aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2013-07-17ULINK driver: port from libusb-0.1 to libusb-1.0 APIMartin Schmölzer
The ULINK driver now uses libusb-1.0 calls (synchronous device I/O) directly (not the common layer provided by libusb1_common.c) Successfully tested with ULINK probe and STM32F103 (debug, erase and write flash). Change-Id: Ic037a3582db85e49a8cc1ec0dd36f629e4757929 Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at> Reviewed-on: http://openocd.zylin.com/1459 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15target: use consistent halt timeoutSpencer Oliver
On slow targets we sometimes get false messages about timeouts due to poll using 1sec rather than the default 5sec timeout. Change-Id: Icc81c78e0ca86cebf9eeb2f5307cf7a82f1f4ee8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1466 Tested-by: jenkins
2013-07-15jtag/drivers: trivial variable renamingRobert Jarzmik
Rename ublast_sleep() time variable from ms to us as the unit is in micro-seconds. Change-Id: I07ff9c36d302d5d59edb8a5faa73d78cdd6145a4 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1457 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15ulink: Move firmware install from pkglibdir to pkgdatadirAndreas Fritiofson
The precompiled OpenULINK firmware is just data to OpenOCD so I think it belongs in $(prefix)/share/openocd rather than in $(prefix)/lib. Change-Id: Id84c32cd0ddfb96861e903e8f23c16a81e1a0ca1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1487 Tested-by: jenkins Reviewed-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15automake: Don't install libopenocdAndreas Fritiofson
Regular users (and probably no-one else either) have no use for this library that is installed by default. Change-Id: Ie94e1550cec33f26ef9b68e7ce4f46494f18e644 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1479 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15dsp563xx: Adding breakpoint/watchpoint support.Bernhard Kiesbauer
Added missing breakpoint/watchpoint implementation to dsp563xx target. Implementation is not yet complete, which means it does not leverage all available features of the once debug interface. This does NOT use the openocd breakpoint/watchpoint command because of the "special" memory address spaces (X/Y/P/L) of the 56k DSP series. Change-Id: I6840a3ff1e6fdebb38ab7758f164886aff773af6 Signed-off-by: Bernhard Kiesbauer <bernhard@kiesbauer.com> Reviewed-on: http://openocd.zylin.com/1468 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15ftdi: Fix error in calloc retval checkAndreas Fritiofson
Found by clang. Change-Id: Iaa952b063779f4d392d8bdc62a3e7ce9daef2740 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1498 Tested-by: jenkins Reviewed-by: Laszlo Papp <lpapp@kde.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15flash/stm32*: Sync all device/rev IDs with reference manualsAndreas Fritiofson
Uppercase device/family names and change them to be more specific and consistent across all STM32 families. High-density STM32F10x has a Rev Y according to RM0008 Rev 14, so add it. I have a STM32F30x Rev Y, sitting on my desk, but it isn't described in the reference manual. Add it as well. Split the STM32L1xx Medium+ Density devices based on ID, to match the reference manual. If I read it correctly, the Medium+ devices have different revision mappings depending on their package/device ID. I have no real devices to examine, however. Change-Id: I5b95e5fa3cdeba219aa96838ea06ec1bb62bd921 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1497 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15flash/stm32*: Rewrite info functionsAndreas Fritiofson
Factor out common bit masking and printing code and use intermediate strings to avoid buffer size handling. Change-Id: I7d8c12df11ade6cdca8c917b5524372daa498bf4 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1496 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15flash/stm32*: Remove the halted check in protect_checkAndreas Fritiofson
These chips are capable of reading the flash registers while they're running. Change-Id: I76b90b2bae1aa79b5a063b2073faa5d3ed93cfd7 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15flash: add missing stm32l medium+ device idSpencer Oliver
The device was correctly used in stm32lx_probe but missing from stm32lx_get_info. Change-Id: If288b8df3210a945e727e4e27cfbdb948db32fc7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1491 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-07-15oocd_trace: fix warningsPaul Fertser
gcc (Gentoo Hardened 4.6.3 p1.13) produces a warning about the variable assigned but not used. write() can sometimes write less than the specified count so it's marked with warn_unused_result in the system headers and its return value can't be ignored. The most correct solution would be to have a loop writing the buffer until all bytes are written or an error is returned but here it's impractical. Change-Id: I75f7482e2b26fe0e6d70d34947518d3a8f0afe5c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1490 Reviewed-by: Laszlo Papp <lpapp@kde.org> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15target: remove double const specificatorPaul Fertser
