Reviewed-on: http://openocd.zylin.com/547 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-30armv7m: fix broken stlink buildSpencer Oliver
The stlink partially supports the cortex-m4 fp regs and requires these defines to build. Change-Id: Id3aa802ecc7006cb6d9f84b79ab3c21af24c1001 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/545 Tested-by: jenkins
2012-03-30stm32: Update register read/write to the register definition.Mathias K
This patch fix the register index on read/write register. Change-Id: I7b52a927a48259d6f497ac0f474aff7ff1529e9a Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/525 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30armv7m: detect floating point featureMathias K
This patch add fp feature detection on cortex-m4. Change-Id: I99e9d1bf5534630a22b8ad9c878165683db2d0ba Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/524 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30topic: Flash support for Pic32mx1xx/2xxSalvador Arroyo
Change-Id: I496cb745fb1eb5c9159471838013b8d19418f5c0 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/500 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30transport: remove interface multiple transport warningSpencer Oliver
Currently if we have multiple transport's defined we receive an warning similar to: must select a transport. allow transport 'jtag' allow transport 'swd This removes that warning and only prints this info if transport_init fails. Change-Id: I87126390f234bc2f705e1f150a0dcc110dcab151 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/532 Tested-by: jenkins
2012-03-30Bug in src/target/mips32_pracc.cSalvador
The bug shows up with the command "mdw addres count" and only if count>1024 (count>0x400). The first 1024 values shows as expected, but the rest of the values are wrong. Name of variable bytesread" is changed to "wordsread" to reflect what really does. Change-Id: Iad79393e72da2637551c5ae6e829e3873605c520 Signed-off-by: Salvador <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/527 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19Add warn message if no flash bank found for the current image address.Mathias K
Add a warn message to inform the user that something is wrong with the flash settings or command parameters. Change-Id: Ia55868b2abf2a17845e51620b0f29b2809d841c2 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/280 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19gdb_server: Simple close the connection and not exit openocd.Mathias K
This patch let openocd running and only close the gdb connection on error. Change-Id: Ifb88e16834b51207cc4c82210eab904ed8d30b71 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/523 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19gdb_server: Fix wrong index/length compare.Mathias K
This patch fix the compare for the list size and the register index. Change-Id: I36d5e078f57d2a9f7823cfdf0d537762e00f6929 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/516 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19rtos: add sanity checking for FreeRTOS's quantity of prioritiesPaul Fertser
On operating systems with opportunistic malloc() (e.g. default setting in GNU/Linux) malloc can sometimes allocate a huge memory region but later the process will get killed on the first attempt to use this memory, so checking for malloc's return value is not enough to prevent a crash. This patch is compile-tested only. Change-Id: I5e21663115c8e9a0ca9f3d71f7ba4bd09e5c3bb1 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/521 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19rtos: fix segfault in FreeRTOS handlingPaul Fertser
When gdb loads an elf file of a newer or older version of the firmware being debugged, or when the firmware is not running yet, there's a high probability of FreeRTOS variables to be read incorrectly, thus leading to an attempt to allocate an enourmous amount of memory. Without this check OpenOCD simply crashes and that's mad confusing. Change-Id: I404a072e886d2d47d9d942cfaea8417eb8bd4a5d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/520 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14stlink: fix alignment build warningAlexandre Pereira da Silva
The {read,write}_mem32 interface functions was asking a 32 bits buffer but they don't need 32 bits alignment. This will change the interface to a 8 bits buffer to remove the alignment mismatch warning. This was causing build errors on platforms with strict aliasing rules. Change-Id: I338be8df5686f07a64ddb4f17c1bb494af583999 Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-on: http://openocd.zylin.com/483 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14gdb_server: sanity check the gdb register sizeMathias K
