aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-09-13target: Make profiling function more readableHsiangkai Wang
Change variable name 'length' to 'numBuckets'. It is more readable. Change-Id: I913cba0746f887adf6da401a46cd5e9ea88d2c6d Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1606 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13nds32: refine nds32_v2 implementHsiangkai Wang
Change-Id: I6e26ffbdcd426a15b34bff022964946f613f318c Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1569 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: support batch commandsHsiangkai Wang
Change-Id: I6846362d98374c93f45f339fb1279fc71721e696 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1584 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: Always setup SDP basic modeHsiangkai Wang
Change-Id: I1c0c11c2b9097b25324da0591edf036af207dbe9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1567 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13aice: use keep_alive() to avoid timeout warning messagesHsiangkai Wang
As polling $dbger, call keep_alive() to avoid timeout messages. Change-Id: Ia03d90535c2bd6049763209194c21f70fd8b7e8b Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1566 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13gdb_server: Do not set gdb_con->sync to true for new connectionsAnton Kolesov
In GDB connected to OpenOCD there is a command "monitor gdb_sync" which makes next stepi command to be ignored while GDB still will get an updated target state. This command sets gdb_connection->sync field to true to notify that stepi should be ignored. This field is set to true for all new connection and is set to false after first "continue" command. However if first resume command is stepi/nexti then it will be ignored and result will confuse GDB client, it will report that target received signal SIGINT. This patch sets this field to false for new connections, thus stepi/nexti will work properly when it is a first resume command. Change-Id: I7c9ebd69c3dc35f3e316041aa99f4e9d3425c0b6 Signed-off-by: Anton Kolesov <akolesov@synopsys.com> Reviewed-on: http://openocd.zylin.com/1587 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-13svf: off-by-one error; do not access after the allocated memoryPaul Fertser
Keep the promise and ensure there're at least 3 bytes available after the current position. This eliminates the errors reported by Valgrind. Change-Id: I1d0640e904c750eed808b2b4caf419b4d7619845 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1615 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-09-13target: Rewrite read/write buffer default implementationsAndreas Fritiofson
Rewrite the target_*_buffer_default to generate as large accesses as possible while maintaining natural alignment. These versions are easy to extend to generate 8-byte accesses to support 64-bit targets, although it requires some conformity from all target implementations (i.e. they need to refuse unsupported access sizes with some defined error code, so we can try again with a smaller one). Change-Id: I00ddcbb1d2fd33f9f8b99cb448cc93505a2421fc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1221 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-13[RFC] target: Move bulk_write_memory to arm7_9Andreas Fritiofson
The only remaining user is arm7_9 so remove it from the target API and add it to struct arm7_9_common to support all its variants with minimal changes. Many of the variants are likely not correct in the cache/mmu handling when the bulk write is triggered. This patch does nothing to change that, except for arm946e, where it was easier to do what might be the right thing. Change-Id: Ie73ac07507ff0936fefdb90760046cc8810ed182 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1220 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-10sysfsgpio: fix a typo in the informational outputPaul Fertser
Change-Id: I0c9bc281e4e913f9eacba3b8b60585217a1caf2e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1616 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-09-08fm3: add Fujitsu MB9Ax family supportNemui Trinomius
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: I52048f6e8e66b38087fa249eb66ceab6801d07d5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1506 Tested-by: jenkins
2013-09-08build: remove clang warning about global var 'match'Spencer Oliver
remove clang warning - "Argument to free() is the address of a global variable, which is not memory allocated by malloc()". Change-Id: I015273eafc9644207684b363434c6ae8149bfcde Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1613 Tested-by: jenkins
2013-09-08atmega: add new target supportNemui Trinomius
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: I6d6af10fb07ea43cc1196a90d8738957f8266938 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1507 Tested-by: jenkins
2013-09-08flash: add NXP LPC800 supportNemui Trinomius
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: I142fa6f29e66fd334baca14217aca97e1fc6c7d9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1509 Tested-by: jenkins
2013-09-08armv7m: use consistent arm.cpsr memberSpencer Oliver
