aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Collapse)Author
2008-03-22- changed jtag_add_reset errors to warningsntfreak
- removed extra jtag reset warnings from arm7_9 and cortex_m3 git-svn-id: svn://svn.berlios.de/openocd/trunk@520 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-17- fix warnings during configure cause by ecosboard. default to no, if host ↵drath
cpu isn't arm. - fix generic bitbang code to allow scans to end in Shift-[ID]R - several CFI fixes (thanks to Michael Schwingen): - buffer overflow when converting target code in cfi_intel_write_block - cfi_fix_code_endian needs the number of words, not bytes, as size argument. - Spansion flash write was completely broken on big-endian targets - I borrowed mechanisms from the intel driver, and moved some common code into the cfi_command_val helper function. There is still more common code that might be cleaned up. - the buffer size check in cfi_write was broken for spansion flashes, where cfi_write_words is not implemented. cfi_write_words is no only called if the flash does have a buffer size >1. - "flash info" printed CFI status information for non-CFI flashes, which is confusing. It now only prints those when a real CFI flash is detected. git-svn-id: svn://svn.berlios.de/openocd/trunk@517 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13clarified jtag_khz command.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@513 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13added jtag_khz for use with target libraryoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@512 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13- adds two speeds to jtag_speed. reset and post reset speed. Defaultoharboe
is post reset = reset speed. - removed infinite loop's and exit()'s upon poor arm7/9 communication - cleaned up error messages a bit. Push ERROR() up into fn's that fail and can say something meaningful about what failed. git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13marked infinite loop in code w/TODO and fixed warning.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@508 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-12Dominic undid some of my damage. CLK should now be set as intended in all cases.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@507 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-12The bitbang driver leaves the TCK 0 when in idleoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@505 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-12This moves common code into functions so as to make it clear oharboe
that all the jtag_add_xxx() are indeed intended to do the same thing. git-svn-id: svn://svn.berlios.de/openocd/trunk@504 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11reduce compare noise. If someone should be crazy enough to try to run ↵oharboe
OpenOCD under eCos, then they'v got some hooks to point them in the general direction. git-svn-id: svn://svn.berlios.de/openocd/trunk@499 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11- retired unused jtag events. The code was incorrectoharboe
- hopefully clarified the difference between TRST and TMS reset. - added DEBUG() statements w.r.t. state changes - TRST released and moving out of TAP_TLR are completely different events. Only TRST released has a DEBUG() statement git-svn-id: svn://svn.berlios.de/openocd/trunk@496 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11JTAG_END_STATE is now retired. It is no longer queued.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@493 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11- fixed jtag_add_reset(). It no longer causes jtag_execute_queue() tooharboe
fail for two of it's return codes. A little bit weird, but compatible with existing codebase. - tightend up error handling. Since the jtag_xxx() is a queue that is either executed as things are added(hw queue) or a software queue, then errors can only be caught during jtag_execute_queue(). No error code is therefore returned from the queuing fn's. git-svn-id: svn://svn.berlios.de/openocd/trunk@492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-10backed out changes from 483.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@490 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-10Pavel Chromy: the attached patch refines PRESTO support and makes it work ↵oharboe
with libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@486 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-10- the jtag chain is examined and validated after GDB & telnet serversoharboe
are up and running. The examination and validation is actually "optional" from the point of view of GDB + telnet servers. Multiple targets should work fine with this. - jtag_speed is dropped(divisor is increased), if jtag examination and validation fails. - the chain is validated 10x to catch the worst jtag_speed offences - added LOG_SILENT that can be used to shut up log. Feeble ersatz for try+catch. - GDB register packets are now always replied in order to make sure that GDB connect works. If the target is not halted, then these packets contain dummy values. git-svn-id: svn://svn.berlios.de/openocd/trunk@483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-07Michael Bruck: fixed warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@471 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-07Pavel Chromy, the patch fixes an issue with PRESTO & FTD2XX under Linux.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@466 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-06tms is never referenced, confusing old code left behind probably.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@456 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-06comment.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-06make debug code w.r.t. incorrect args for bypass stricter.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@450 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05- This speeds up dcc arm7_9 bulk write a little bit and exercises the ↵oharboe
