aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Collapse)Author
2009-09-11tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe
tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-09- Fix bug-in-waiting when adding more than one TAP event typeoharboe
- Infinite loop bugfix when running tap configure a second time git-svn-id: svn://svn.berlios.de/openocd/trunk@2681 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26David Brownell <david-b@pacbell.net> Fix segv in jtag_examine_chain(): exit ↵oharboe
loop on no-tap. Keep "next iteration" step with the rest of the loop overhead. Cleanup: remove spurious whitespace, and an overlong line; only assign "tap->hasidcode" once. git-svn-id: svn://svn.berlios.de/openocd/trunk@2631 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26added missing check on jtag_executeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2630 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26reduce arm11 output noiseoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe
Unify the handling of the req_srst parameter, and rip out a large NOP branch and its associated FIXME. (There didn't seem to be anything that needs fixing; but that was unclear since the constraints were scattered all over the place not unified.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2623 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe
Unify the handling of the req_tlr_or_trst parameter. Basically, JTAG TMS+TCK ops ("TLR") is always used ... unless TRST is a safe option in this system configuration. git-svn-id: svn://svn.berlios.de/openocd/trunk@2622 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> Some jtag_add_reset() cleanup:oharboe
- Track whether TRST and/or SRST actually change: * If they're not changing, don't ask the JTAG adapter to do anything! (JTAG TCK/TMS ops might still be used to enter TAP_RESET though.) * Don't change their recorded values until after the adapter says it did so ... so fault paths can't leave corrupt state. * Detect and report jtag_execute_queue() failure mode * Only emit messages saying what really changed; this includes adding an omitted "deasserted TRST" message. * Only apply delays after deasserting SRST/TRST if we *DID* deassert! - Messages say "TLR" not "RESET", to be less confusing; there are many kinds of reset. (Though "TLR" isn't quite ideal either, since it's the name of the TAP state being entered by TMS+TCK or TRST; it's at least non-ambiguous in context.) So the main effect is to do only the work this routine was told to do; and to have debug messaging make more sense. git-svn-id: svn://svn.berlios.de/openocd/trunk@2621 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-24Steve Grubb <sgrubb@redhat.com> fix various and sundry leaksoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2606 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-24Jonas Horberg <jhorberg@sauer-danfoss.com> oharboe
The trunk is currently broken for interfaces without the speed_div function (interface specific clock speed value to kHz conversion). Example: parport. git-svn-id: svn://svn.berlios.de/openocd/trunk@2605 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-20- remove enable-ft2232-highspeed configure option, high speed ftdi support ↵ntfreak
is now detected during the configure stage - warning now issued if high speed ftdi device found and openocd was built using an old driver git-svn-id: svn://svn.berlios.de/openocd/trunk@2599 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-19Jonas Horberg [jhorberg@sauer-danfoss.com]:ntfreak
Fix small typo in ftd2xx type detection git-svn-id: svn://svn.berlios.de/openocd/trunk@2597 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18Jonas Horberg [jhorberg@sauer-danfoss.com]ntfreak
https://lists.berlios.de/pipermail/openocd-development/2009-August/009939.html 1. It can only be built with the FTD2XX driver. libftdi supports FT2232H/FT4232H since version 0.16 2. A speed value of 0 is used as a RTCK request indicator. This clashes with the valid clock division value 0 that provide the highest fixed clock frequency. 3. The ft2232_speed_div function return the maximum selectable frequency (30MHz) when RTCK is activated. It should return 0. 4. The ft2232_khz function return ERROR_OK when RTCK is requested even for devices lacking RTCK support. It should return ERROR_FAIL so the upper driver layers can detect this and try to fallback to a fixed frequency. 5. FT2232H/FT4232H have a backward compatibility function that divide the clock by 5 to get the same frequency range as FT2232D. There is no code that disable this functionality. I can not find anything about if this is enabled or disabled by default. I think it is safest to actively disable it. git-svn-id: svn://svn.berlios.de/openocd/trunk@2591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18Jonas Horberg [jhorberg@sauer-danfoss.com]ntfreak
Change jtag_rclk behaviour so it can be called before the interface init function git-svn-id: svn://svn.berlios.de/openocd/trunk@2590 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-07David Brownell <david-b@pacbell.net>:ntfreak
Warn about anyone using "jtag_speed" commands; that command is obsolete, and will someday be removed. git-svn-id: svn://svn.berlios.de/openocd/trunk@2578 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-06Gary Carlson [gcarlson@carlson-minot.com]:ntfreak
- revert patch from rev1507 as it was causing reset issues with arm9 cores git-svn-id: svn://svn.berlios.de/openocd/trunk@2574 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-23Ferdinand Postema <ferdinand@postema.eu> fix cygwin warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2559 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-17Andreas Fritiofson <andreas.fritiofson@gmail.com> UTF8 fixesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2549 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-15print errno when parport fails to open.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2529 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-141.54 snapshotoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2523 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-13Gary Carlson <gcarlson@carlson-minot.com>ntfreak
Spencer Oliver <spen@spen-soft.co.uk> - fix jlink win32/linux/darwin startup issues - see https://lists.berlios.de/pipermail/openocd-development/2009-July/009438.html git-svn-id: svn://svn.berlios.de/openocd/trunk@2513 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-11Simple warning fixduane
git-svn-id: svn://svn.berlios.de/openocd/trunk@2507 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-07fix return value for "reset" and "runtest" command. Found by code inspection.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2488 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06- change sleep to usleep - fixes issue under win32 buildntfreak
git-svn-id: svn://svn.berlios.de/openocd/trunk@2483 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06revert svn 1679 - fixes cp15 read/write timeout. Single stepping still broken.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2477 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06Ferdinand Postema <ferdinand@postema.eu>:zwelch
