aboutsummaryrefslogtreecommitdiff
path: root/src/target
AgeCommit message (Collapse)Author
2008-08-05halting srst_pulls_trst targets is now snappier and has explicit warning.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@889 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05define resetting the target into the halted or runningoharboe
state as an atomic operation. git-svn-id: svn://svn.berlios.de/openocd/trunk@888 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05moves handling of problems with resetting into the halted stateoharboe
into the target implementation. Also target_process_reset() is now simpler and has error handling, e.g. if assert reset fails, then target_process_reset() will propagate that error. cmd_ctx was passed in to examine(), which is wrong - removed that. git-svn-id: svn://svn.berlios.de/openocd/trunk@887 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-01The reset routine now works w/LPC2148 out of the box.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@885 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-31wait up to 1 second for halted state upon reset init/halt.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@884 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-28allow minidrivers to implement inner loop of dcc memory writesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@879 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-28fixed gaffe mea culpaoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@878 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-28retired reset run_and_init/haltoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@877 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-26add check for target_read/write_buffer 32 bit wrap.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@875 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-26- merged mips target into svn trunkntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@874 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25minimum address and maximum length argument to load_image. Used in lieu of ↵oharboe
reset init script when executable w/reset init sequence is available. git-svn-id: svn://svn.berlios.de/openocd/trunk@873 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25added yours sincerely for files where I feel that I've made non-trivial ↵oharboe
contributions. git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24retire daemon_startupoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@868 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24wait 500ms for target to halt upon connect.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@865 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-23- fix typontfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@862 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21- jtag_khz/speed are now single parameter only. These are usedoharboe
from pre/post_reset event scripts. Adding the second parameter was a mistake seen in retrospect. this gives precise control in post_reset for *when* the post reset speed is set. The pre_reset event was added *after* the second parameter to jtag_khz/speed - the target implementations no longer gets involved in the reset mode scheme. Either they reset a target into a halted mode or not. target_process_reset() detects if the reset halt failed or not. - tcl target event names are now target_N_name. Mainly internal at this early stage, but best to get the naming right now. - added hardcoded reset modes from gdb_server.c. I don't know precisely what these defaults should be or if it should be made configurable. Perhaps some hardcoded defaults will do for now and it can be made configurable later. - bugfix in cortex_m3.c for reset_run_and_xxx? - issue syntax error upon obsolete argument in target command instead of printing message that will surely drown in the log git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21use reset init explicitly before "load".oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@847 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-20openocd@duaneellis.com fix naming confusion. Use ocd_ prefix for ocd API ↵oharboe
consistently. git-svn-id: svn://svn.berlios.de/openocd/trunk@839 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-19clarify error message w.r.t. not being able to set breakpointoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@836 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18remove obsolete reset_mode oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@833 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18"reset" without arguments now execute a "reset run".oharboe
the reset mode argument to the target command is deprecated(ignored w/error message). git-svn-id: svn://svn.berlios.de/openocd/trunk@832 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18- fix incorrectly registered function openocd_array2memntfreak
- removed unused variables - reformatted lpc288x.[ch] - fixed helper/Makefile.am dependencies - add correct svn props to added files git-svn-id: svn://svn.berlios.de/openocd/trunk@829 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18resume is now asynchronousoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@828 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-181. GDB will print cryptic error messages if it is not fed keep-alive packetsoharboe
within the last 2000ms. To fix this, add keep_alive() if you are spending >1000ms in an algorithm thus holding up the server loop. target_call_timer_callbacks() invokes keep_alive(). 2. post_reset script is now executed at normal JTAG speed and not reset speed. 3. Resume is now synchronous again. Hopefully it will work this time. git-svn-id: svn://svn.berlios.de/openocd/trunk@826 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18Duane Ellis <openocd@duaneellis.com> more interface files.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@825 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18Charles Hardin <ckhardin@gmail.com> move tcl stuff nearer to where it belongs.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18added missing "reset+load" sequence.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@823 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17Charles Hardin <ckhardin@gmail.com> and Øyvind Harboeoharboe