Double const is bogus and breaks the build on Clang 3.3. Change-Id: I9f9394d17f66289ac74ae6dd48f3165483b72e9e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1489 Reviewed-by: Laszlo Papp <lpapp@kde.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-07-15versaloon: remove bogus assignmentPaul Fertser
This fixes the build with Clang 3.3. Change-Id: I729b4791c16178cdd4a87f7e1c04019da2c84b26 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1488 Reviewed-by: Laszlo Papp <lpapp@kde.org> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-15aice: fix FTBFS on ARMPaul Fertser
This fixes a bunch of errors like this: aice_usb.c: In function 'aice_pack_htdc': aice_usb.c:63:4: error: cast increases required alignment of target type [-Werror=cast-align] Compile-tested only. I think this can be seen as another justification for an ARM Jenkins build target. Also, the aice code I've seen so far seems to be assuming it runs on a little-endian machine so probably there're some endianness issues hiding. Hsiangkai, please get an old PowerPC Mac (or at least some fast usb-equipped MIPS SOHO WiFi AP/router for which you can cross-compile OpenOCD with OpenWrt) and do some real-life testing for your code on Big-Endian. I propose it to be a requirement for any non-trivial code submitted by a commercial entity of reasonable size. Change-Id: I45e05257687d0020d7172b26a8666ebc1950e00c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1477 Tested-by: jenkins Reviewed-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-08usb_blaster: maintainer-clean Makefile.inAndreas Fritiofson
Change-Id: I120fc13a353c63e12d89698869b30c8e751db074 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1480 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01target: xscale make reset init work properlyRobert Jarzmik
On XScale architecture, to write debug control register DCSR and activate JTAG debug (ie. to choose Halt Mode), the enabling can only be done while the board is held in reset state (ie. PXAxx #RST line held low). The current implementation writes to the register before asserting the SRST line. Swap the order to activate the SRST line before writing to DCSR. Change-Id: I914b9d53d39bdeb5fe4ee5e11068cafafe0da4d2 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1458 Tested-by: jenkins Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01target: xscale more human vector catchingRobert Jarzmik
Replace hexadecimal masks for vector catching with words representing the caught exception, such as dabt for data abort, etc ... This way, the new xscale command is : - xscale vector_catch Reads back to the user the current vector catching status - xscale vector_catch reset dabt pabt Sets the caught vectors to data abort and prefetch abort for example. This is mostly taken from Cortex-M3 openocd code. Change-Id: I66591d5796f0e07f0f31edc8d28722e1e48aa8c5 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1456 Tested-by: jenkins Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01at91sam3: Added support for at91sam3s8a, b and cUlf Wetzker
Only the support for at91sam3s8b is tested on real hardware. Change-Id: I4ce23bc2f6131d9cf3ff1b301ab9e470d20845ab Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1424 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01at91sam3: Added support for at91sam3sd8a and bUlf Wetzker
This update is untested due to missing hardware. Change-Id: Ibe286b741ebbb1c8ae0bd3dea4b8f3e12320ab34 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1423 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01flash/nor/at91sam3: fixed lock region sizeUlf Wetzker
According to the "AT91SAM ARM-based Flash MCU SAM3S Series datasheet" (http://www.atmel.com/Images/doc11090s.pdf) p. 30 the lock region size for the at91sam3sd9 family is 32 kbyte. This fix is only based on the datasheet due to missing hardware. Change-Id: Ic47b0642e4f11a60de477eaa0167038103b8ff15 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1422 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01Support for SST 39VF3201C NOR flashIS2T
* Add Thumb-2 code to write flash memories that don't support DQ5 polling * Make sure default values for unlock commands are set even if there is no PRI information given by the flash * Add a fixup to disable DQ5 polling for the SST 39VF3201C Change-Id: Ib08cf20547d0f500d5f78241521e6b49050c3d40 Signed-off-by: IS2T development team <dev.is2t@gmail.com> Reviewed-on: http://openocd.zylin.com/1449 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01armv4_5: prevent segfault when gdb connects to an underinitialised targetPaul Fertser
