| Age | Commit message (Collapse) | Author |
|---|
|
In target_type.h it's documented that the target must be
halted for add_breakpoint() ... and with slight ambiguity,
also for its add_watchpoint() sibling. So rather than
verifying that constraint in the CPU drivers, do it in the
target_add_{break,watch}point() routines.
Add minor paranoia on the remove_*point() paths too: save
the return value, and print it out in in the LOG_DEBUG message
in case it's nonzero.
Note that with some current cores, like all ARMv7 ones I've
looked at, there's no technical issue preventing watchpoint or
breakpoint add/remove operations on active cores. This model
seems deeply wired into OpenOCD though.
ALSO: the ARM targets were fairly "good" about enforcing that
constraint themselves. The MIPS ones were relied on other code
to catch such stuff, but it's not clear such code existed ...
keep an eye out for new issues on MIPS.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
Several of the sites now using target_type_name() really
ought to be using an instance-specific name. Create a
function called target_name(), accessing the instance's
own (command) name.
Use it in several places that really should be displaying
instance-specific names. Also in several places which
were already doing so, but which had no wrapper to call.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
There are two names that may matter on a per-target basis.
One is a per-instance name (for example, "at91sam7s.cpu").
The other is the name of its type (for example, "arm7tdmi"),
which is shared among multiple targets.
Currently target_get_name() returns the type name, which is
misleading and is rarely appropriate for target diagnostics.
Rename that as target_type_name().
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
It's wrong to map unrecognized failure codes to success.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
Changed some printf format strings..
[dbrownell@users.sourceforge.net: shrink lines, fix indents]
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
Remove misleading typedef and redundant suffix from struct target.
|
|
Remove misleading typedef and redundant suffix from struct breakpoint.
|
|
Remove misleading typedef and redundant suffix from struct watchpoint.
|
|
Fail watchpoint_add() if it's the same address but the
parameters are different ... don't just assume having
the same address means the same watchpoint! (Note that
overlapping watchpoints aren't detected...)
Handle unrecognized return codes more sanely; don't exit()!
And describe command params right.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
files; omitted src/httpd
git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
leakage
git-svn-id: svn://svn.berlios.de/openocd/trunk@2408 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '\s*$' with ''.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2379 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace ')\(==\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace ')\(!=\)\(\w\)' with ') \1 \2'.
- Replace '\(\w\)\(!=\)(' with '\1 \2 ('.
- Replace '\(\w\)\(!=\)\(\w\)' with '\1 \2 \3'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2363 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@2312 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Replace '\([^_]\)u32' with '\1uint32_t'.
- Replace '^u32' with 'uint32_t'.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2279 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- replaces all calls to target->type->{add,remove}_{break,watch}point.
git-svn-id: svn://svn.berlios.de/openocd/trunk@1967 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@1715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@1579 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- fix build warning in cortex_m3
- code cleanup - remove trailing lf and convert c++ comments
git-svn-id: svn://svn.berlios.de/openocd/trunk@1238 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
checks mostly to src/target/target.c
git-svn-id: svn://svn.berlios.de/openocd/trunk@1041 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@912 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
calculated and erased prior to write (flash write_image only)
- corrected array overrun in armv7m.c
- corrected breakpoint memory allocation bug
- image read now uses fgets, vastly improves reading of large files
- improved hex file reading, support for Linear Address Record added
git-svn-id: svn://svn.berlios.de/openocd/trunk@208 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
OpenOCD
git-svn-id: svn://svn.berlios.de/openocd/trunk@189 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- ST STM32x flash support added
- cleaned up armv7m and cortex-m3 support, removed luminary specific code
- cortex-m3 16bit read/write added (required for STM32x flash programming)
git-svn-id: svn://svn.berlios.de/openocd/trunk@177 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
(http://www.joernonline.de/dw/doku.php?id=en:projects:oocdlink)
- fixed breakpoint handling (this changes the target_t interface)
git-svn-id: svn://svn.berlios.de/openocd/trunk@113 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- several small fixes
- retry reading from a FT2232 device on incomplete reads
git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD)
- Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too)
- various fixes
git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