This patch just uses the command.c interface to create tcl commands for the root level commands and avoids a bit of the "TCL" bleed into the rest of the openocd code. Multilevel commands also supported. git-svn-id: svn://svn.berlios.de/openocd/trunk@818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17- reverted resume_target to old behaviourntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@817 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-16better error messages for target event scripts.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@810 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11- retired variable stuff. oharboe
- drscan is now a low level tcl command: execute DR scan <device> <num_bits> <value> <num_bits1> <value2> - removed obsolete partial command text support git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11.cfg files are now executed as Jim Tcl. Commands that terminate script ↵oharboe
w/error message. git-svn-id: svn://svn.berlios.de/openocd/trunk@790 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-09- adding missing install entry for luminary-libftdi.cfg ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@780 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-09- added luminary libftdi interface configntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@778 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-09- only check normal resume, not debug resumentfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@777 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-09- target_resume is now synchronous with 5sec timeoutntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@775 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-08tcl regression fixes.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@774 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-08- removed target_process_events as only used in handle_resume_command and ↵ntfreak
events will be called anyway by poll git-svn-id: svn://svn.berlios.de/openocd/trunk@772 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-08- fix pre_resume script not being calledntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@771 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-07reset event is synonym for post_reset event. oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@769 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-06- fixed build issues with win32ntfreak
- fixed build warnings for last commit - set svn props for last commit git-svn-id: svn://svn.berlios.de/openocd/trunk@760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-06src/helper/configuration.hoharboe
- Log output handlers now get a "const char *line" - Added "const" to parameter. src/helper/command.c src/helper/command.h - New function: 'command_output_text()' - Log output handlers now get a "const char *line" src/helper/options.c - Log output handlers now get a "const char *line" src/server/telnet_server.c - DO not transmit NULL bytes via TELNET. - Log output handlers now get a "const char *line" src/server/gdb_server.c - Log output handlers now get a "const char *line" *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.c *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.h *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/openocd.c - **MAJOR** Work: New TCL/Jim function: mem2array - **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users. - Previously: TCL output did not go to GDB. - Previously: TCL output did not go to TELNET - Previously: TCL output only goes to control console. - This fixes that problem. + Created callbacks: +openocd_jim_fwrite() +openocd_jim_fread() +openocd_jim_vfprintf() +openocd_jim_fflush() +openocd_jim_fgets() src/Makefile.am - New TCL files. - Future note: This should be more automated. As the list of 'tcl' files grows maintaning this list will suck. src/Jim.c - ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER ** - that impliments many [format] specifies JIM did not support. - Jim_FormatString() - **MAJOR** work. - Previously only supported "%s" "%d" and "%c" - And what support existed had bugs. - NEW: *MANY* formating parameters are now supported. - TODO: The "precision" specifier is not supported. ** NEW ** This patch. - Jim_StringToWide() test if no conversion occured. - Jim_StringToIndex() test if no conversion occured. - Jim_StringToDouble() test if no conversion occured. ** NEW ** This Patch. Major Work. - Previously output from JIM did not get sent to GDB - Ditto: Output to Telnet session. - Above items are now fixed - By introducing callbacks new function pointers in the "interp" structure. - Helpers that call the callbacks. - New function: Jim_fprintf() - New function: Jim_vfprintf() - New function: Jim_fwrite() - New function: Jim_fread() - New function: Jim_fflush() - New function: Jim_fgets() By default: the output is to STDIO as previous. The "openocd.c" - redirects the output as needed. - Jim_Panic() - Send panic to both STDERR and the interps specified STDERR output as a 2nd choice. - Now JIM's "stdin/stdout/stderr" paramters are "void *" and are no longer "FILE *". src/Jim.h - **MAJOR** - New JIM STDIO callbacks in the "interp" structure. - change: "stdin/stdout/stderr" are now "void *" cookies. - New JIM stdio helper functions. git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04- added event scripts for str73x and str75x targetsntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@751 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04- added jtag_khz to target scriptsntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@750 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04- fixed line endings with commands.tclntfreak
- added svn props for newly added files git-svn-id: svn://svn.berlios.de/openocd/trunk@749 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04tcl tinkering.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@748 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04typooharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@745 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04tcl config script exampleoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@744 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04ARM11 update. OpenOCD supports starting without being able to talk to the ↵oharboe
hardware. git-svn-id: svn://svn.berlios.de/openocd/trunk@741 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-04Valentin Longchamp target script for mx31.cfgoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@740 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 17:38:55 +0000