aboutsummaryrefslogtreecommitdiff
path: root/src/target
AgeCommit message (Collapse)Author
2007-05-30- reworked image handling to support multiple sections (tested with ihex ↵drath
file containing gaps) This checkin is still experimental, not recommended for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@159 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- add missing file src/target/trace.hdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@157 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- add missing image handling filesdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@156 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-29- split fileio handling into fileio part and image handlingdrath
- reworked etm/etb into a generic etm part with trace capture drivers (currently only etb supported) - added XScale debug handler binary to repository - added Thumb disassembling (thanks to Vincent Palatin for this patch) - added support for non-CFI compatible flashes to cfi driver (currently only SST39VFxxx devices supported) This checkin is experimental, not suitable for general use git-svn-id: svn://svn.berlios.de/openocd/trunk@155 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-10-- corrected embedded ice definitionsntfreak
-- changed arm966e to use standard arm9_7 reset handling git-svn-id: svn://svn.berlios.de/openocd/trunk@146 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-05-05- further work on ETB decoding (not yet functional)drath
- fixed several uses of uninitialized bits (Thanks to Vincent Palatin for finding and fixing these bugs) git-svn-id: svn://svn.berlios.de/openocd/trunk@145 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-26- improved ETB trace outputdrath
- use BKPT instruction on cores supporting it (ARM926EJ-S, ARM966E-S) - correctly handle endianness of software breakpoint instruction git-svn-id: svn://svn.berlios.de/openocd/trunk@143 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-25- added support for error handlers to JTAG scan commands ↵drath
(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-16- explicitly disable monitor mode on ARM7/9 targetsdrath
- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target - arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-12- correctly mask out bits that aren't part of a copied bufferdrath
- fixed arm926ej-s CP15 register access handling - correctly identify SYSCLK source in LPC3180 NAND flash controller driver git-svn-id: svn://svn.berlios.de/openocd/trunk@139 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-11- disabled excessive debug output in jtag.hdrath
- output all of EmbeddedICE version register in error message - update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes - added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot) - enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware) git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-30- added support for Turtelizer 2 (USB JTAG interface) (Thanks to Michael ↵drath
Fischer for this patch) - fixed description of arm9tdmi vector_catch command git-svn-id: svn://svn.berlios.de/openocd/trunk@137 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-29- added "arm9tdmi vector_catch ['all'|'none'|'vec1 [vec2 [...]]']" commanddrath
- added missing arm926ej-s cp15 patch (thanks Vincent Palatin) git-svn-id: svn://svn.berlios.de/openocd/trunk@136 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-28- merged XScale branch back into trunkdrath
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-26- fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)drath
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-15- reworked file i/o. every fileaccess (target, flash, nand, in future ↵drath
configuration, too) should now go through the fileio subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers (preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far) - added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-02-03- add missing parentheses around macro parameters (thanks to Matthias Bauch ↵drath
for noticing this bug and providing a fix) git-svn-id: svn://svn.berlios.de/openocd/trunk@130 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-26- disabled use of single-step bit for EmbeddedICE version 6 coresdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@128 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-25- Added support for ARM926EJ-S based coresdrath
- Added contributors to AUTHORS file - Added link to Joern Kaipf's OOCD-Link git-svn-id: svn://svn.berlios.de/openocd/trunk@126 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-22- fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)drath
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin) - fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this) - add support for reading JTAG device id (currently only as debug output on startup) - cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number. - small cleanups/fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-09- disabled FT2232 debug output (that code should be fairly stable)drath
- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands - added lattice ISP cable (experimental) - properly initialize parallel port (clear tristate bit) - fixed jtag/Makefile.am that failed with some versions of autotools - print error number if read() in gdbserver.c failed on Windows - fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug) - added support for AT91SAM7SE internal flash git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. ↵drath
configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-07- added support for the oocd-link ↵drath
(http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink) - fixed breakpoint handling (this changes the target_t interface) git-svn-id: svn://svn.berlios.de/openocd/trunk@113 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-05- correctly enter debug state on a "soft_reset_halt" commanddrath
- several small fixes - retry reading from a FT2232 device on incomplete reads git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-10-23- several small fixes (thanks to Magnus Lundin and Spencer Oliver)drath
- added support for using Luminary Micro development board 'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin) git-svn-id: svn://svn.berlios.de/openocd/trunk@106 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-10-19- fixed endianness handling in arm7_9_read_core_reg (thanks to Magnus Lundin ↵drath
for reporting this) - correctly handle ft2232_device_desc and ft2232_serial when both are given at the same time git-svn-id: svn://svn.berlios.de/openocd/trunk@104 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-10-12- allow FT2232 devices to be opened by serial number instead of device ↵drath
description ('ft2232_serial <serial>' command) - redirect output from target event scripts (currently only reset) to the daemon output (INFO:) - some minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@103 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-28- str9x flash support (Thanks to Spencer Oliver)drath
- str75x flash support (Thanks to Spencer Oliver) - correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this) - core-state (ARM/Thumb) can be switched by modifying CPSR - fixed bug in gdb_server register handling - register values > 32-bit should now be supported - several minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-09- set the T bit in the CPSR when the core was executing in Thumb state. Mask ↵drath
the T bit from the CPSR for all CPSR-writing operations git-svn-id: svn://svn.berlios.de/openocd/trunk@97 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-04- added debug output for D/I FSR and FAR (arm920t)drath
- fixed bug that caused CPSR to be corrupted in Thumb mode git-svn-id: svn://svn.berlios.de/openocd/trunk@93 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31- endianess fixes everywhere but in the flash code. flashing might still be ↵drath
broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-20- made bp command more verbosedrath
- fixed bug that could result in register corruption on arm920t targets git-svn-id: svn://svn.berlios.de/openocd/trunk@89 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-06- fixed a minor problem with the GDB server that could drop the first packet ↵drath
(non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver) git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-30- added configurable delays after reset lines get deasserted. useful if ↵drath
reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17- Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- fixed bug in Thumb sw breakpoint handling (thanks to Spen for this patch)drath
- fixed handling of services linked list (thanks to Spen for this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@76 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- changed use of bzero (deprecated) to memset (thanks to Spen for pointing ↵drath
this out) - changed fallback implementation of strndup to something that works on all systems (thanks to Spen for this patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@75 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-23- added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-16- keep additional information for decoded instructionsdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@69 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-12- the 'help' command now takes an optional argument to display help only on ↵drath
a certain command (thanks to Andrew Dyer for this enhancement) - OpenOCD now includes the ability to diassemble instructions on its own (only ARM for now, Thumb might follow). The command is "armv4_5 disassemble <address> <count> ['thumb']" (thumb is currently unsupported). I've compared the produced disassembly against GDB/GNU Objdump output, and it seems to be correct, but there may still be some bugs left. git-svn-id: svn://svn.berlios.de/openocd/trunk@68 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 08:38:23 +0000