We already set cpsr in armv7m_build_reg_cache, so lets use it for all other accesses to this field. Change-Id: I19b3b21ecf1571bbea12e1be664845e6544f6fa1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1539 Tested-by: jenkins
2013-09-08target: remove unimplemented target_request_data implementationsSpencer Oliver
Change-Id: Ia9afa83752d17f0f56bdf3bd81f5c69d108aa5e9 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1537 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-08target: check target supports target_request_dataSpencer Oliver
Make sure the target support target requests before we enable any receivers. Change-Id: I8ce42922eaff76fb5e7a114da716f2a6585a6ab5 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1536 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-08target: remove unimplemented soft_reset_halt implementationsSpencer Oliver
Let the default handler issue an unsupported warning rather than using empty handler routines that may/may not issue a unsupported warning. Change-Id: Iafe3e45146981a4cfae39771c3ab7370ac86da48 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1535 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com>
2013-09-08rtos: Do not dereference null pointersSpencer Oliver
detected by clang. Change-Id: Id395f9d33bc2903b29a158fc3540ae51857e6aa0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1555 Tested-by: jenkins
2013-09-08mini51: support for Nuvoton NuMicro Mini51 series flash memoryCosmin Gorgovan
Adds a flash driver for Nuvoton MINI51, MINI52 and MINI54 microcontrollers. At the moment, it only supports the erase and write operations. These microcontrollers have a 4 / 8 / 16 KB APROM for application code and a 2 KB LDROM for bootloaders. When the MCU has booted off the APROM, the LDROM isn't mapped in memory but can be programmed, and the other way around. This means that the ARM core is typically rebooted for programming. After a successful write or erase operation, it is rebooted again, using the initial boot source. This driver only supports programming the APROM. This driver is a pure JTAG implementation, it doesn't use any SRAM. I've tested it on a MINI54ZAN microcontroller using an ST-LINK/V2. With the microcontroller running at the default clock frequency of 22.1184 MHz, speed seems to be around 1.1 KB/s. Change-Id: I180889c55af9fb5614cd99a953b755baba14288a Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/1546 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-08kinetis: add kl flash supportSpencer Oliver
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 depends on http://openocd.zylin.com/1602 Change-Id: Ib846be48500a28d515c6dbd3ca2a5c1719cd74d4 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1508 Tested-by: jenkins Reviewed-by: Chris Fryer <chrisf1874@gmail.com> Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp>
2013-09-08jtag: drivers: Add JTAP VPI client driverFranck Jullien
This patch adds a driver for the jtag_vpi server [1]. This server is now part of the ORPSoC version 3 (OpenRISC Reference Platform SoC). The jtag_vpi server provides an interface between OpenOCD and a simulated core. [1] http://github.com/fjullien/jtag_vpi Change-Id: I717b72cace4845f66c878581345074f99002e21a Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1609 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29gdb server: do not free tdesc_filename earlySpencer Oliver
Issue caught by clang. Change-Id: I4fb331574512140b36e56b3b7ab7e8bdad5e013d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1554 Tested-by: jenkins
2013-08-29flash: fix stm32f1x dual bank detectionSpencer Oliver
Not all devices with devce id 0x419 have dual flash banks, only those with > 1024kB. Change-Id: I197d2b87df7599cd0837e25648af48439f2f1e50 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1544 Tested-by: jenkins
2013-08-29target: Remove error messages as no .get_gdb_fileio_infoHsiangkai Wang
If target does not support semi-hosting function, it has no need to provide .get_gdb_fileio_info callback. OpenOCD will use default function target_get_gdb_fileio_info_default. The default function just return ERROR_FAIL and gdb_server will treat every halted condition as normal halted and return "Txx" to gdb. Change-Id: I9ddb2be3a1145eae2ef5b712bdea89eb2e0fbc20 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1586 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-29stlink: Add workaround for intermittent FW info retrieval failureAndrey Smirnov
It appears that on some host USB configurations(2012 MacBook Air) multiple restarts of openocd tool cause the FW on STLINKv2 dongle to go into a weird state in which it will no longer respond to STLINK_GET_VERSION command. This patch adds code that, if said request fails for the first time, attempts to reset the device and retry to initialize it and obtain FW information one more time. Change-Id: I7227fc972adb49d52ae700ad48ab9f66b2aaa72c Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1561 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-29stlink_usb: remove gcc-specific constantAndrey Yurovsky
