aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Expand)Author
2014-09-29vsllink: improve the performance when using swdSimon Qian
2014-09-22mpsse: Display libusb error names instead of numbersJoakim Gebart
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
2014-09-15jtag: drivers: stlink: remove unnecessary '\n' in LOG_* entriesAndrey Skvortsov
2014-09-08jtag/drivers/libusb0_common: fix FTBFS (libusb_device_descriptor error)Paul Fertser
2014-08-22jtag: always configure enabled tap parameter appropriatelyPaul Fertser
2014-08-19jtag/drivers/ftdi: Use adapter_khz value for initial clock speed (was default...Angus Gratton
2014-08-19jlink: Constantify string arraysSpencer Oliver
2014-08-19jlink: add variant "J-Link Lite-ADI"Spencer Oliver
2014-08-19jlink: fix typoSpencer Oliver
2014-08-19jtag: usb_blaster: fix initialization regressionRobert Jarzmik
2014-08-11stlink_usb: Fix swallowed error on read/write operations, add retries on SWD ...Angus Gratton
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser
2014-08-11newdap: Ignore -irlen/-irmask/etc newdap params on SWD or CMSIS-DAPAngus Gratton
2014-08-02drivers/jlink: Revert old workaroundAndreas Fritiofson
2014-08-02drivers/jlink: fix SWD speed config, and set it before sending anythingPaul Fertser
2014-08-02drivers/jtag/jlink: support SWD modePaul Fertser
2014-07-10drivers/cmsis_dap_usb: Return with ERROR_FAIL if no CMSIS-DAP device is found.Masaki Muranaka
2014-07-03vsllink: Port to libusb-1.0 APIFatih Aşıcı
2014-07-03vsllink: Add SWD supportFatih Aşıcı
2014-07-03jtag/drivers/opendous: remove ftime() callsPaul Fertser
2014-07-03drivers/cmsis_dap_usb: restructure init sequence a bitPaul Fertser
2014-07-03jtag/drivers/cmsis_dap: fix check for hardcoded vids/pidsPaul Fertser
2014-06-28jtag/drivers/ftdi: do not touch unavailable reset signalsPaul Fertser
2014-06-28jtag/drivers/ftdi: require defining SWD_EN signal for SWD modePaul Fertser
2014-06-28jtag/drivers/ftdi: declare standard JTAG signals on SWD initPaul Fertser
2014-06-28jtag/drivers/ftdi: add option to declare signal aliasesPaul Fertser
2014-06-28Auto-select JTAG transport when appropriatePaul Fertser
2014-06-28Relax polling check if not in JTAG modeAndreas Fritiofson
2014-06-28Add FTDI SWD driverAndreas Fritiofson
2014-06-28transport: Constify the transports vectorAndreas Fritiofson
2014-06-28swd: Add frequency setting and special/switching sequences to the APIAndreas Fritiofson
2014-06-28swd: Remove support for turnaround periods other than 1Andreas Fritiofson
2014-06-28swd: Fix park bit polarity according to ADIv5.1 SupplementAndreas Fritiofson
2014-06-28swd: Convert API to asynchronousAndreas Fritiofson
2014-06-28drivers/cmsis_dap_usb: remove jtag reset hacksPaul Fertser
2014-06-28tcl: introduce using_(jtag|swd|hla) helpers and use them in reset handlerPaul Fertser
2014-06-28swd: Improve parity calculation and move it to types.hAndreas Fritiofson
2014-06-28adi_v5: Remove unused features of the DAP and SWD interfacesAndreas Fritiofson
2014-06-28adi_v5_swd: Improve SWD supportFatih Aşıcı
2014-06-22jtag/drivers/jlink: better diagnostics for RCLK problemsPaul Fertser
2014-06-01jtag/drivers/osbdm: downgrade init message severity, fix wordingPaul Fertser
2014-06-01jtag/drivers/stlink: allow to reconnect seamlessly after polling failurePaul Fertser
2014-05-09ftdi: Optimize GPIO togglingAndreas Fritiofson
2014-04-14usb_blaster: fix warning: array subscript has type ‘char’Spencer Oliver
2014-04-14jtag/drivers/remote_bitbang: use sizeof to determine maximum unix socket path...Paul Fertser
2014-04-14parport: add "aspo" hotpluggable adapter configKarl Hammar
2014-04-14Makefile.am: fix build for libftdi1, pass CFLAGS where appropriatePaul Fertser
2014-04-08jtag/aice/aice_usb: remove unused constantsPaul Fertser
2014-03-30Don't cast return value of [cm]allocAndreas Fritiofson
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 07:39:17 +0000