aboutsummaryrefslogtreecommitdiff
path: root/src/target
AgeCommit message (Collapse)Author
2009-10-19Improve Makefile rules for XScale debug handler; fixes 'make distcheck'.Zachary T Welch
2009-10-19fix single step of bx instruction going into Thumb modeNicolas Pitre
Without this fix, the following code cannot be single stepped: add ip, pc, #1 bx ip [thumb code here]
2009-10-17More MinGW C99 printf complianceRedirect 'Slash' NIL
Passing "--std=gun99" is unfortunately not sufficient to make current MinGW compilers conform with respect to checking printf format strings. (The C runtime seems not to have problems.) Fix by using a "gnu_printf" format specifier not "printf".
2009-10-17build tweak for bin2charDavid Brownell
Work better when building outside the source tree. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-16xscale: better fix for debug_handler.binDavid Brownell
Generate a C struct with the data, and use that, instead of an assembly language file. The assembly language causes issues on Darwin and MS-Windows, which don't necessarily use GNU AS; or if they do, don't necessarily use its ELF syntax. It's also better in two other ways: fewer global symbols; and the init-time size check gets optimized away at compile time. (Unless it fails, in which case bigger chunks of the file vanish.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-14portability updatesDavid Brownell
Based on some patches from <redirect.slash.nil@gmail.com> for preliminary Win64 compilation. More such updates are needed, but they need work. Compile tested on 64 and 32 bit Linuxes, and Cygwin. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-14Work in progress on arm11 reset. Assert srst.Øyvind Harboe
2009-10-14Fix problems building xscale_debug.SDavid Brownell
2009-10-13fix detection of PLD instructionsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-13fix pass_condition() LE condition code checkLennert Buytenhek
The LE check is obviously buggy (as easily triggered during some testing), but I didn't audit the rest of the cases. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-13Cleanup: nuke trailling whitespacesYauheni Kaliuta
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
2009-10-13Do not replace virt2phys with the default one if it was assignedYauheni Kaliuta
Signed-off-by: Yauheni Kaliuta <y.kaliuta@gmail.com>
2009-10-13Fix warning.Øyvind Harboe
2009-10-13Delete commented out code. Add a bit of error checking.Øyvind Harboe
2009-10-13Propagate error from assert, deassert and halt on tcl target object.Øyvind Harboe
2009-10-13xscale: stackframe corruption bugfixDavid Brownell
Resolve a "FIX" comment; yes that was superfluous given that the JTAG core does that check by default. It was also buggy since it wrote to a stack frame that went away before the write happened!! Other fixes: remove pointless malloc(); zero-init scan_field_t values wherever they appear; whitespace scrub; spelling fix. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12More error propagation fixes.Øyvind Harboe
2009-10-12arm11 burst writes are now only enabled for writes larger than 1 word. ↵Øyvind Harboe
Single word writes are frequently used from reset init scripts to non-memory peripherals.
2009-10-12Retire arm11 no_increment. Intended for future expansion to read/write to ↵Øyvind Harboe
ports. New arm11 commands would have to be added to exploit it.
2009-10-12Propagate wDTR/rDTR failure immediately, otherwise it's followed up by ↵Øyvind Harboe
timeout errors.