Replace 0b10 with 0x02, 0b is a GCC extension and isn't supported by clang, for instance, so compiling on OS X will fail. No functional changes. Change-Id: Ie882be1563df03e7ad3da0bc9aee65a907a29549 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1560 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-15stm32lx flash: fix flash size for Medium+ devicesAndrey Yurovsky
Unfortunately the Medium+ density and 0x436 devices have their F_SIZE register at a different location: 0x1FF800CC instead of 0x1FF8004C. Fix this for the 0x427 Medium+ devices and also the 0x436 devices. Furthermore, for 0x436 devices the flash size is reported as a 0 or 1 code rather than the size in Kb. Please see RM0038 r8 or newer for an explanation, as noted in the comments. Change-Id: Ie03b1e119a61f2a854bc2ccc5f90ce3e8852e272 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1522 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-07target: clear running_alg flag after resetPaul Fertser
After the target was reset we can be sure it's not running any algorithm. This fixes the following failure scenario: On my STM32F103 board after I start the firmware and then stop and try to "load" in gdb (before doing mon reset halt), I get Error: timeout waiting for algorithm, a target reset is recommended However, target reset doesn't help as the flag is still there ("Error: Target is already running an algorithm"), so I have no choice but to restart the OpenOCD process. I'm not sure yet what exactly prevents load from working after my firmware is initialised, most probably some interrupt is firing and my handler produces a fault due to garbled RAM. Change-Id: Idd977f2780a64d84800e3abd412cffc1ab6801b0 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1512 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07mdr32fx: support for Milandr's MDR32Fx internal flash memoryPaul Fertser
This adds example config and flash driver for russian Cortex-M3 microcontroller model. Run-time tested on MDR32F9Q2I evaluation board; the flash driver should be compatible with MDR32F2x (Cortex-M0) too but I lack hardware to test. There're no status bits at all, the datasheets specifies some delays for flash operations instead. All being in <100us range, they're hard to violate with JTAG, I hope. There're also no flash identification registers so the flash size and type has to be hardcoded into the config. The flashing is considerably complicated because the flash is split into pages, and each page consists of 4 interleaved non-consecutive "sectors" (on MDR32F9 only, MDR32F2 is single-sectored), so the fastest way is to latch the page and sector address and then write only the part that should go into the current page and current sector. Performance testing results with adapter_khz 1000 and the chip running on its default HSI 8MHz oscillator: When working area is specified, a target helper algorithm is used: wrote 131072 bytes from file testfile.bin in 3.698427s (34.609 KiB/s) This can theoretically be sped up by ~1.4 times if the helper algorithm is fed some kind of "loader instructions stream" to allow sector-by-sector writing. Pure JTAG implementation (when target memory area is not available) flashes all the 128k memory in 49.5s. Flashing "info" memory region is also implemented, but due to the overlapping memory addresses (resulting in incorrect memory map calculations for GDB) it can't be used at the same time, so OpenOCD needs to be started this way: -c "set IMEMORY true" -f target/mdr32f9q2i.cfg It also can't be read/verified because it's not memory-mapped anywhere ever, and OpenOCD NOR framework doesn't really allow to provide a custom handler that would be used when verifying. Change-Id: I80c0632da686d49856fdbf9e05d908846dd44316 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1532 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07stlink: add SWO tracing supportAndrey Yurovsky
Enable reading the SWO trace output via STLinkv2 dongles that support it. This adds an optional initialization parameter "trace" with which the user specifies a destination file where SWO trace output is appended as it comes in as well as the trace module's source clock rate. STLink will be configured for a 2MHz SWO data rate (STLink's highest supported rate) if the source clock is > 2MHz, otherwise the source clock is used as the data rate directly. For example: trace swo.log 168000000 If "trace" is specified with a usable file path, the stlink_usb driver will attempt to configure and read SWO trace data as follows: - on _run(), the target's TPI and TMI are configured and the STLinkv2 is told to enable tracing. Only generic ARM TPI and TMI registers are configured, any MCU-specific settings (ex: pin routing) are the responsibility of the target firmware. The configuration applied is based on the STLinkv2's capabilities (UART emulation). - on _v2_get_status(), the trace data (if any) is fetched from the STLink after the target status is checked and the target is found to be running. - on _halt(), the STLink is told to disable tracing. When fetching trace data, the entire trace frame is written to the output file and that data is flushed. An external tool may be used to parse the trace data into a more human-readable format. Tested on ARM Cortex M4F and M3 MCUs (STM32F407 and STM32L152). Change-Id: Ic3983d46c82ba77010c23b0e18ce7b275d917f12 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1524 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-07gdb_server: check target before executing event callbackHsiangkai Wang
