aboutsummaryrefslogtreecommitdiff
path: root/src/jtag
AgeCommit message (Collapse)Author
2013-07-01Allow autoscan up to 64 bit IR lengthsAndreas Fritiofson
Change-Id: Ib15ff67b57606fe6c7997f3f9bd90e096acd5f3d Signed-off-by: Evan Hunter <ehunter@broadcom.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/832 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01Add support for 64 bit parameter to irscanEvan Hunter
Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/831 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-29drivers/jtag: usb_blaster add pin controlsRobert Jarzmik
Add pin controls (pin6 and pin8). These pins can be controled either : - with a fixed value (0 or 1) - by TRST or SRST reset signal (driven low when signal activated). Change-Id: Ie6a3e57fc6ba6a38fdb9a009c976e3febab8f578 Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Reviewed-on: http://openocd.zylin.com/1448 Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Tested-by: jenkins
2013-06-21Bus Pirate driver: Small assorted fixes.R. Diez
Fixes are: - Discard any stale data from the previous connection. - Disable CR/LF translation on the (virtual USB) serial port. - Increase the average USB packet size. The 1 KiB buffer was underutilised. - Option "buspirate_speed fast" now works out of the box. - Some extra comments, error checking, etc. Change-Id: I72c49d943a8ce9c5e5d1644ef90cb1482f93c618 Signed-off-by: R. Diez <rdiezmail-openocd@yahoo.de> Reviewed-on: http://openocd.zylin.com/1437 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12configure: remove --enable-libusb0 option, rework libusb selectionPaul Fertser
This makes libusb handling more consistent: if any driver requires libusb, first check for libusb-1 availability, if not found and libusb0 is ok for this case, try libusb0. A user-visible bug fixed by this is that when a user was selecting a driver that required libusb-1 but was lacking the necessary dev files or libraries, configure didn't complain (but the build was failing of course). --enable-stlink doesn't really require libusb-1 but since it's using the same automake symbol HLAADAPTER, ti_icdi is getting built too which needs libusb1 unconditionally. Since using libusb-0.1 makes little sense anyway, leave that as is. Signed-off-by: Paul Fertser <fercerpav@gmail.com> Change-Id: I630a4ad9e4583743d45b2233bf5d8f4e5c0aab82 Reviewed-on: http://openocd.zylin.com/1434 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-12libusb1_common, ftdi: clarify libusb_open error messagePaul Fertser
Print a user-friendly message when libusb_open() fails, e.g. Error: libusb_open() failed with LIBUSB_ERROR_ACCESS when there's a permissions problem. Also output a configure warning if libusb older than 1.0.9 is detected. Change-Id: I800f71f06672fe06c0a98a4e469f853b5021bcfe Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1430 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-10build: fix incorrect GPL address from last commitSpencer Oliver
962b3eb40cc5b69d9b3d6fcc4c5d56c4d204a307 included the old GPL address. Change-Id: I7affbdc3fc1c9251ea90796ab9eeef4d56ba4308 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1440 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-10Add BCM2835 (as found in Raspberry Pi) interface driverPaul Fertser
This adds support for JTAG programming by bitbanging GPIOs exposed on the RaspberryPi's expansion header. Tested by connecting directly to an STM32VLDiscovery board, without any additional circuity. I observed maximum about 4MHz on the TCK pin with an old analogue 'scope and about 100kHz when setting the speed to 100kHz. Busyloop waiting is needed because even with a single 0ns nanosleep call (with FIFO priority) it lowers the TCK speed to ~30kHz which is way too low to be useful. The speed testing with adapter_khz 2000 gave the following results: sudo chrt -f 1 nice -n -19 ./src/openocd \ -f interface/raspberrypi-native.cfg \ -c "set WORKAREASIZE 0x2000" \ -f target/stm32f1x.cfg -c "adapter_khz 2000" wrote 131072 bytes from file random.bin in 3.973677s (32.212 KiB/s) dumped 131072 bytes in 1.445699s (88.538 KiB/s) This is 3.7 times faster for writing and 14.3 times faster for reading compared to the generic sysfsgpio driver; probably the writing speed is limited by the target itself here and reading speed might be considerably higher too with appropriate connection and a capable target. BCM2835 name is choosen over BCM2708 because the published peripherals datasheet uses the particular model name and not family name. Change-Id: Ib78168be27f53c2a3c88c3dd8154d1190c318c78 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/758 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-06-05Added OpenJTAG DriverRyan Corbin
Updated OpenJTAG driver from www.openjtag.org to work with latest version of OpenOCD. Change-Id: I2917f4e5835fb9ca5265e81dc38515fa97ae9503 Signed-off-by: Ryan Corbin <corbin.ryan@gmail.com> Reviewed-on: http://openocd.zylin.com/1406 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05aice: add Andes AICE supportHsiangkai Wang