2009-10-12Fix warning and improve error message upon burst transfer failureØyvind Harboe
2009-10-12Fix bogus 'transfer errors' with arm11 'memwrite burst enable'. A regression ↵Øyvind Harboe
introduced in b8103660fa36a77158bd77379572c09913d85c00
2009-10-12simplify XScale debug handler installationDavid Brownell
Load the XScale debug handler from the read-only data section instead of from a separate file that can get lost or garbaged. This eliminates installation and versioning issues, and also speeds up reset handling a bit. Plus some minor bits of cleanup related to loading that handler: comments about just what this handler does, and check fault codes while writing it into the mini-icache. The only behavioral changes should be cleaner failure modes after errors during handler loading, and being a bit faster. NOTE: presumes GNU assembly syntax, with ".incbin"; and ELF, because of the syntax of the ".size" directive. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12more xscale cleanup (mostly removing JTAG hooks)David Brownell
Streamline/shrink some needless JTAG stuff: - Use #defines for the JTAG instructions; they can't ever change - Remove an unused (!) shadow of tap->ir_length - Stop using a copy of target->tap - Don't bother saving the variant after sanity checking ir_length Also, make target_create() work as on other targets: build the register cache later, making init_target() no longer be a NOP. Handle malloc failure; remove a comment that was obsoleted by the not-so-new target syntax. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-12Merge commit 'origin/master'Øyvind Harboe
2009-10-12If halt times out, stop GDB. Allows e.g. manual reset via monitor commands.Øyvind Harboe
2009-10-11xscale_load_ic cleanupDavid Brownell
Remove unused and deprecated (in the arch spec) mode for loading code into the *main* icache (vs the "mini" icache). Disable some extremely noisy (and rarely useful) low-level debug messages Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-11xscale.c cleanupDavid Brownell
Declare almost everything as static. Move stuff to remove most forward references. Remove most forward declarations. Warn if the unimplemented register functions get called. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-11xscale bugfix to handler loadingDavid Brownell
Just fill out the rest of the cache line with NOPs; don't change the record of how much data we consumed. Otherwise the count of how much data is left can roll over from positive to negative ("VERY positive") and skip the loop termination of zero. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-11xscale minor cleanupDavid Brownell
Add a header comment referencing useful XScale specs. Make most data static, and the tables readonly. Scrub extra blank lines. Return fault codes from one routine. Remove a needless NOP methood. (BUGFIX) When we update R0, mark R0 as dirty/valid ... not R15/PC! Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-10printf format warning fixesDavid Brownell
Observed on a Cygwin build. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-09ARM11 error checkingØyvind Harboe
2009-10-08prevent abort via polling during jtag_resetDavid Brownell
Observed: openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0' failed. The issue was that nothing disabled background polling during calls from the TCL shell to "jtag_reset 1 1". Fix by moving the existing poll-disable mechanism to the JTAG layer where it belongs, and then augmenting it to always pay attention to TRST and SRST. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08Stop GDB when polling fails, srst assert or powerdropout is detectedØyvind Harboe
2009-10-07buildfixdbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2821 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Updates for "reset_config":dbrownell
- revert to previous default: don't talk JTAG during SRST - add "srst_nogates" flag, the converse of "srst_gates_jtag" - with no args, display the current configuration And update the User's Guide text with bullet lists to be a bit more clear. git-svn-id: svn://svn.berlios.de/openocd/trunk@2818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07add timeouts and fix syntax error handling of mrc/mcr commands.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2815 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07add timeouts and fix syntax error handling of mrc/mcr commands.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2814 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Dragonite has the same EICE affliction as feroceon.dbrownell
From: Nicolas Pitre <nico@fluxnic.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@2807 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Minor cleanup to ARM926 debug entry:dbrownell
- don't needlessly export this function - handle "case 0" debug method-of-entry better (silent by default) The "case 0" is a valid debug entry mode so it doesn't deserve the warning int now gets. But it probably means that OpenOCD confused itself somehow; or that it confused the ARM9EJS target. git-svn-id: svn://svn.berlios.de/openocd/trunk@2799 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02It is not possible to invalidate I-Cache on memory writes while the target ↵mlu
is running git-svn-id: svn://svn.berlios.de/openocd/trunk@2795 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Make sure that DSCR_DTR_RX is not full before writingmlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2794 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02More error reporting in Cortex_a8 execute_opcodemlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2793 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Added asser_reset and deassert_reset for cortex_a8mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2792 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Added asser_reset and deassert_reset for cortex_a8mlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-02Minor ETB and ETM bugfixes and doc updatesdbrownell
- ETB * report _actual_ hardware status, not just expected status * add a missing diagnostic on a potential ETB setup error * prefix any diagnostics with "ETB" - ETM * make "etm status" show ETM hardware status too, instead of just traceport status (which previously was fake, sigh) - Docs * flesh out "etm tracemode" docs a bit * clarify "etm status" ... previously it was traceport status * explain "etm trigger_percent" as a *traceport* option ETM+ETB tracing still isn't behaving, but now I can see that part of the reason is that the ETB turns itself off almost immediately after being enabled, and before collecting any data. git-svn-id: svn://svn.berlios.de/openocd/trunk@2790 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-01ARMv7A: Report fault status registers when in Abort statemlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2789 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-30Add DSCR_DTR_RX_FULL bit definemlu
git-svn-id: svn://svn.berlios.de/openocd/trunk@2780 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29ARM11 command handling fixesdbrownell
- Commands were supposed to have been "arm11 memwrite ..." not "memwrite ..." - Get rid of obfuscatory macros - Re-alphabetize - Add docs for "arm11 vcr" git-svn-id: svn://svn.berlios.de/openocd/trunk@2776 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29ETM: fix build issue on MinGW.dbrownell
The Win32 global namespace is rather cluttered... git-svn-id: svn://svn.berlios.de/openocd/trunk@2773 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 08:44:31 +0000