aboutsummaryrefslogtreecommitdiff
path: root/src/server/gdb_server.c
AgeCommit message (Collapse)Author
2009-05-11Audit and eliminate redundant #include directives from src/server.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@1709 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-19Zach Welch <zw@superlucidity.net> fix -Werror warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-03-18Hiroshi Ito <ito@mlb.co.jp> typosoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1417 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-02-18Holger Schurig <hs4233@mail.mn-solutions.de> fix warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1375 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-01- add gdb pipe support to native win32 (--pipe option)ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@1294 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-16allow setting/reading gdb_port at any timeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1247 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-15- add ability for openocd to communicate to gdb using pipes (stdin/stdout).ntfreak
- this is enabled by new command line option option --pipe. git-svn-id: svn://svn.berlios.de/openocd/trunk@1242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-13- remove target specific variant and use target->variant memberntfreak
- fix build warning in cortex_m3 - code cleanup - remove trailing lf and convert c++ comments git-svn-id: svn://svn.berlios.de/openocd/trunk@1238 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-20- fix issue with gdb_target_to_reg missing second bytentfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@1180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-18big endian fix for GDB. Probably fixes a memory corruption(not reported) as ↵oharboe
well. git-svn-id: svn://svn.berlios.de/openocd/trunk@1174 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-10minor cleanupoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1149 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05fix telnet async messages. retired telnet_async command - no user ↵oharboe
serviceable parts inside. git-svn-id: svn://svn.berlios.de/openocd/trunk@1135 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-24gdb_report_data_abort now ignores all target read errors, including address ↵oharboe
space wraps. Hopefully works around problems in 6.8 git-svn-id: svn://svn.berlios.de/openocd/trunk@1099 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22produce syntax erroroharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1090 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22Laurentiu Cocanu - more help textoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1087 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-14- remove build warningsntfreak
- add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1062 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-14Laurentiu Cocanu - more error handling fixesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1059 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-11Duane Ellis: addresses protocol problems with GDB.oharboe
https://lists.berlios.de/pipermail/openocd-development/2008-October/003326.html git-svn-id: svn://svn.berlios.de/openocd/trunk@1039 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-06Centralize error handling for buggy register handlingoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1019 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-24fix noise in gdb console when single stepping. Remove printing of log before ↵oharboe
processing halted event. git-svn-id: svn://svn.berlios.de/openocd/trunk@994 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-24fixed false positives for keep_alive() not being invoked. oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@993 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-20- added myself to copyright on files i remember adding large contributions ↵ntfreak
for over the years - cleaned up headers to match rest of code - added missing svn props for previously added files git-svn-id: svn://svn.berlios.de/openocd/trunk@987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-01Duane Ellis: "target as an [tcl] object" feature.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@975 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-26do not check checksums in noack caseoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@969 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-24duan ellis target tcl work in progressoharboe
converts a number of 'simple string lookup tables' into NVP tables. These NVP tables will be used by various commands coming in the next patch. git-svn-id: svn://svn.berlios.de/openocd/trunk@962 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-23- clear any existing breakpoints/watchpoints when restarting in gdb extended ↵ntfreak
remote mode git-svn-id: svn://svn.berlios.de/openocd/trunk@960 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-22- add support for new gdb QStartNoAckMode, which disables sending of ack's ↵ntfreak
between remote packets git-svn-id: svn://svn.berlios.de/openocd/trunk@959 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-14typo spotted by spen. gdb_breakpoint_override not tested yet.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@919 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13added global gdb breakpoint override configuration commandoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@914 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13Clear all dangling breakpoints upon GDB connection.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@912 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13return halted signal if step/continue failsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@910 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05Duane Ellis: fix warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25added yours sincerely for files where I feel that I've made non-trivial ↵oharboe
contributions. git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24wait 500ms for target to halt upon connect.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@865 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-23- comment about dummy ack '+' char from gdbntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@864 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-23fix <memory> is missing upon gdb connect warning when no flash is defined ↵oharboe