Andes AICE uses USB to transfer packets between OpenOCD and AICE. It uses high-level USB commands to control targets instead of using JTAG signals. I define an interface as aice_port_api_s. It contains all basic operations needed by target-dependent code. Change-Id: I117bc4f938fab2732e44c509ea68b30172d6fdb9 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1256 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-04drivers/jtag: rewrite usb_blaster driverRobert Jarzmik
Rewrite the Altera USB Blaster dongle driver : - make extensive use of byte-shift mode, to improve JTAG speed. This is the main reason of the rewrite. It improves the memory dumps with a factor 3 at least, and upload 100 times, from 1 kBytes/sec to 100 kBytes/sec with a USB-Blaster connected to an Altera Virtual JTAG TAP + OpenRISC CPU. - split the low level API part (between FTDI and FTD2xx) from core driver, so that in the future, if both libftdi and ftd2xx can coexist, the driver will be able to switch dynamically from one access to the other. Change-Id: I2ee9cedf4a5eb27501f337993ee0cdee52517e7c Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Marek Czerski <ma.czerski@gmail.com> Tested-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/467 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Alexandre Becoulet <alexandre.becoulet@free.fr> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-03rlink: fix speed table generationPaul Fertser
The speed table generation (by using explicit make -f Makefile.rlink) was broken since 865efd828a267992db0f2a92a731c5ce23a34236 Dec 2 2009 which did a bunch of renaming and included hand-editing of a generated rlink_speed_table.c file. This patch is compile-tested, i.e. the new generated rlink_speed_table.c links fine with the rlink driver. Change-Id: I1789a2f2f5bf20183b772d55c55fe68a0bd05cf5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1431 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: De-duplicate init code and clean up on errorAndreas Fritiofson
Change-Id: I8be413a9e1683f96f835232f9ff25d9bd42099de Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1380 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-10remote_bitbang: Convert to use getaddrinfo()Andreas Fritiofson
Since gethostbyname() is deprecated and inconvenient, rewrite to use getaddrinfo() using an implementation more or less copied from its man page. This automatically enables support for IPv6. This also fixes a FTBFS on ARM due to alignment issues. Change-Id: I990a49506cac4b26faf77587937e506138371f7c Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1379 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-05-08sysfsgpio: do not try to initialise absent signalsPaul Fertser
When e.g. SRST is not specified, the current code results in assigning 0 to srst_fd and subsequently a stray '1' is output on screen on reset. Avoid this by not doing bogus initialisation. Change-Id: Iadb847a384a927ae746124cf6e4e3c6cc8b11406 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1375 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-05-06jtag/adapter: add connect_[de]assert_srst to reset_config usagePaul Fertser
Add the connect under reset options to the online help for reset_config. Change-Id: I4b9a87b234de01531390b39b898a848841d1e834 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1377 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-28build fix: ft2232Oleksij Rempel
fix build with-ftd2xx-lib Change-Id: I4a9b5d204c29b7a0714a59494b2b5f959c73f99b Signed-off-by: Oleksij Rempel <linux@rempel-privat.de> Reviewed-on: http://openocd.zylin.com/1359 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-21Support newer OSBDM firmwareR. Steve McKown
OSBDM: add new VID:PID implemented in OSJTAG/OSBDM firmware somewhere between versions 30.13 and 31.21. PFLASH programming works with this patch, tested on a Freescale Kinetis TWR-K20D72M using its onboard OSBDM JTAG adapter. Note: flash program testing required hacking kinetis_write() to force longword programming, as the FTFL program section commands formulated by kinetis_write() currently fail on this board's PK20DX256VLL7 processor. Change-Id: Ib7b92ff2fe9ebf6158fb1489f554a19e96cd9651 Signed-off-by: R. Steve McKown <rsmckown@gmail.com> Reviewed-on: http://openocd.zylin.com/1348 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-04-17stlink: fix connect under reset issuesSpencer Oliver
We need to make sure that srst is asserted before we attempt to switch into jtag or swd mode otherwise we receive a error (-9) - invalid device id. Change-Id: I625166c751cfba8e8a5290f40122bb9afc9dbb39 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1315 Tested-by: jenkins
2013-04-17parport: fix parport_toggling_time regressionSpencer Oliver
If parport_toggling_time is called before the adapter speed has been configured then the call fails. Probably not the best fix, but does at least enable parport_toggling_time to be used again. This regression was added in commit 740b9e25b410c164e661d0334a9ea4168406726b Change-Id: I90300916d6bda5ef053c557e5ac136c4f002bdd1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1309 Tested-by: jenkins
2013-04-17ft2232: remove ft2232_large_scan memory leakAndreas Fritiofson
This is a very long outstanding issue see: http://lists.berlios.de/pipermail/openocd-development/2011-June/019404.html As this driver is deprecated the fix is added to purely to reduce the warnings reported by clang. Change-Id: I3a16a704e0e8db27efda50fdcfdd35abf5ebed0f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1278 Tested-by: jenkins
