aboutsummaryrefslogtreecommitdiff
path: root/src/target
AgeCommit message (Collapse)Author
2007-12-20- removed flash write_image - binary compare function has been moved to ↵ntfreak
verify_image command - minor code reformat and cleanup - updated docs to include new commands git-svn-id: svn://svn.berlios.de/openocd/trunk@243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-18- added patch by Øyvind Harboe to Intel Hex Start Segment Address Record ↵ntfreak
(Type 3) - added support to parse Motorola Record Count (S5) git-svn-id: svn://svn.berlios.de/openocd/trunk@241 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-18- added patch for new flash functionality like:mifi
flash verify_image and flash erase_address. - added patch for new parport_write_on_exit command. Even this patch will fix some memory leaks. (thanks too oyvind and Spen for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@240 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-17- fixed relocation problems with image loading. Relocation is handledmifi
in a single centralized place, and it now works for binaries. (thanks to oyvind Harboe) git-svn-id: svn://svn.berlios.de/openocd/trunk@238 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-16- fixed ETM configuration register decodingdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@232 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-10- XScale DebugHandler code is now installed intobodylove
pkglibdir and loaded from there git-svn-id: svn://svn.berlios.de/openocd/trunk@222 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-09- added patch to display device information as INFO toomifi
- added patch which fixes a crash upon flash write error - added patch which will improve the reset handling when SRST is tied to TRST (thanks to Oyvind Harboe for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@218 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-04Do not overwrite code when removing software breakpoint if it no longer ↵vpalatin
contains bkpt instruction. (thanks to oyvind harboe for bug report and test) git-svn-id: svn://svn.berlios.de/openocd/trunk@214 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-11-21- reset_run now works as expected on cortex-m3ntfreak
- str9xpec erase status checked on option byte programming - stm32x flash driver now supports sector protection - surplus exit removed from flash.c - openocd.texi documentation added git-svn-id: svn://svn.berlios.de/openocd/trunk@212 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-22- add verify_image commandntfreak
- add support for gdb qCRC packet (compare-sections command) git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-08- cleaned up str7, str9 and stm32 flash driversntfreak
- str7 flash driver now checks correct busy bits depending on device - str9 flash driver now disables ITCM order as per st programming manual - added str7 disable_jtag command - added gdb_detach command - updated arm966e cp15 support - fix crash on mingw build when enabling target_request debugmsgs git-svn-id: svn://svn.berlios.de/openocd/trunk@209 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-01- flash autoerase <on|off> cmd added, default is off - flash banks are ↵ntfreak
calculated and erased prior to write (flash write_image only) - corrected array overrun in armv7m.c - corrected breakpoint memory allocation bug - image read now uses fgets, vastly improves reading of large files - improved hex file reading, support for Linear Address Record added git-svn-id: svn://svn.berlios.de/openocd/trunk@208 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-09-10- Fixed display of sector sizes in flash.cmlu
- Clean up, remove unused variables and code in armv7, cortex_m3 and stellaris code - Move restore_context from cortex_m3 to armv7m - Updated halt handling for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@206 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-09-05Patch by Michael Schwingen thatdrath
- adds support for the Altium universal JTAG cable - adds support for "wiggler2" cable (basically a wiggler with added LED, documentation coming soon) - adds LED support. The LED is turned on during data transfer - works fine on Altium and wiggler2. - adds PORT_EXIT pattern that is written to port when exiting, in order to turn off power on cables that get their power from parallel port data lines - move port writes (with the system-specific ifdefs) to one central function - increased image cache size to 2KB (might require more adaptive cache handling, e.g. LRU) git-svn-id: svn://svn.berlios.de/openocd/trunk@204 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-25- added support for setting JTAG frequency on ASIX PRESTO (thanks to Pavel ↵drath
Chromy) - usbprog update (thanks to Benedikt Sauter) - added embeddedice_send and _handshake functions (thanks to Pavel Chromy) - added support for 4, 8 and 16 bit ports to etb.c git-svn-id: svn://svn.berlios.de/openocd/trunk@203 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-21- correctly initialize start address for XScale trace buffer decodes in ↵drath
fill-once mode git-svn-id: svn://svn.berlios.de/openocd/trunk@202 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-17- renamed "xscale dump_trace_buffer" to "xscale dump_trace" and added code ↵drath
for it git-svn-id: svn://svn.berlios.de/openocd/trunk@198 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-16- update jtag_speed setting when changing it during runtime with a FT2232 ↵drath
based interface - use 'etm trigger_percent' setting when programming ETB trigger count - fixed some small bugs in ETM trace analysis - fixed minor bug in flash writing (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@197 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-14- reworked presto.c to allow use of either FTD2XX or libftdi (libftdi not ↵drath
functional yet). Configure option changed from --enable-presto to --enable-presto_ftd2xx and --enable-presto_libftdi - completed trace point support for use with ARM7/9 DCC - completed debug message output with support for HEX dumps (1, 2 or 4 byte quantities) - fixed bug in delete_debug_msg_receiver (thanks to Pavel Chromy) - fixed bug in image_add_section (thanks to Pavel Chromy) - at91sam7 sector erase reworked (thanks to Pavel Chromy) - merge consecutive sections during flash image write to work around possible section alignment issues with LPC2000 targets git-svn-id: svn://svn.berlios.de/openocd/trunk@194 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-10- renamed M5960 USB JTAG to "flyswatter"drath
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-09- trying to remove a breakpoint with target running should not exit(-1) from ↵mlu
OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@189 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-31- cleaned up cycle counting in ETM analysisdrath