for target. git-svn-id: svn://svn.berlios.de/openocd/trunk@861 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21restart is a per-target actionoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@853 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21Allows config scripts to override handling of 'R'(restart) GDB packet.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@852 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21- jtag_khz/speed are now single parameter only. These are usedoharboe
from pre/post_reset event scripts. Adding the second parameter was a mistake seen in retrospect. this gives precise control in post_reset for *when* the post reset speed is set. The pre_reset event was added *after* the second parameter to jtag_khz/speed - the target implementations no longer gets involved in the reset mode scheme. Either they reset a target into a halted mode or not. target_process_reset() detects if the reset halt failed or not. - tcl target event names are now target_N_name. Mainly internal at this early stage, but best to get the naming right now. - added hardcoded reset modes from gdb_server.c. I don't know precisely what these defaults should be or if it should be made configurable. Perhaps some hardcoded defaults will do for now and it can be made configurable later. - bugfix in cortex_m3.c for reset_run_and_xxx? - issue syntax error upon obsolete argument in target command instead of printing message that will surely drown in the log git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-08- fix pre_resume script not being calledntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@771 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-06src/helper/configuration.hoharboe
- Log output handlers now get a "const char *line" - Added "const" to parameter. src/helper/command.c src/helper/command.h - New function: 'command_output_text()' - Log output handlers now get a "const char *line" src/helper/options.c - Log output handlers now get a "const char *line" src/server/telnet_server.c - DO not transmit NULL bytes via TELNET. - Log output handlers now get a "const char *line" src/server/gdb_server.c - Log output handlers now get a "const char *line" *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.c *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/target/target.h *** THIS INCLUDES PORTIONS OF A PATCH FROM Oyvind sent previously to the mailing list for TCL users try src/openocd.c - **MAJOR** Work: New TCL/Jim function: mem2array - **MAJOR** Work: Redirect Tcl/Jim stdio output to remote users. - Previously: TCL output did not go to GDB. - Previously: TCL output did not go to TELNET - Previously: TCL output only goes to control console. - This fixes that problem. + Created callbacks: +openocd_jim_fwrite() +openocd_jim_fread() +openocd_jim_vfprintf() +openocd_jim_fflush() +openocd_jim_fgets() src/Makefile.am - New TCL files. - Future note: This should be more automated. As the list of 'tcl' files grows maintaning this list will suck. src/Jim.c - ** THIS INCLUDES A PREVIOUS PATCH I SENT EARLIER ** - that impliments many [format] specifies JIM did not support. - Jim_FormatString() - **MAJOR** work. - Previously only supported "%s" "%d" and "%c" - And what support existed had bugs. - NEW: *MANY* formating parameters are now supported. - TODO: The "precision" specifier is not supported. ** NEW ** This patch. - Jim_StringToWide() test if no conversion occured. - Jim_StringToIndex() test if no conversion occured. - Jim_StringToDouble() test if no conversion occured. ** NEW ** This Patch. Major Work. - Previously output from JIM did not get sent to GDB - Ditto: Output to Telnet session. - Above items are now fixed - By introducing callbacks new function pointers in the "interp" structure. - Helpers that call the callbacks. - New function: Jim_fprintf() - New function: Jim_vfprintf() - New function: Jim_fwrite() - New function: Jim_fread() - New function: Jim_fflush() - New function: Jim_fgets() By default: the output is to STDIO as previous. The "openocd.c" - redirects the output as needed. - Jim_Panic() - Send panic to both STDERR and the interps specified STDERR output as a 2nd choice. - Now JIM's "stdin/stdout/stderr" paramters are "void *" and are no longer "FILE *". src/Jim.h - **MAJOR** - New JIM STDIO callbacks in the "interp" structure. - change: "stdin/stdout/stderr" are now "void *" cookies. - New JIM stdio helper functions. git-svn-id: svn://svn.berlios.de/openocd/trunk@755 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-07This matters for embedded devices, but is probably not observably better for ↵oharboe
PC hosted OpenOCD. git-svn-id: svn://svn.berlios.de/openocd/trunk@647 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-06Edgar Grimberg found tiny memory leakoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@644 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-23regions outside flash are now read/write nocache by default. GDB 6.8 would ↵oharboe
mark non-flash areas as inacessible by default. git-svn-id: svn://svn.berlios.de/openocd/trunk@607 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-18Enabled auto erase, gdb memory map and gdb flash programming by default.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-13More robust handling of unknown target state for step/continue packet.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@573 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11Reset wip. Just adding hooks. This is just to reduce the size of the actual ↵oharboe
change, no change in behaviour. git-svn-id: svn://svn.berlios.de/openocd/trunk@565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-07Spen fixed various issues w.r.t. setting up the sockets for optimal performance.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@545 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-25- rename log functions to stop conflicts under win32 (wingdi)ntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-22- gdb server was incorrectly sending null terminator on qXfer:features:read: ↵ntfreak
packet - armv7m now sends correct gdb register packet git-svn-id: svn://svn.berlios.de/openocd/trunk@522 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-18 19:34:46 +0000