aboutsummaryrefslogtreecommitdiff
path: root/src/target/xscale.c
AgeCommit message (Collapse)Author
2008-08-05Duane Ellis: fix warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05define resetting the target into the halted or runningoharboe
state as an atomic operation. git-svn-id: svn://svn.berlios.de/openocd/trunk@888 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25added yours sincerely for files where I feel that I've made non-trivial ↵oharboe
contributions. git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21- jtag_khz/speed are now single parameter only. These are usedoharboe
from pre/post_reset event scripts. Adding the second parameter was a mistake seen in retrospect. this gives precise control in post_reset for *when* the post reset speed is set. The pre_reset event was added *after* the second parameter to jtag_khz/speed - the target implementations no longer gets involved in the reset mode scheme. Either they reset a target into a halted mode or not. target_process_reset() detects if the reset halt failed or not. - tcl target event names are now target_N_name. Mainly internal at this early stage, but best to get the naming right now. - added hardcoded reset modes from gdb_server.c. I don't know precisely what these defaults should be or if it should be made configurable. Perhaps some hardcoded defaults will do for now and it can be made configurable later. - bugfix in cortex_m3.c for reset_run_and_xxx? - issue syntax error upon obsolete argument in target command instead of printing message that will surely drown in the log git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-29- added checksum_memory and blank_check_memory for xscalentfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-27- moved flash erase_check target code to target.cntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@694 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-19Fix crash when mode number fetched from the target is invalid.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@667 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-14retired fast_memory_access. It's always fast now.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@578 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-14TRST is asserted *before* target->type->assert_reset() is invoked. Removed ↵oharboe
old code. git-svn-id: svn://svn.berlios.de/openocd/trunk@574 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11Improved XScale performance for embedded hosted OpenOCDoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@562 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-04- reverted some of the changes that possibly broke arm926ejs. Waitingoharboe
for a bit more info before I can tell with confidence whether or not this would have any effect. - worked on error propagation and output for flash git-svn-id: svn://svn.berlios.de/openocd/trunk@539 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-03- Work on fixing erase check. Many implementations are plain broken.oharboe
Wrote a default flash erase check fn which uses CFI's target algorithm w/fallback to memory reads. - "flash info" no longer prints erase status as it is stale. - "flash erase_check" now prints erase status. erase check can take a *long* time. Work in progress - arm7/9 with seperate srst & trst now supports reset init/halt after a power outage. arm7/9 no longer makes any assumptions about state of target when reset is asserted. - fixes for srst & trst capable arm7/9 with reset init/halt - prepare_reset_halt retired. This code needs to be inside assert_reset anyway - haven't been able to get stm32 write algorithm to work. Fallback flash write does work. Haven't found a version of openocd trunk where this works. - added target_free_all_working_areas_restore() which can let be of restoring backups. This is needed when asserting reset as the target must be assumed to be an unknown state. Added some comments to working areas API - str9 reset script fixes - some guidelines - fixed dangling callbacks upon reset timeout git-svn-id: svn://svn.berlios.de/openocd/trunk@536 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-25- rename log functions to stop conflicts under win32 (wingdi)ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13XScale excessive waiting fix.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@509 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-12fixed regression in XScale introduce in 297oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@503 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11With the recent changes the TRST needs to happen for every reset.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@498 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11retire unused code.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@494 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-07- Improves error handling upon GDB connectoharboe
- switch to synchronous halt during connect. This fixes the bug where poll() was not invoked between halt() and servicing the 'g' register packet - halt() no longer returns error code when target is already halted, just logs a warning. Only the halt() implementation can say anything meaningful about why a halt() failed, so error messages are pushed up to halt() - fixed soft_reset_halt infinite loop bug in arm7_9_common.c. The rest of the implementations are still busted. - by using USER() instead of command_print() the log gets the source + line #. Nice. - no longer invoke exit() if soft_reset_halt fails. A reset can often fix the problem. git-svn-id: svn://svn.berlios.de/openocd/trunk@475 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-07Added some timeout handling to XScale so OpenOCD doesn't getoharboe
completely stuck when the target needs a reset. git-svn-id: svn://svn.berlios.de/openocd/trunk@469 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05warnings & comments fixes.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@449 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-03I fixed all the targets even thoughoharboe
I could only prove that XScale was busted. git-svn-id: svn://svn.berlios.de/openocd/trunk@437 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-01fix memory corruption regression introduced in 335oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@424 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29fixed stack corruption. Introduced when _check_value was phased out.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@403 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29- image.c and fileio.c now uses logging to propagate error strings.oharboe
More precise, less code. - removed unused code in fileio.c - Windows should now find debug_handler.bin git-svn-id: svn://svn.berlios.de/openocd/trunk@390 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25- convert all files to unix line-endingdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@347 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25From Michael Bruckoharboe
- bugfix in server.c - removed unused parameter from jtag_add_ir_scan et al. This wasn't necessary in hindsight but anyway. - arm11 source committed but not not in Makefile.am/target.c for now. git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24- added "xscale fast_memory_access" which speeds up memoryoharboe