This patch checks the received register length with the local configured register length and disconnect on a length missmatch. Change-Id: I6b112c6b55a9ffb4526f582a384ffa91dc8b792f Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/517 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14armv7m: Add a dummy register at the end of the register list.Mathias K
Signed-off-by: Mathias K <kesmtp@freenet.de> Change-Id: I0bfad091bd8adabd949fc0a74ef3a08a514eb307 Reviewed-on: http://openocd.zylin.com/519 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-03-14stm32: Add floating point register read/write.Mathias K
This patch add floating point register read/write functionality through the SCS debug interface. Change-Id: Id20e109dd7cccba00671d55ca8aabeb4936cceb9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/512 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14stm32: determine all cpu types and use common examineMathias K
This patch determine all cpu types and not only the cortex M3 and the stm32 target use the common target examine function from the cortex_m sources. Change-Id: If689dd994b3855284b927fc4b206f420cf32b6c7 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/511 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14flash: Fix flash write algorithm on pflash only devices.Mathias K
This patch fix the slow flash write issue on pflash only devices. The Family Reference Manual says: For devices with FlexNVM: FlexRAM For devices with program flash only: Programming acceleration RAM So the acceleration RAM is available for the flash section command on this device. Change-Id: If6541a23a4457c5ed8858848a145f35cac63138b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/509 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14Automatically prepend v1 mass storage protocol.Mathias K
This patch prepend the v1 mass storage protocol to the command buffer and simplify the usb read/write handling. Change-Id: I709602600e93cd1eb5848fa9f4d15659ba85eb35 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/506 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14mips: Forced to running state to enable (subsequent) target halt.Drasko DRASKOVIC
Change-Id: I9aff8fb3ac703b50194088dd4e68cec8f9bb2ada Signed-off-by: Drasko DRASKOVIC <drasko.draskovic@gmail.com> Reviewed-on: http://openocd.zylin.com/513 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13ecosboard: delete bit-rotted eCos codeØyvind Harboe
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2012-03-13jtag: basic support for P&E Micro OSBDM (aka OSJTAG) adapterJan Dakinevich
This driver provides support for the P&E Micro OSBDM adapter (sometimes named as OSJTAG), mounted on the Freescale TWRK60N512 bord. Thus, it provides a quick start when working with this board. The driver doesn't use BDM commands, but work with OSBDM adapter using only JTAG commands. Change-Id: Ibc3779538e666e07651d3136431e5d44344f3b07 Signed-off-by: Jan Dakinevich <jan.dakinevich@gmail.com> Reviewed-on: http://openocd.zylin.com/492 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13topic: Added support for the SAM3X/A variantsOlivier Schonken
Atmel introduced 7 new Cortex-M3 processors on 2012-02-28 SAM3X4C - 256KB flash SAM3X4E - 256KB flash SAM3X8C - 512KB flash SAM3X8E - 512KB flash SAM3X8H (Only on dev-kit - not in production...) - 512KB flash SAM3A4C - 256KB flash SAM3A8C - 256KB flash The SAM3X/A processors still suffer from the "6 waitstates needed to program device" errata. The CIDR address for the SAM3X/A processors are different from the other SAM3 processors. Unfortunately, the chip identification register is not at a constant address across all of the SAM3 series'. As a consequence, a simple heuristic is used to find where it's at... If the contents at the first address is zero, then we know that the second address is where the chip id register is. We can deduce this because for those SAM's that have the chip id @ 0x400e0940, the first address, 0x400e0740, is located in the memory map of the Power Management Controller (PMC). Furthermore, the address is not used by the PMC. So when read, the memory controller returns zero. Another interesting change is the flash bank address for flash bank 1. It is not fixed at 0x00100000 like the Sam3U. Bank 1 of the at91sam3a/x series starts at 0x00080000 + half the total flash size. Thus for the 256KB devices Bank 1 is located at 0x000A0000, and for the 512KB devices Bank 1 is located at 0x000C0000. The configuration files for the SAM3X/A processors will follow Change-Id: I6c3a707c00e05d993a2ad1d5a423f23b37ffd553 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/505 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13target: remove unused declarationSpencer Oliver