- fixed broken OpenOCD version string git-svn-id: svn://svn.berlios.de/openocd/trunk@188 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-31- calculate cycles since last executed instruction when cycle-accurate ↵drath
tracing is enabled - increase memory pseudo-image cache size to 1024 byte for improved trace analysis performance - added OpenOCD+trace as an ETM capture driver example implementation - new usbprog driver (thanks to Benedikt Sauter) git-svn-id: svn://svn.berlios.de/openocd/trunk@186 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-31- motorola s19 file loader addedntfreak
- added checksum support to intel hex file loader - elf file loader now ignores any bss sections - mingw build now always opens files in binary mode git-svn-id: svn://svn.berlios.de/openocd/trunk@185 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-26- corrected stm32x_handle_options_write_command, incorrect options printedntfreak
- added prepare_reset_halt handler for cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@184 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-25- reformat src/jtag/bitq.c (thanks to Pavel Chromy)drath
- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin) - retry JTAG chain validation (thanks to Magnus Lundin) - reworked GDB packet input handling (thanks to Pavel Chromy) - output error message when setting a watchpoint failed - removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and ↵drath
Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-28- fixed endianness helper macros (thanks to obilix and wiml for finding and ↵drath
fixing this bug) - added declarations for 32bit fileio access functions (network byte order) - fixed bug in etm trace dump file handling - added XScale trace buffer decoding - fixed arm_simulator ERROR numbers (-7xx used twice) - fixed minor bug in debug output in stellaris.c git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-24- ST STM32x cortex support addedntfreak
- ST STM32x flash support added - cleaned up armv7m and cortex-m3 support, removed luminary specific code - cortex-m3 16bit read/write added (required for STM32x flash programming) git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-21- added support for Intel/Marvel PXA27x (XScale) targetsdrath
- added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging) - cleaned up errror handlers. only use when there's a catchable error - fix segfault when etm was configured without a valid driver git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-16- added mingw elf patches from Vincent Palatinntfreak
- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock - inttypes.h now used for long long printf style declarations git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-15- added support for pseudo image type "mem", currently only used for etm ↵drath
analysis: "etm image <target#> <dummy base address> mem" git-svn-id: svn://svn.berlios.de/openocd/trunk@173 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-14- merged support for Cortex-M3 from cortex-m3 branch (thanks to Magnus Lundin)drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@170 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-14- added manpage for OpenOCD (thanks to Uwe Hermann)drath
- fixed bug in ARM926EJ-S cache handling that caused cache linefills to be disabled after first debug entry - added support for auto image type detection (thanks to Vincent Palatin) - further work on ETM trace decoding (tested with a ETB interface using an ETM in normal 16-bit port mode, still experimental) git-svn-id: svn://svn.berlios.de/openocd/trunk@169 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-31- add support for ELF images (thanks to Vincent Palatin for this patch)drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@161 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-30- reworked image handling to support multiple sections (tested with ihex ↵drath
file containing gaps) This checkin is still experimental, not recommended for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- add missing file src/target/trace.hdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@157 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- add missing image handling filesdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@156 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- split fileio handling into fileio part and image handlingdrath
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported) - added XScale debug handler binary to repository - added Thumb disassembling (thanks to Vincent Palatin for this patch) - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported) This checkin is experimental, not suitable for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-10-- corrected embedded ice definitionsntfreak
-- changed arm966e to use standard arm9_7 reset handling git-svn-id: svn://svn.berlios.de/openocd/trunk@146 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-05- further work on ETB decoding (not yet functional)drath
- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs) git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-26- improved ETB trace outputdrath
- use BKPT instruction on cores supporting it (ARM926EJ-S, ARM966E-S) - correctly handle endianness of software breakpoint instruction git-svn-id: svn://svn.berlios.de/openocd/trunk@143 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-25- added support for error handlers to JTAG scan commands ↵drath
(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-16- explicitly disable monitor mode on ARM7/9 targetsdrath
- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target - arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-12- correctly mask out bits that aren't part of a copied bufferdrath
- fixed arm926ej-s CP15 register access handling - correctly identify SYSCLK source in LPC3180 NAND flash controller driver git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-11- disabled excessive debug output in jtag.hdrath
- output all of EmbeddedICE version register in error message - update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes - added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot) - enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware) git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-30- added support for Turtelizer 2 (USB JTAG interface) (Thanks to Michael ↵drath
Fischer for this patch) - fixed description of arm9tdmi vector_catch command git-svn-id: svn://svn.berlios.de/openocd/trunk@137 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-29- added "arm9tdmi vector_catch ['all'|'none'|'vec1 [vec2 [...]]']" commanddrath
- added missing arm926ej-s cp15 patch (thanks Vincent Palatin) git-svn-id: svn://svn.berlios.de/openocd/trunk@136 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-28- merged XScale branch back into trunkdrath
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-26- fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)drath
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 17:22:25 +0000