Updates to private TAP state tables in amtjtagaccel interface driver. The first change is the neccesary one to correct a long-standing bug that caused the IDCODE to be shifted by one bit too many. This was caused by an incorrect path from state RESET to state DRSHIFT. The value of those 2 bytes were 0x8a and 0x04. This means that the bitstream to do this transition is 0b 00100 01010 (send LSB first). This will bring you from the reset state to the shift state; however, you enter the shift-state twice, which explains why the ID-CODE that will be read next will be shifted 1 bit. The fix changes these to 0x05 and 0x00. This will send the bitstream 0b 00101 (send LSB first). This will bring the TAP controller from the RESET state to the DRSHIFT state directly, without entering the DRSHIFT state twice. After checking the whole table, two other transitions were found that could be optimized (5 bits in stead of 10 bits). Summary off all changes: From To Old values Old Bitstream New values New Bitstream Remarks ---- ------- ---------- ------------- ---------- ------------- ------- RESET DRSHIFT 0x8a 0x04 0b00100 01010 0x05 0x00 0b00101 1,2 IDLE DRSHIFT 0x85 0x08 0b01000 00101 0x04 0x00 0b00100 2 IDLE IRSHIFT 0x8b 0x08 0b01000 01011 0x06 0x00 0b00110 2 [1] Fixes the IDCODE bug [2] Optimization git-svn-id: svn://svn.berlios.de/openocd/trunk@2472 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-06Gary Carlson <gcarlson@carlson-minot.com>:zwelch
Fix intermittent J-Link interface startup failures: - Use usb_reset to ensure selected dongle is in known good state. - Assert emulator reset durning status check to prevent supurious failures. - Eliminate status check loop; not needed due to other fixes. git-svn-id: svn://svn.berlios.de/openocd/trunk@2471 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02Fix FTD2XX build for CygWin.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2454 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-02zy1000 1.53 snapshotoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2451 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Marcel Jost <marcel.jost@bfh.ch>:zwelch
This patch adds support for the Luminary Micro LM3S9B90 target and LM3S9B92 Evaluation Kit. These kits include a new ft2232 adapter, the Luminary In-Circuit Debug Interface (ICDI) Board, so this is added as a new ft2232 layout called "luminary_icdi". git-svn-id: svn://svn.berlios.de/openocd/trunk@2429 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30David Brownell <david-b@pacbell.net>:zwelch
Add "jtag names" command, mirroring "target names" but returning TAP names instead of target names. This starts letting TAPs be manipulated in scripts ... much like what works now for targets. It's a bit limited just yet, since "jtag cget $TAPNAME" doesn't expose all TAP attributes. "$TARGETNAME cget" is more functional. git-svn-id: svn://svn.berlios.de/openocd/trunk@2428 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Fix doxygen warning in jtag.h caused by a changed parameter name.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2424 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-30Fix @file documentation blocks in new interfaces source files.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2422 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29David Brownell <david-b@pacbell.net>:zwelch
Warn when people (or scripts) use numeric identifiers for TAPs, instead of dotted.name values. We want this usage to go away, so that for example adding more TAPs doesn't cause config scripts to break because some sequence number changed. It's been deprecated since late 2008, but putting a warning on this should help us remove it (say, in June 2010) by helping to phase out old (ab)usage in config scripts. Other than in various config files, the only code expecting such a number was the almost unused str9xpec driver. This code was changed to use the TAP it was passed, instead of making its own dubious lookup and ignoring that TAP. git-svn-id: svn://svn.berlios.de/openocd/trunk@2415 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29Move JTAG interface list to new files.zwelch
- Adds new source files to encapsulate static/dynamic module handling. - Further work should implement the jtag_interface_modules_load routine, to populate the jtag_interfaces list from shared libraries in a path. git-svn-id: svn://svn.berlios.de/openocd/trunk@2413 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-26zy1000 rev C workoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2405 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace at end of lines, step 2.zwelch
- Replace '\s*$' with ''. git-svn-id: svn://svn.berlios.de/openocd/trunk@2380 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Replace '){' with ') {'.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2378 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs before ')'.zwelch
- Replace '[ \t]*[)]' with ')'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2377 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs after '('.zwelch
- Replace '([ \t]*' with '('. git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '[<>]' whitespacezwelch
- Replace ')\([<>]\)(' with ') \1 ('. - Replace ')\([<>]\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\([<>]\)(' with '\1 \2 ('. - Replace '\(\w\)\([<>]\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2375 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '[|]' whitespacezwelch
- Replace ')\([|]\)(' with ') \1 ('. - Replace ')\([|]\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\([|]\)(' with '\1 \2 ('. - Replace '\(\w\)\([|]\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2374 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '+' whitespacezwelch
- Replace ')\(+\)(' with ') \1 ('. - Replace ')\(+\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(+\)(' with '\1 \2 ('. - Replace '\(\w\)\(+\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2373 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '=' whitespacezwelch
- Replace ')\(=\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(=\)(' with '\1 \2 ('. - Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2372 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '==' whitespacezwelch
- Replace ')\(==\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '<<' whitespacezwelch
- Replace ')\(<<\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(<<\)(' with '\1 \2 ('. - Replace '\(\w\)\(<<\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2370 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '>>' whitespacezwelch
- Replace ')\(>>\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(>>\)(' with '\1 \2 ('. - Replace '\(\w\)\(>>\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2369 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '<=' whitespacezwelch
- Replace '\(\w\)\(<=\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2368 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '>=' whitespacezwelch
- Replace ')\(>=\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(>=\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2367 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '&&' whitespacezwelch
- Replace ')\(&&\)(' with ') \1 ('. - Replace '\(\w\)\(&&\)(' with '\1 \2 ('. - Replace '\(\w\)\(&&\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2366 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 03:38:49 +0000