arm7_9_prepare_reset_halt is long since gone and the functionality is implemented in the target's assert_reset handler. Change-Id: Ib03c730cb39d68e5e3bb42f92af13daf8074e4e2 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/515 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-11flash: retire unused eCos flash driverØyvind Harboe
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-11target_request: fix warning, do not set local variable to value it already hasØyvind Harboe
Change-Id: If29b0efdc326ee1ce4c07ec9d8777744d674f367 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/490 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06flash: stm32f1x: add a couple missing stm32x_get_flash_regSzymon Modzelewski
Change-Id: I163de2c1bd962e7ea9ca6c741c1c62224c210677 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/486 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06flash: Additional check for NULL in str9xpec enable_turboFredrik Hederstierna
Change-Id: Ifde8783b27c64e4a4bbea180cfa2c86f6a9fe49a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/496 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06stlink: fix incorrect pc console outputSpencer Oliver
target_call_event_callbacks needs to be called after debug entry otherwise we will get a console pc mismatch. Change-Id: I278137736d5e85ca9662c306f6ac81336d8eb6cf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/499 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06SAM3: Remove unused reference to SUPC registersAttila Kinali
The SUPC (Supply Controller) registers are on different base addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N: 0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const, but would need to be changed at runtime to account for this variability. As this register is not used anywhere, it's simplest to just remove it. Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Add missing architecture names for SAM3S and SAM3NAttila Kinali
Change-Id: Ie2177487d4315219eb364db360cb7f88d2720783 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3S: correct flash sector sizes.Attila Kinali
Lock region count and sector sizes did not match datasheet. (see 6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I24ef9f2dda284e041dc4a532b59968a77eebe702 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/498 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: code cleanupSzymon Modzelewski
This patch moves the bulk of the stlink read/write code into the stlink_usb_xfer set of functions and implements stlink_usb_recv in terms of the generic stlink_usb_xfer stlink_usb_xfer will be needed to implement stlink_usb_send without code duplication stlink_usb_xfer: -sends the stlink command -performs a read or write (as requested) -checks the status (v1 only) Change-Id: I0137d52620bd4883d46c9977a9e73f67622000a1 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/477 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Fix assert to check flash programming offsetAttila Kinali
The assert introduced in 00c864835149a96b431fc8f31dd89542d88fd383 checks whether the programming offset equals to page_size of the flash, while it wants to check whether the offset is a multiple of the page_size. Change-Id: I794d021951a28c1cc520b5eea5d500f097721b06 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/482 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-02-29flash: add stm32lx High Density DevicesSpencer Oliver
Change-Id: Ieed9de4b078e1ebf659054a758b4f69acdf5b83e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/466 Tested-by: jenkins
2012-02-29flash: change stm32lx driver probe behaviourSpencer Oliver
Currently stm32lx flash driver will remove the readout protection if set during a probe. This may not be what the user wants, so let them decide. Change-Id: I8575e3b339b10a4f7bac57cca9586dcab513d347 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/465 Tested-by: jenkins
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I52ff9ee8f5d9ae0d47356477468eb98952205c99 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/478 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-27flash: add new devices to pic32mx flash driverSpencer Oliver
update as per DS61145 rev J Change-Id: I2b5da84248ff2f44c7ca9d2ed1c52db453714c05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/461 Tested-by: jenkins
2012-02-26jtag: use correct tap -ignore-version maskSpencer Oliver
when -ignore-version is used we should mask of the upper 4bits not 8bits. Change-Id: I9ffe24c2aeeb414677357a647609fdf018890194 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/473 Tested-by: jenkins
2012-02-26jtag: fix cmd scan_chain expected_ids bugSpencer Oliver
This fixes scan_chain to correctly print all the expected_ids. Change-Id: I93738980d85e0fe369d40c58b19339424d37ec34 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/474 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 02:24:03 +0000