access by disabling "unecessary" checks. - arm926ejs. Added missing type->mmu and type->virt2phys fn's. for now these are used by working_area when specifying mmu enabled and mmu not enabled address git-svn-id: svn://svn.berlios.de/openocd/trunk@335 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24- fixed target->type->poll() return valueoharboe
- added arch_state to show status of currently selected target - simplified target->type->arch_state() api. - clean up telnet output a bit - fixed GDB output for arch_state - removed a couple of unecessary exit()'s - cleaned up error propagation a bit in a few places git-svn-id: svn://svn.berlios.de/openocd/trunk@332 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-19- Fixed bug in pathmove for XScalentfreak
- added virtual address to working_area. - Improved error messages in a number of places - Added ERROR_COMMAND_SYNTAX_ERROR that commands can return to have syntax printed - Added help for some config commands - Added verification of sw breakpoints with ERROR() message - Removed a couple of exit()'s and replaced with error message - cosmetic fix to armv4_5.c, easier to read - added polymorphic(with default) virt2phys and mmu enable query function to target.h - added virt2phys command that uses target->type->virt2phys() fn Thanks to Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@310 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-18- removed a raft of unecessary exit() calls. Issuing a reset will solve ↵ntfreak
these ails. - now uses jtag_state_pathmove() instead of making assumptions about implementation of jtag_statemove(). - fixed a couple of bugs in timeout handling - removed megabytes of log output when communication is failing. - sleep is now 300ms as documented instead of 3000ms - fixed error path of bulk write - debug_handler can now be issued during normal operation + has help text. Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@304 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-15- fix xscale memory leak and warnings. Thanks Øyvind Harboentfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@297 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-06- added patch to access cp15 register (XScale)mifi
(thanks to Edgar Grimberg for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@283 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-21- Eleminated leading tabs/white spacebodylove
git-svn-id: svn://svn.berlios.de/openocd/trunk@267 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-11- debug handler file not closed - (thanks to oyvind harboe for the patch)ntfreak
- arm_simulate_step called incorrect arm_evaluate_opcode when in thumb mode git-svn-id: svn://svn.berlios.de/openocd/trunk@254 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-07- added gdb flash fixes patch mifi
https://lists.berlios.de/pipermail/openocd-development/2007-December/000548.html - added synthesize in_check_mask/value and error handler patch https://lists.berlios.de/pipermail/openocd-development/2008-January/000554.html (thanks to oyvind harboe for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@248 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-12-10- XScale DebugHandler code is now installed intobodylove
pkglibdir and loaded from there git-svn-id: svn://svn.berlios.de/openocd/trunk@222 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-10-22- add verify_image commandntfreak
- add support for gdb qCRC packet (compare-sections command) git-svn-id: svn://svn.berlios.de/openocd/trunk@210 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-21- correctly initialize start address for XScale trace buffer decodes in ↵drath
fill-once mode git-svn-id: svn://svn.berlios.de/openocd/trunk@202 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-17- renamed "xscale dump_trace_buffer" to "xscale dump_trace" and added code ↵drath
for it git-svn-id: svn://svn.berlios.de/openocd/trunk@198 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-08-10- renamed M5960 USB JTAG to "flyswatter"drath
- make ep93xx and at91rm9200 bitbang JTAG interfaces dependant on ARM host (thanks to Vincent Palatin) - various whitespace fixes - removed various warnings - add support for Debian GNU/kFreeBSD (thanks to Uwe Hermann) - fix OpenOCD compilation for various platforms (thanks to Uwe Hermann and Vincent Palatin) - switched order of JTAG chain examination and validation (examine first, then multiple validation tries even if examination failed) - added target_request subsystem to handle requests from the target (debug messages and tracepoints implemented, future enhancements might include semihosting, all ARM7/9 only for now) - added support for GDB vFlashXXX packets (thanks to Pavel Chromy) - added support for receiving data via ARM7/9 DCC - reworked flash writing. the 'flash write' command is now deprecated and replaced by 'flash write_binary' (old syntax and behaviour) and 'flash write_image' (write image files (bin, hex, elf, s19) to a target). - added support for AMD/ST/SST 29F400B non-cfi flashes git-svn-id: svn://svn.berlios.de/openocd/trunk@190 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-28- fixed endianness helper macros (thanks to obilix and wiml for finding and ↵drath
fixing this bug) - added declarations for 32bit fileio access functions (network byte order) - fixed bug in etm trace dump file handling - added XScale trace buffer decoding - fixed arm_simulator ERROR numbers (-7xx used twice) - fixed minor bug in debug output in stellaris.c git-svn-id: svn://svn.berlios.de/openocd/trunk@178 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-21- added support for Intel/Marvel PXA27x (XScale) targetsdrath
- added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging) - cleaned up errror handlers. only use when there's a catchable error - fix segfault when etm was configured without a valid driver git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-16- added mingw elf patches from Vincent Palatinntfreak
- added str9x programming using flash controller tap (str9xpec), including option bytes and device lock/unlock - inttypes.h now used for long long printf style declarations git-svn-id: svn://svn.berlios.de/openocd/trunk@174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-25- added support for error handlers to JTAG scan commands ↵drath
(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-16- explicitly disable monitor mode on ARM7/9 targetsdrath
- added "prepare_reset_halt()" to target_type_t, which allows reset_halt to be prepared before a reset is asserted, possibly preventing communication with the target - arm7/9 devices now use a breakpoint at 0x0 or reset vector catching for debug out of reset git-svn-id: svn://svn.berlios.de/openocd/trunk@141 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-28- merged XScale branch back into trunkdrath
- fixed some compiler warnigns in amt_jtagaccel.c, bitbang.c, parport.c - free working area and register stuff if str7x block write algorithm failed - check PC after exiting a target algorithm in armv4_5.c git-svn-id: svn://svn.berlios.de/openocd/trunk@135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 09:46:23 +0000