2013-04-17libusb: disable debug messages by defaultSpencer Oliver
Change-Id: I15dec0f521502139b57adaff576516af7883a74b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1314 Tested-by: jenkins
2013-04-11ft2232: fix input scan ending in drshift/irshiftYann Vernier
The final bit was incorrectly added as output data, even if no data was to be written. Changed it to match handling of other bits. Change-Id: I91e5ba0c932876bfb579c22e6c7ef0300baa1534 Signed-off-by: Yann Vernier <yann.vernier@orsoc.se> Reviewed-on: http://openocd.zylin.com/1049 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-31ti_icdi: add icdi_usb_query result checkSpencer Oliver
Change-Id: I0b40586677a77ee6ae46fe120a677616bde22d1e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1279 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-03-13jtag: add support for some probes that are mostly compatible with opendousStefan Mahr
This patch adds support for usbprog-jtag and usbvlab that are mostly compatible to opendous except for IN and OUT endpoints and usb transfer mode. Change-Id: I44557c2449fe7473295038efa6ae4fc8d80ec7bf Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/687 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13jtag: usb_blaster: fix allocation of usb_blaster_device_descStefan Mahr
usb_blaster_device_desc was allocated, but never freed. Change-Id: I764bd092c71b8c260b98aab0e7a1710fd7bfa9fd Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1224 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: jenkins
2013-03-13jtag: parport: avoid freeing read-only memory sectionStefan Mahr
If command parport_cable is not executed, parport_cable points to const char array in read-only memory as default. On exit free() will try to free this read-only memory. This patch uses strdup to allocate memory when defining default setting. Change-Id: I290e707ac6a37e9dc1b45c85ca51d8bd6aac6761 Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1223 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13jtag: opendous: fix tap buffer overflowStefan Mahr
Appending bits to TAP buffer doesn't check if there's enough space left. This patch adds this check to fix TAP overflow error. Change-Id: If80d5ab4a24983ad24f3cab31f9676d1590ebf5d Signed-off-by: Stefan Mahr <stefan.mahr@sphairon.com> Reviewed-on: http://openocd.zylin.com/1216 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-13ft2232: ft2232_channel option addedRodrigo Melo
With this option a different channel of the ft2232 chip can be selected using a previously existing layout. It was made for a partner called Salvador Tropea. Change-Id: Ia0dedb2f50e232d089e73788735edc8f47ee23e6 Signed-off-by: Rodrigo Melo <rmelo@inti.gob.ar> Reviewed-on: http://openocd.zylin.com/1095 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-03-06ti-icdi: catch failed icdi_send_cmdSpencer Oliver
warnings detected by clang. Change-Id: I1532bcc12a8ab7446646dfb2a7afa8894ff03679 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1180 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-03-06speed up ftdi by reorder to out-inPeter Henn
When the ftdi driver calls finally the mpsse_flush function, it first initiate the USB in and finally the corresponding USB out transaction. Because data in is requested too early the USB device will always answer the first USB in by a NAK. That can prevented by a simple reordering of the out and then the in transfer and can improve the Jtag performance for high JTAG clock rates. Change-Id: I17abf1487c914c92e2e447ee6d30562ef629f327 Signed-off-by: Peter Henn <Peter.Henn@web.de> Reviewed-on: http://openocd.zylin.com/942 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2013-02-25Fix buffer overflow in versaloon interfaceJoerg Fischer
The USB buffer will need space for both TMS and TDI buffers. Each holds tap_buffer_size bytes maximum, so tap_buffer_size must be smaller than half of usb buf_size. Change-Id: Id8f39936a894cbd98deb89eec5a859aef1e2b783 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/1136 Tested-by: jenkins Reviewed-by: simon qian <simonqian.openocd@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-02-08jtag_interface: .speed can be NULL when not neededFranck Jullien
adapter_init (core.c) won't check speed configuration of the selected interface if it's not needed (.speed = NULL). When it's not needed, we can now omit adapter_khz in init scripts and we don't have to implement dummy handlers for speed_div and khz functions. It also removes calls to adapter_khz in interface configuration files when not used anymore. Change-Id: I6eb1894385503fede542a368f297cec6565eed44 Signed-off-by: Franck Jullien <franck.jullien@gmail.com> Reviewed-on: http://openocd.zylin.com/1131 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-01-27jtag: only change state if necessarySpencer Oliver
All the other drivers will only change the state if required. This brings all the other drivers inline with this behaviour. The original issue relates to problems on xscale commit 7989000e0969c1ccf69acbc3ce649a020bc1ee66 Change-Id: Ifc90ec2eef68a70a14f37c00931a07982bfa200c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1114 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-01-27libusb: idProduct of USB device may be zeroHsiangkai Wang
