| Age | Commit message (Collapse) | Author |
|---|
|
After previous efforts, only one Jim routine remained in jtag/core.c,
and moving it to jtag/tcl.c painlessly finishes separating these layers.
The headers need separating, but the implementation is clean.
|
|
Help alleviate further potential problems with interactive startup.
|
|
Adds 'jtag init' command handler, which can be called as part of a
fine-grained 'init' process.
|
|
Adds 'interp' field to jtag_tap_event_action structure to avoid
using the global variable of same name.
|
|
Moves the ID and IR-related option parsing to static helpers, removing
two levels of indent.
|
|
Splits bulk of the jtag_tap_configure into jtag_tap_configure_event,
removing three or four levels of indentation in the process.
The resulting code was stylistically improved in other ways, but it
should be functionally identical.
|
|
Use 'continue' to reduce identation levels and superfluous logic.
|
|
Moves the tertiary jim handlers and required static helpers to the top
of tcl.c, defining them in a new registration array that is chained in
both the top-level context and under the jtag command. The top-level
commands can be removed at some point in the future to reduce clutter.
|
|
Explodes the 'jtag' into separate command handlers, which are easier
to understand and extend. Makes the code much easier to understand,
though further simplifications are possible. This patch tries to
minimize the noise when viewed with 'git diff -w'.
Gives these commands improved built-in help and usage information.
|
|
Search and destroy lingering cases where the ARRAY_SIZE macro should
be used to convey more intrinsic meaning in the OpenOCD code.
|
|
Adding jim_handler field to command_registration allows removing the
register_jim helper. All command registrations now go through the
register_command{,s}() functions.
|
|
Changes the jtag_interface->register_callbacks field to a list of
commands to be registered. Changes callback to invocation of
register_commands() with that command registration list. Removes all
JTAG interface driver register_command callback functions, which the
previous commits had converted into identical calls.
|
|
Use register commands with command registration array.
|
|
Replaces direct calls to register_command() with a macro, to allow
its parameters to be changed and callers updated in phases.
|
|
Allow JTAG interface drivers to skip registering an register_commands
callback when it will just be empty.
|
|
Updates all command parsing of simple "enable" and "disable" arguments.
A few case in the tree use a tri-state or extended arguments, which
cannot use this simple macro.
Simlifies the xscale icache/dcache command handler logic.
|
|
Convert all command handler 'cmd_ctx' parameter usage with CMD_CTX.
|
|
This patch converts all instances of 'args' in COMMAND_HANDLER routines
to use CMD_ARGV macro.
|
|
This patch converts all instances of 'argc' in COMMAND_HANDLER routines
to use CMD_ARGC.
|
|
Improves the name of this macro, moves it to types.h, and adds a block
of Doxygen comments to describe what it does.
|
|
Remove misleading typedef and redundant suffix from struct command_context.
|
|
Remove useless typedef and redundant suffix from jtag_tap_event_action.
|
|
Remove useless typedef and redundant suffix from struct jtag_interface.
|
|
Remove useless structure typedef.
|
|
Search and destroy the jtag_tap_t typedef. This also cleans up a
layering violation, removing the declaration from types.h.
|
|
By introducing the CMD_NAME macro, this parameter may be integrated
as args[-1] in command.[ch], without touching any other call sites.
|
|
By using CALL_COMMAND_HANDLER, parameters can be reordered, added, or
even removed in inherited signatures, without requiring revisiting
all of the various call sites.
|
|
|
|
Without this patch, running "openocd -c 'jtag interface'" segfaults.
Now, it returns the string "undefined" when the interface is unset.
|
|
Contrary to my previous assessment, some opportunities to remove forward
declarations were overlooked. Remove them by moving the definitions
of the command registration and interface structure to the end of files.
|
|
It's been about a year since these were deprecated and, in most
cases, removed. There's no point in carrying that documentation,
or backwards compatibility for "jtag_device" and "jtag_speed",
around forever. (Or a few remnants of obsolete code...)