This prevents segmentation fault that can occur on cortex_a targets if gdb connection is established before it's halted and CPSR examined. Change-Id: Id996200e0fd95440496509c1fecaabbdbf425e23 Tested-by: Henrik Nordstrom <hno@squid-cache.org> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1446 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01keep gdb aware of threads if RTOS is set but no threads are createdZied Guermazi
if gdb server (openocd) answers qfThreadInfo with an empty string during boot, gdb will not request thread info anymore. to keep thread awareness in gdb, we have to answer with a non empty string, 'l' indicates an end of list, and is a valid answer here. Change-Id: I7870a5db1090c786f306db16a25871e69b8a9760 Signed-off-by: Zied Guermazi <guermazi.zied@gmail.com> Reviewed-on: http://openocd.zylin.com/1432 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01cortex_m: deprecate soft_reset_haltSpencer Oliver
soft_reset_halt was only really intended for the older arm arch, eg. armv4/5. Newer arch such as armv7m/mips do not need this as they have better alternatives. Change-Id: Ifb360680b7e4bfa5365f3c79d82574bded952b45 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1442 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-07-01Allow autoscan up to 64 bit IR lengthsAndreas Fritiofson
Change-Id: Ib15ff67b57606fe6c7997f3f9bd90e096acd5f3d Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01Add support for 64 bit parameter to irscanEvan Hunter
Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/831 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-29drivers/jtag: usb_blaster add pin controlsRobert Jarzmik
Add pin controls (pin6 and pin8). These pins can be controled either : - with a fixed value (0 or 1) - by TRST or SRST reset signal (driven low when signal activated). Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1448 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-06-21flash/nor/spi: uniform all hex data to lowercaseAntonio Borneo
Change-Id: I3daee7218283e521bf490993dba02a8658540951 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/1453 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21flash/nor/spi: add flash Micron n25q064Antonio Borneo
Change-Id: Ic39bb6d020767cece2eaa4e194071be8b002ece4 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/1452 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21Bus Pirate driver: Small assorted fixes.R. Diez
Fixes are: - Discard any stale data from the previous connection. - Disable CR/LF translation on the (virtual USB) serial port. - Increase the average USB packet size. The 1 KiB buffer was underutilised. - Option "buspirate_speed fast" now works out of the box. - Some extra comments, error checking, etc. Change-Id: I72c49d943a8ce9c5e5d1644ef90cb1482f93c618 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/1437 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-21stm32f2x: Correct calculation of number of 128k sectors.Andreas Fritiofson
Fixes regression introduced in 9785f51f that caused write outside allocated memory during probe of devices with <1024K flash. Reported-by: Alexander Pakhomov <ker0sin@yandex.ru> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Change-Id: Ifba8833e436064624efbf678162538fd351a5702 Reviewed-on: http://openocd.zylin.com/1450 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-14hla: Add Simulated DCC register for target communicatonBrent Roman
Change-Id: I193be169059caba661e46de8081d7e92f92cafee Signed-off-by: Brent Roman <brent@mbari.org> Reviewed-on: http://openocd.zylin.com/1364 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12[RFC] mips: Enable bulk write optimization for all writesAndreas Fritiofson
mips_m4k_bulk_write_memory was only called from target_write_buffer as an optimization when the word count was large enough. Remove mips_m4k_bulk_write_memory from the target type, causing the default implementation to call the regular mips_m4k_write_memory instead. Perform the dispatch to bulk write in mips_m4k_write_memory, enabling the optimization for target_write_memory() writes with size 4, in addition to target_write_buffer() writes. It also enables making the choice of bulk write vs regular write specifically for the architecture and not relying on the generic target code to make a sensible decision. Change-Id: I295f21a67ceaa195802403f2518ea2e0a025c1c7 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1215 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-06-12cfg: add stm32 flash driver aliasSpencer Oliver
This will enable the user to use either name when calling flash driver cmds. For example the stm32f3x family use the same flash driver as the stm32f1x, so the user has to use 'stm32f1x mass_erase 0' which can be confusing. Now the user can also use 'stm32f3x mass_erase 0' with the same result. Change-Id: I14280674c8dfa2ce1c01e327af7f38e36150462c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1428 Tested-by: jenkins