As debugging multi-targets, every target has its own gdb connection. If there are two connections, gdb_target_callback_event_handler will be registered twice. Everytime event occurs, the registered callback will be executed twice. If both targets are running, as user issues ctrl-c in one gdb client, both connections will send "stop reply" to GDB clients even TARGET_EVENT_GDB_HALT is caused by one of them. The commit fix above problem as debugging multi-targets. Change-Id: I1e12d4846927d7dcf1e3bb9aeb1affabc80df813 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1501 Tested-by: jenkins Reviewed-by: Sergey Borshch <sb-sf@users.sourceforge.net> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07gdb_server: add target_debug_reason for program exit detectionHsiangkai Wang
Currently, there is no way to notify gdb that program has exited. Add new target_debug_reason called DBG_REASON_EXIT to notify gdb the condition has occured. If the debug reason is DBG_REASON_EXIT, gdb_server will send 'W' packet to tell gdb the process has exited. Change-Id: I7a371da292716a3e6ac4cc2c31b009a651fe047a Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1242 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07gdb_server: support File-I/O Remote Protocol ExtensionHsiangkai Wang
The File I/O remote protocol extension allows the target to use the host's file system and console I/O to perform various system calls. To use the function, targets need to prepare two callback functions: * get_gdb_finish_info: to get file I/O parameters from target * gdb_fileio_end: pass file I/O response to target As target is halted, gdb_server will try to get file-I/O information from target through target_get_gdb_fileio_info(). If the callback function returns ERROR_OK, gdb_server will initiate a file-I/O request to gdb. After gdb finishes system call, gdb will pass response of the system call to target through target_gdb_fileio_end() and continue to run(continue or step). To implement the function, I add a new data structure in struct target, called struct gdb_fileio_info, to record file I/O name and parameters. Details refer to GDB manual "File-I/O Remote Protocol Extension" Change-Id: I7f4d45e7c9e967b6d898dc79ba01d86bc46315d3 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1102 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07gdb server: new feature, add stop reason in stop reply packet for gdbHsiangkai Wang
In GDB remote serial protocol, the stop reply packet could contain more detail stop reason. The currently defined stop reasons are listed below. * watch * rwatch * awatch * library * replaylog This commit adds stop reason, watch/rwatch/awatch, in stop reply packet for just hit watchpoint. As manual indicates, at most one stop reason should be present. The function needs target to implement new hook, hit_watchpoint. The hook will fill the hit watchpoint in second parameter. The information will assist gdb to locate the watchpoint. If no such information, gdb needs to scan all watchpoints by itself. Refer to GDB Manual, D.3 Stop Reply Packets Change-Id: I1f70a1a9cc772e88e641b6171f1a009629a43bd1 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1092 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07gdb_server: support gdb target descriptionHsiangkai Wang
* Add a parameter in .get_gdb_reg_list() to return different register lists as generating target description. * Modify STRUCT REG to let gdb generate target description according to register information. The modified structure of register is struct reg { const char *name; uint32_t number; /* for regnum="num" */ struct reg_feature *feature; /* for register group feature name */ bool caller_save; /* for save-restore="yes|no" */ void *value; bool dirty; bool valid; bool exist; uint32_t size; struct reg_data_type *reg_data_type; /* for type="type" */ const char *group; /* for group="general|float|vector" */ void *arch_info; const struct reg_arch_type *type; }; Change-Id: I2096b67adf94518ba0b8b23d8c6a9f64ad7932b8 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1382 Tested-by: jenkins Reviewed-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-05jtag/drivers: usb_blaster cheap clone documentationRobert Jarzmik
Add documentation about the cheap clone based on the Cypress chip. The documentation has schematics data, and throughtput mesures. Change-Id: I51bf19ff9229565e178dd4c1231682bd9b4b7a8b Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1520 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-01flash: add Winbond w25q80bv spi supportNemui Trinomius
Not tested, adapted from http://tech.groups.yahoo.com/group/versaloon/message/391 Change-Id: Ibe87c617b3cdf70ee042112609ab46bea98a3e6d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1511 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-01mpsse: Add missing read buffer checksAndreas Fritiofson