Removed a few obsolete uses of "jtag_speed":
- The Calao stuff hasn't worked since July 2008. (Those Atmel
targets need to work with a 32KHz core clock after reset until
board-specific init-reset code sets up the PLL and enables a
faster JTAg clock.)
- Parport speed controls don't actually work (tops out at about
1 MHz on typical HW).
- In general, speed controls need to live in board.cfg files (or
sometimes target.cfg files), not interface.cfg ...
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
|
|
Get rid of needless variable, improve and shrink diagnostic.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
Some cosmetic cleanup, and switch to a single table mapping
between state names and symbols (vs two routines which only
share that state with difficulty).
Get rid of TAP_NUM_STATES, and some related knowledge about
how TAP numbers are assigned. Later on, this will help us
get rid of more such hardwired knowlege.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
|
|
- revert to previous default: don't talk JTAG during SRST
- add "srst_nogates" flag, the converse of "srst_gates_jtag"
- with no args, display the current configuration
And update the User's Guide text with bullet lists to be a bit more clear.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2818 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
control over how OpenOCD starts up and initializes the target.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2805 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
The model is that this fires after scanchain verification, when it's
safe to call "jtag tapenable $TAPNAME". So it will fire as part of
non-error paths of "init" and "reset" command processing. However it
will *NOT* trigger during "jtag_reset" processing, which skips all
scan chain verification, or after verification errors.
ALSO:
- switch DaVinci chips to use this new mechanism
- log TAP activation/deactivation, since their IDCODEs aren't verified
- unify "enum jtag_event" scripted event notifications
- remove duplicative JTAG_TAP_EVENT_POST_RESET
git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@2768 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Change the handling of the "-ircapture" and "-irmask" parameters
to be slightly more sensible, given that the JTAG spec describes
what is required, and that we already require that conformance in
one place. IR scan returns some bitstring with LSBs "01".
- First, provide and use default values that satisfy the IEEE spec.
Existing TAP configs will override the defaults, but those parms
are no longer required.
- Second, warn if any TAP gets set up to violate the JTAG spec.
It's likely a bug, but maybe not; else this should be an error.
Improve the related diagnostics to say which TAP is affected.
And associated minor fixes/cleanups to comments and diagnostics.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2758 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Shrink messaging during resets, primarily by getting rid of
"nothing happened" noise that hides *useful* information.
- Improve: the "no IDCODE" message by identifying which tap only
supports BYPASS; and the TAP event strings.
Related minor code updates:
- Remove two needless tests when examining the chain: we know
we have a TAP, and that all TAPs have names.
- Clean up two loops, turning "while"s into "for"s which better
show what's actually being done.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
for disabling TAPs. We don't actually know how to make any
JRCs which do that yet; but when we do, this will matter.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2735 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
avoid a duplicate test.
Plus other cleanup in the same code: be "static", sane line lengths
for source and diagnostics, and fix misleading variable names.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2725 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
srst_gates_jtag added to reset_config. Could i.MX27 be a case where srst does not pull trst, but really srst gates jtag clock?
git-svn-id: svn://svn.berlios.de/openocd/trunk@2720 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
tickle's after a TAP_RESET.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
- Infinite loop bugfix when running tap configure a second time
git-svn-id: svn://svn.berlios.de/openocd/trunk@2681 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@2606 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Change jtag_rclk behaviour so it can be called before the interface init function
git-svn-id: svn://svn.berlios.de/openocd/trunk@2590 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
Warn about anyone using "jtag_speed" commands; that command is obsolete, and will someday be removed.
git-svn-id: svn://svn.berlios.de/openocd/trunk@2578 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@2549 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
|
git-svn-id: svn://svn.berlios.de/openocd/trunk@2488 b42882b7-edfa-0310-969c-e2dbd0fdcd60
|
