| Age | Commit message (Collapse) | Author |
|---|
|
cortex-a8: Wait for the CPU to be halted/started
With DCCR we are asking the CPU to halt, we should wait until
the CPU has halted before proceeding with the operation.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2638 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Only dap_ap_select when we are going to do a memory access
in the fast reg case.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2636 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
instruction into
the ITR register but it will only be executed when the DSCR[13]
bit is set. The documentation is a bit weird as it classifies
the DSCR as read-only but the pseudo code is writing to it as
well. This is working on a beagleboard.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2634 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Remove the trans_mode change as it is done in the mem_ap_read_atomic_u32 function.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2633 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Before executing a new instruction wait for the previous
instruction to be finished. This comes from the pseudo code
of the cortex a8 trm.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2632 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- add svn props to recently added files armv7a.[ch]
git-svn-id: svn://svn.berlios.de/openocd/trunk@2618 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
previous
nonfunctional cortex_a8 code with something that at least basically
works (for halt/step/resume, without MMU) even if it is incomplete.
(With tweaks from Øyvind, and cleanup from Dave.)
This code has mainly been developed and tested against R1606, it has
been built and tested against R2294 where it runs but step and resume
commands are broken due to regression (which should be fixed now).
This code is really written for OMAP3530. It doesn't identify debug
resources using generic DAP calls to scan the ROM table, or perform
topology detection. The OMAP3530 DAP exposes two memory access ports:
- Port #0 is connected to L3 interconnect (the main bus) with
passthrough to the L4 EMU bus ... so it will be used for most
memory accesses.
- Port #1 is connected to a dedicated debug bus (L4 EMU), with
access to L4 Wakeup, and holds the ROM table ... so it must
be used for most debug and control operations.
The are some defines to handle this in cortex_a8.c, which should be
replaced with more general code. Having access to another Cortex-A8
implementation would help get that right.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2609 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '([ \t]*' with '('.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '\([^_]\)u32' with '\1uint32_t'.
- Replace '^u32' with 'uint32_t'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2279 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '\([^_]\)u16' with '\1uint16_t'.
- Replace '^u16' with 'uint16_t'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2277 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '\([^_]\)u8' with '\1uint8_t'.
- Replace '^u8' with 'uint8_t'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2274 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Move definition of 'struct target_type_s' into new 'target_type.h' file.
- Forward delclaration remains in target.h, with comment pointing to new file.
- Replaces #define with #include in source files.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1971 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Add DEFINE_TARGET_TYPE_S symbol in files that need it defined.
- Forward declare 'struct target_type_s' only, unless that symbol is defined.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1969 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- replace all checks of target->type->examined with target_was_examined().
- replace all setting of target->type->examined with target_set_examined().
- replace clearing of target->type->examined with target_reset_examined().
- add documentation in target_s to warn not to access field directly.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1962 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@1715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@1602 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