2013-06-12stm32: add new stm32f0 device idSpencer Oliver
updated from RM0091 rev4. Change-Id: Ic5e46229b85ce3974ef3016724d29a94037ac577 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1435 Tested-by: jenkins
2013-06-12cortex_a: remove memory leak on failureSpencer Oliver
If mem_ap_sel_write_atomic_u32 fails then tmp_buff may not be released. Detected by clang. Change-Id: I3d5416bd47d0eea61f61ec02ac5e43c82f114108 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1433 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-12Change variable scope.Jim Norris
Change scope of the variable gdb_reg_list_idx from global to module. Change-Id: Ib8273c0769c11c1d5a338e4711efbddb8e8a0243 Signed-off-by: Jim Norris <u17263@att.net> Reviewed-on: http://openocd.zylin.com/1441 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2013-06-12configure: remove --enable-libusb0 option, rework libusb selectionPaul Fertser
This makes libusb handling more consistent: if any driver requires libusb, first check for libusb-1 availability, if not found and libusb0 is ok for this case, try libusb0. A user-visible bug fixed by this is that when a user was selecting a driver that required libusb-1 but was lacking the necessary dev files or libraries, configure didn't complain (but the build was failing of course). --enable-stlink doesn't really require libusb-1 but since it's using the same automake symbol HLAADAPTER, ti_icdi is getting built too which needs libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway, leave that as is. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82 Reviewed-on: http://openocd.zylin.com/1434 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12libusb1_common, ftdi: clarify libusb_open error messagePaul Fertser
Print a user-friendly message when libusb_open() fails, e.g. Error: libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a permissions problem. Also output a configure warning if libusb older than 1.0.9 is detected. Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-10build: fix incorrect GPL address from last commitSpencer Oliver
962b3eb40cc5b69d9b3d6fcc4c5d56c4d204a307 included the old GPL address. Change-Id: I7affbdc3fc1c9251ea90796ab9eeef4d56ba4308 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05nds32: add new target type nds32_v2, nds32_v3, nds32_v3mHsiangkai Wang
Add target code for Andes targets. Change-Id: Ibf0e1b61b06127ca7d9ed502d98d7e2aeebbbe82 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1259 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-04drivers/jtag: rewrite usb_blaster driverRobert Jarzmik
Rewrite the Altera USB Blaster dongle driver : - make extensive use of byte-shift mode, to improve JTAG speed. This is the main reason of the rewrite. It improves the memory dumps with a factor 3 at least, and upload 100 times, from 1 kBytes/sec to 100 kBytes/sec with a USB-Blaster connected to an Altera Virtual JTAG TAP + OpenRISC CPU. - split the low level API part (between FTDI and FTD2xx) from core driver, so that in the future, if both libftdi and ftd2xx can coexist, the driver will be able to switch dynamically from one access to the other. Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Marek Czerski <ma.czerski@gmail.com> Tested-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/467 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Alexandre Becoulet <alexandre.becoulet@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-03cortex_m: print 'Cortex-M' rather than 'Cortex-M3'Spencer Oliver
This file is used by all the Cortex-M family not just Cortex-M3. Change-Id: Ie8680535b220c66bb8fcd862510407a46a73e8a0 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1429 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-03cortex_a: fix FTBS on ARM due to alignment issuesAndreas Fritiofson
Native compilation on RaspberryPi with gcc (Debian 4.6.3-1) 4.6.3 Target: arm-linux-gnueabi ends with error: cortex_a.c: In function 'cortex_a8_read_apb_ab_memory': cortex_a.c:2063:40: error: cast increases required alignment of target type [-Werror=cast-align] cc1: all warnings being treated as errors Also check for malloc failure. This patch is compile-tested only. Change-Id: I580c505424d03ac3a565de54182db22277c52ac1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1369 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-03rlink: fix speed table generationPaul Fertser
The speed table generation (by using explicit make -f Makefile.rlink) was broken since 865efd828a267992db0f2a92a731c5ce23a34236 Dec 2 2009 which did a bunch of renaming and included hand-editing of a generated rlink_speed_table.c file. This patch is compile-tested, i.e. the new generated rlink_speed_table.c links fine with the rlink driver. Change-Id: I1789a2f2f5bf20183b772d55c55fe68a0bd05cf5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1431 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 17:40:25 +0000