jtag_add_dr_out() codepath - added a check to jtag_add_pathmove() for legal path transitions - tweaked jtag.h docs a little bit - made some jtag bypass tests _DEBUG_JTAG_IO_ git-svn-id: svn://svn.berlios.de/openocd/trunk@448 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05added jtag_add_dr_out(). Better for hw fifo, same for software fifo.oharboe
Passes 94kBytes/s regression test. Works with str912, which relies on bypass git-svn-id: svn://svn.berlios.de/openocd/trunk@447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-02Uwe Hermann tightned up comments, etc. to follow OpenOCD policyoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@431 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-01wip. fixed gaffe in jtag_add_shift()oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@409 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-01error handling fix.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@405 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-29Uwe Hermann: oharboe
Small cosmetic fixes in the license header to make them all look the same, fix some typos, update README. git-svn-id: svn://svn.berlios.de/openocd/trunk@396 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28fix gaffe.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@375 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28fix from Pavel Chromy oharboe
this patch fixes an issue in jtag_init - shall not reset jtag to NULL. This causes jtag interface (USB device) not to be closed properly if jtag chain validation fails. Once the underlaying jtag interface is initialized, jtag pointer shall be left untouched, even in case of an error, so that proper cleanup can be done, see exit_handler in openocd.c git-svn-id: svn://svn.berlios.de/openocd/trunk@372 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28jtag_add_shift() fn - minidriver work in progress.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@367 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28- fix line-endingsdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@362 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28Uwe Hermann fixed some warnings.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@360 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-27- fix typo in ep93xx jtag driver to allow OpenOCD compilation on ARM (thanks ↵drath
to Uwe Hermann for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@358 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-27- fix bug in ft2232 pathmove (thanks to Michael Bruck for the patch)drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@357 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26fix naming conflict under Windows.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@353 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26oopss.. another jtag minidriver reset gaffe.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@352 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26jtag_add_reset() minidriver gaffe fixed.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@351 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26Next step in the JTAG minidriver. This should be fairly close to the final ↵oharboe
thing, but I'm not calling it "done" quite yet. git-svn-id: svn://svn.berlios.de/openocd/trunk@350 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26- jtag minidriver work in progressoharboe
- svn:eol-style=native. Let's see how that works out :-) git-svn-id: svn://svn.berlios.de/openocd/trunk@349 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25- remove build warningsntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@348 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25- convert all files to unix line-endingdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@347 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25formatting.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@345 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25Pavel Chromy style fixes.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@344 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25Fix from Pavel Chromy.oharboe
https://lists.berlios.de/pipermail/openocd-development/2008-February/001018.html git-svn-id: svn://svn.berlios.de/openocd/trunk@343 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25From Michael Bruckoharboe
- bugfix in server.c - removed unused parameter from jtag_add_ir_scan et al. This wasn't necessary in hindsight but anyway. - arm11 source committed but not not in Makefile.am/target.c for now. git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25- using ERROR_COMMAND_SYNTAX_ERROR to print syntax in a couple of placesoharboe
- some more flash cleanup of checking halted state - moved output handler into options.c - very slightly tweaked server.c to make it a bit more compatible with eCos - retired arch_state. Not quite sure how I managed to leave that out last time. git-svn-id: svn://svn.berlios.de/openocd/trunk@338 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24- concretize JTAG state transition rules (previously implied behaviour is ↵drath
now documented) git-svn-id: svn://svn.berlios.de/openocd/trunk@329 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24sharpend JTAG docs w.r.t. hw fifo implementations and retired ↵oharboe
jtag_cancel_queue() which is inheritely incompatible with a hw fifo concept. git-svn-id: svn://svn.berlios.de/openocd/trunk@328 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24cosmetic fixes to debug output + phasing out printf() in favour of logging ↵oharboe
system. From Pavel Chromy <chromy@asix.cz> git-svn-id: svn://svn.berlios.de/openocd/trunk@326 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-18- fix broken JTAG error handlingntfreak
- Allow all commands to be executed during config stage - Help now works for config commands - make var args handling follow the rules more closely Thanks Øyvind Harboe git-svn-id: svn://svn.berlios.de/openocd/trunk@305 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 09:49:51 +0000