aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Collapse)Author
2008-11-05926ejs target uses rclk. Cleaned up jtag_khz output a bit.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-05disable continous polling while srst is asserted and power dropout is detectedoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-11-03- fix issue with jlink/libusb timeout under linuxntfreak
- add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1128 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-22Laurentiu Cocanu - more help textoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1087 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-15Laurentiu Cocanu - memory read/write and exit() error path fixesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1064 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-10-05Georg Acher <acher@in.tum.de> corrected TDO samplingoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1016 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-27- convert spaces to tabs in at91sam7.[ch]ntfreak
- add missing svn props git-svn-id: svn://svn.berlios.de/openocd/trunk@1009 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-25ZY1000 codeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1005 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-20- added myself to copyright on files i remember adding large contributions ↵ntfreak
for over the years - cleaned up headers to match rest of code - added missing svn props for previously added files git-svn-id: svn://svn.berlios.de/openocd/trunk@987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-09-12Duane Ellis: target_process_reset is now implemented in tcl. This allows ↵oharboe
better control from target configuration scripts. git-svn-id: svn://svn.berlios.de/openocd/trunk@984 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-27comment about slow RTCKoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@972 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-25RCLK is not supported, return error instead of crashing.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@968 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-20continue execution even if chain can't be validated. This will, hopefully, ↵oharboe
give us some more feedback on what's wrong. git-svn-id: svn://svn.berlios.de/openocd/trunk@953 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-20- added missing parport configs to texintfreak
- remove spaces from last patch git-svn-id: svn://svn.berlios.de/openocd/trunk@951 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-20duane ellis: fix warningoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@948 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-19DANGER: committed work-in-progress to handle examination of jtag devices ↵oharboe
without IDCODE. I think this works, but I may have to pull that change out again... added alive_sleep() to avoid warnings when resetting target(fixes incomprehensible error timeout error messages in GDB). git-svn-id: svn://svn.berlios.de/openocd/trunk@941 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-19Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> one more parport ↵oharboe
device git-svn-id: svn://svn.berlios.de/openocd/trunk@930 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-13fix warning.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@911 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-11fix output from jtag_khz when only jtag_speed has been invokedoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@908 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-11fix error messageoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@904 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-06- fix target_examine declarationntfreak
- remove build warnings - added --enable-gccwarnings to docs - update mips_m4k_examine function git-svn-id: svn://svn.berlios.de/openocd/trunk@893 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05Duane Ellis: fix warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-04TAP_TLR won't work in a pathmove sequence. OpenOCD shouldn't and doesn't ↵oharboe
need to support this. git-svn-id: svn://svn.berlios.de/openocd/trunk@886 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-30warning output upon connection problems.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@882 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-29more jtag_examine() checks. catch errors during first 640 bits.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@881 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25added yours sincerely for files where I feel that I've made non-trivial ↵oharboe
contributions. git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24take path to eCos files from environment variableoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@869 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-24allow jtag minidriver access to cmd_queue_cur_state for jtag_add_pathmove()oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@867 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-23- fix typo in jtag_add_end_statentfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@863 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21- jtag_khz/speed are now single parameter only. These are usedoharboe
from pre/post_reset event scripts. Adding the second parameter was a mistake seen in retrospect. this gives precise control in post_reset for *when* the post reset speed is set. The pre_reset event was added *after* the second parameter to jtag_khz/speed - the target implementations no longer gets involved in the reset mode scheme. Either they reset a target into a halted mode or not. target_process_reset() detects if the reset halt failed or not. - tcl target event names are now target_N_name. Mainly internal at this early stage, but best to get the naming right now. - added hardcoded reset modes from gdb_server.c. I don't know precisely what these defaults should be or if it should be made configurable. Perhaps some hardcoded defaults will do for now and it can be made configurable later. - bugfix in cortex_m3.c for reset_run_and_xxx? - issue syntax error upon obsolete argument in target command instead of printing message that will surely drown in the log git-svn-id: svn://svn.berlios.de/openocd/trunk@849 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18- fix incorrectly registered function openocd_array2memntfreak
- removed unused variables - reformatted lpc288x.[ch] - fixed helper/Makefile.am dependencies - add correct svn props to added files git-svn-id: svn://svn.berlios.de/openocd/trunk@829 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18keep_alive() fix for reset warnings.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@827 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18Charles Hardin <ckhardin@gmail.com> move tcl stuff nearer to where it belongs.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11Charles Hardin ckhardin at gmail.com oharboe
This address the >32 bit problem with drscan also added a check for bypass in the execute since this will manifest itself as a memory corruption when this check helps to debug the problem alot easier git-svn-id: svn://svn.berlios.de/openocd/trunk@794 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11- retired variable stuff. oharboe
- drscan is now a low level tcl command: execute DR scan <device> <num_bits> <value> <num_bits1> <value2> - removed obsolete partial command text support git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-18Pavel Chromy:oharboe
- TAP reset without TRST shall be called TLR (stands for test-logic-reset, named after the TAP state it ends is) rather than tms (test-mode-select) - some comments changed to /* C coding style */ git-svn-id: svn://svn.berlios.de/openocd/trunk@717 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-18Pavel Chromy:oharboe
- lower jtag speeds (higher divisor) was used, TDI was not changed on falling TCK edge as it should - reset signal was release upon any TMS transition, making it impossible to use reset halt - added khz() and speed_div() functions git-svn-id: svn://svn.berlios.de/openocd/trunk@716 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-18Pavel Chromy: TAP state changed to TLR when SRST goes active with ↵oharboe
srst_pulls_trst, as in all other drivers git-svn-id: svn://svn.berlios.de/openocd/trunk@715 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-10- error message cleanup in jlink driverntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@707 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-04Pavel Chromy: TCK returns to zero before state of reset line is changed.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@703 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-04Pavel Chromy: fix logging syntax error + formatting & removing obsolete ↵oharboe
comments. git-svn-id: svn://svn.berlios.de/openocd/trunk@702 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-06-04- fix jlink accessing incorrect buffer elementntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@701 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-27- fix issue if jlink sends result in single usb in packetntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@691 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-26- added check for max. value of jtag_speed in ft2232_khz.mifi
git-svn-id: svn://svn.berlios.de/openocd/trunk@690 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-26- renamed EMU_CMD_HW_JTAG to EMU_CMD_HW_JTAG3mifi
git-svn-id: svn://svn.berlios.de/openocd/trunk@689 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-26found out why str912 reset halt failed.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@688 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-26clock 1/0 in idle now configurable.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@687 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-25- changed some buffer defines to increase performancemifi
git-svn-id: svn://svn.berlios.de/openocd/trunk@685 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-24- comment out usb_set_altinterface, because it is not working under Mac OS X.mifi
And not needed for Windows. Hopefully it will not break a Linux build. git-svn-id: svn://svn.berlios.de/openocd/trunk@684 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-24- swap processing of reset handling. First srst and than trst.mifi
git-svn-id: svn://svn.berlios.de/openocd/trunk@680 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 03:36:21 +0000