These two unused functions added reads without checking for available space. Change-Id: I17dbbe9988b057e5a3a1768f405fc9d1027d1c01 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1500 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-01mpsse: Defer errors until flushAndreas Fritiofson
Simplify the API by making all MPSSE command functions return void instead of an error code. If there is an error during an implicit flush in a command call, further commands are ignored until an explicit flush is performed. The flush function returns and clears any error code set. The only command functions that still return an error code are those that can fail directly based on the type of the FTDI chip, i.e. when trying to enable RCLK or divide-by-5 on a non-high-speed chip. Adapt the ftdi adapter driver to the new API. Change-Id: I12979c723c81f7fd022c25821b029112f02b3f95 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1499 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-26lpcspifi: assume flash is unprotected after probingPaul Fertser
Since the driver doesn't support any hardware flash protection, it doesn't make sense to report "protected" status after probing, as it requires extra commands to unprotect before flashing and might be confusing for the end-users. Change-Id: I04d96790cc42412df5334951f39fb6723c972ced Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1525 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-26stm32f2x flash: add STM32F401 (F4 low power)Andrey Yurovsky
Add support for the new STM32F401 parts. These are similar to the STM32F405/407 however they are a new Low Power variant with ID code 0x423 and have 256K of Flash. Tested with a modified F4 discovery board. Change-Id: Ida5fb14a0832934b4d6d1ec11e602df5076edbc8 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1521 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-26rtos: issue warning on auto detect failureSpencer Oliver
Currently if we fail to auto detect an rtos then no warning is given. This can also be triggered if we only find some of the rtos symbols. Change-Id: I215991bbce0909bc6af93560b0f55db13defd123 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1514 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-26cortex_m: change cmd output to use cortex_m rather than cortex_m3Spencer Oliver
Change-Id: I33834910c44d22169bcf684e9697a8db49d0b396 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1513 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-17target: fix halt and wait_halt timeout unitsPaul Fertser
Documentation says they should be given values in milliseconds, DEFAULT_HALT_TIMEOUT matches that too. Change-Id: Ic1a30fa90f75b412c43fe50ba187d01c3d0a5fba Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1504 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-17etm: prevent segfault when reading bogus informationPaul Fertser
When I do not have the JTAG adapter connected to the target, I often end up always reading 1s from the chain. If the OpenOCD is configured to connect to an ETM-equipped target (i.MX25 ARM9 in my case), this results in writing garbage values in the etm reg_cache as the ETM bit fields for the comparators, counters and outputs are wider than the amount of entries in the corresponding arrays. This later results in a segfault in the first etm_reg_lookup() call. Change-Id: Ied81fdbf3a53a3dd749e2e5e97adf86c012df575 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1505 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-17mips: add breakpoint support for EJTAG 2.0Oleksij Rempel
EJTAG 1.5, 2.0 and 2.5 have different breakpoint register addresses. This patch add support of EJTAG 2.0, which is part some broadcom SoCs. This work was testet on Broadcom BCM7401. Change-Id: I4b0ee23871fa9205f9001b7c9165e7b6ebe9ccbf Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/1464 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-17mips32: add new functions mips32_configure_ibs and _dbsOleksij Rempel
Split function mips32_configure_break_unit to mips32_configure_ibs and mips32_configure_dbs to make code more readable. This will probably make work easyer with differnet EJTAG versions. Change-Id: I666f949fd7bc3656bdf75e7bcaadb164f15855dd Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/1463 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-17mips32_pracc: jump to 0xff20.0200 if cpu reads wrong addrOleksij Rempel
On some CPUs, like bcm7401 with EJTAG v2.0 we can have situation where CPU do not stops execution. For example, all CP0 commands will have this issue. In this case we should some hove recover our session. Currently jump to 0xff20.0200 seems to be good option. If it brake some thing on newer EJTAG, then check for EJTAG v2.0 should be added. Change-Id: Icd8841f38a1a85e0f7682b6dc358af8dfaae0744 Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Reviewed-on: http://openocd.zylin.com/1353 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-17mips32: add jump instructionOleksij Rempel
This instruction we will need to make jump to 0xff20.0000 Change-Id: Ic723e683e8848492cd8e186e71fd668dbd1d97e6 Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net> Reviewed-on: http://openocd.zylin.com/1338 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-20 22:42:09 +0000