There is no constraint about idProduct in USB spec. So, pids[i] may be 0 for USB devices. Change-Id: I19d8974f4e7082e8b7e1f2d33c019ac4e61bc1e2 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1091 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2013-01-16opendous: Inhibit unnecessary state transitionsRoman Reichel
When current tap state and end state are the same, transitions are added which is not what should happen. The usbprog driver was already patched like this long time ago. Change-Id: I339e87156bdc7b5c83c10c14025b749605d3871a Signed-off-by: Roman Reichel <romanreichel@aol.de> Reviewed-on: http://openocd.zylin.com/1113 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-12-24stlink: print target voltage if supportedSpencer Oliver
The stlink/v2 has the ability to check the target voltage if the firmware is recent enough (>= J13). As a debugging aid we check the voltage at startup and issue an error if this is too low to debug reliably. Change-Id: I98e251f3880e31049c4307051c30bedd3451cf87 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/980 Tested-by: jenkins
2012-12-24stlink: add generic open error routineSpencer Oliver
Change-Id: I1cd18896ab2a37255471a2d160befed8dd8fb544 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/979 Tested-by: jenkins
2012-12-23icdi: add TI icdi interfaceSpencer Oliver
This is the new proprietary interface replacing the older FTDI based adapters. It is currently fitted to the ek-lm4f232 and Stellaris LaunchPad. Change-Id: I794ad79e31ff61ec8e9f49530aca9308025c0b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/922 Tested-by: jenkins
2012-12-23hla: add ability to configure read/write buffer sizeSpencer Oliver
Other adapters (TI ICDI) that use this driver can use a larger read/write buffer size than the original stlink could. Change-Id: I9beb7748049097cbe29a2340799c450bd74e199d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/948 Tested-by: jenkins
2012-12-23stlink: rename stlink cmd namesSpencer Oliver
As part of the switch to using the hla for the stlink interface we rename the cmds to a more generic name. Update scripts to match new names. Also add handlers for deprecated names. Change-Id: I6f00743da746e3aa13ce06acfdc93c8049545e07 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/921 Tested-by: jenkins
2012-12-23target: add deprecated target name supportSpencer Oliver
This enables us to change the target name without breaking any target scripts. Change-Id: I635f961e573264d3dab2560f3a803ef1986ccfde Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/919 Tested-by: jenkins
2012-12-23stlink: print version infoSpencer Oliver
Print stlink info always rather than just when debug log enabled. Change-Id: I2a29ef046925200e1c94624280c0b252fab5219a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/925 Tested-by: jenkins
2012-12-23stlink: use common layoutSpencer Oliver
Even though the stlinkv1 and stlinkv2 use different usb classes they share the same layout scheme. Merge the two into a common layout, thus enabling us to support other adapter layouts. Change-Id: I7d02c44a7f94ebc7f2cb5428b02ee40294fb430d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/918 Tested-by: jenkins
2012-12-10jtag: fix reset_config copy/paste errorSpencer Oliver
As the other arg checks do not OR, it is assumed this is a copy/paste error from the original code author. Change-Id: I7dfc7396254a6f558887def951c57dfd4a0e6c2c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/997 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-12-10stlink: enable connect under resetSpencer Oliver
Currently if the target supports srst_nogate we wait until target assert_reset until we get a chance to assert the srst. However sometimes we will not get this far if the target has already failed the initial scan. This has been tested on stm32. Change-Id: I2c4486942a011534d3e2044788563669bf457b60 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/972 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-12-10jtag: enable connect under resetSpencer Oliver
Currently if the target supports srst_nogate we wait until target assert_reset until we get a chance to assert the srst. However sometimes we will not get this far if the target has already failed the jtag_examine_chain. This has been tested on targets that support this behaviour (STM32 and STR9). Change-Id: Ibcf7584b137b472f31ba6ddd5cd99d848c5508d1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/971 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-12-10jtag: add connect_type reset_config mode flagSpencer Oliver
This adds the ability to request to the adapter how we want to connect to the target, eg. while srst is asserted or not. This ability can very handy for connecting to unresponsive targets. A prerequisite is that the target supports srst_nogate. Change-Id: I0f7c9475160048e8a963e16077754f5403ac8325 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/976 Reviewed-by: Paul Fertser <fercerpav@gmail.com> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-11-23stlink: format src definesSpencer Oliver
Change-Id: I7c3fd6e84681e007f1983ad9b8c85369cf9f3ba1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/978 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 09:39:04 +0000