aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/jtag.h
AgeCommit message (Collapse)Author
2008-09-20- added myself to copyright on files i remember adding large contributions ↵ntfreak
for over the years - cleaned up headers to match rest of code - added missing svn props for previously added files git-svn-id: svn://svn.berlios.de/openocd/trunk@987 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-27comment about slow RTCKoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@972 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-05Duane Ellis: fix warningsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@890 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-25added yours sincerely for files where I feel that I've made non-trivial ↵oharboe
contributions. git-svn-id: svn://svn.berlios.de/openocd/trunk@872 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-21comment.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@671 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-05-07This matters for embedded devices, but is probably not observably better for ↵oharboe
PC hosted OpenOCD. git-svn-id: svn://svn.berlios.de/openocd/trunk@647 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-30Edgar's naming convention fixes.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@629 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-30Edgar's added support for printing jtag_khzoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-11Reset wip. Just adding hooks. This is just to reduce the size of the actual ↵oharboe
change, no change in behaviour. git-svn-id: svn://svn.berlios.de/openocd/trunk@565 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-09- added "init" command. "init" and "reset" at end of startup script is ↵oharboe
equivalent to daemon_startup(still supported). - print warning if srst and trst change state at the same time when srst_and_trst is seperate - reset now performs a trst, examines and validates the jtag chain before targets assert reset - if startup fails to examine and validate the jtag chain, try a reset before trying again git-svn-id: svn://svn.berlios.de/openocd/trunk@552 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-04-08Pavel pointed out that jtag_add_tlr() is better than jtag_add_tms().oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@547 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-31Do not assert trst in srst_only case even if srst_pulls_trst.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@530 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-31make jtag_add_statemove() internal to the driver.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@527 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-26TAP_SD/SI are now forbidden end states.oharboe
jtag_add_reset() now returns void streamlining the API git-svn-id: svn://svn.berlios.de/openocd/trunk@525 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13clarified jtag_khz command.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@513 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13added jtag_khz for use with target libraryoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@512 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-13- adds two speeds to jtag_speed. reset and post reset speed. Defaultoharboe
is post reset = reset speed. - removed infinite loop's and exit()'s upon poor arm7/9 communication - cleaned up error messages a bit. Push ERROR() up into fn's that fail and can say something meaningful about what failed. git-svn-id: svn://svn.berlios.de/openocd/trunk@511 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11- retired unused jtag events. The code was incorrectoharboe
- hopefully clarified the difference between TRST and TMS reset. - added DEBUG() statements w.r.t. state changes - TRST released and moving out of TAP_TLR are completely different events. Only TRST released has a DEBUG() statement git-svn-id: svn://svn.berlios.de/openocd/trunk@496 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11- fixed jtag_add_reset(). It no longer causes jtag_execute_queue() tooharboe
fail for two of it's return codes. A little bit weird, but compatible with existing codebase. - tightend up error handling. Since the jtag_xxx() is a queue that is either executed as things are added(hw queue) or a software queue, then errors can only be caught during jtag_execute_queue(). No error code is therefore returned from the queuing fn's. git-svn-id: svn://svn.berlios.de/openocd/trunk@492 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-06comment.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@455 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05- This speeds up dcc arm7_9 bulk write a little bit and exercises the ↵oharboe
jtag_add_dr_out() codepath - added a check to jtag_add_pathmove() for legal path transitions - tweaked jtag.h docs a little bit - made some jtag bypass tests _DEBUG_JTAG_IO_ git-svn-id: svn://svn.berlios.de/openocd/trunk@448 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-05added jtag_add_dr_out(). Better for hw fifo, same for software fifo.oharboe
Passes 94kBytes/s regression test. Works with str912, which relies on bypass git-svn-id: svn://svn.berlios.de/openocd/trunk@447 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28fix gaffe.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@375 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28jtag_add_shift() fn - minidriver work in progress.oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@367 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26Next step in the JTAG minidriver. This should be fairly close to the final ↵oharboe
thing, but I'm not calling it "done" quite yet. git-svn-id: svn://svn.berlios.de/openocd/trunk@350 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-26- jtag minidriver work in progressoharboe
- svn:eol-style=native. Let's see how that works out :-) git-svn-id: svn://svn.berlios.de/openocd/trunk@349 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25Fix from Pavel Chromy.oharboe
https://lists.berlios.de/pipermail/openocd-development/2008-February/001018.html git-svn-id: svn://svn.berlios.de/openocd/trunk@343 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-25From Michael Bruckoharboe
- bugfix in server.c - removed unused parameter from jtag_add_ir_scan et al. This wasn't necessary in hindsight but anyway. - arm11 source committed but not not in Makefile.am/target.c for now. git-svn-id: svn://svn.berlios.de/openocd/trunk@341 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24- concretize JTAG state transition rules (previously implied behaviour is ↵drath
now documented) git-svn-id: svn://svn.berlios.de/openocd/trunk@329 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24sharpend JTAG docs w.r.t. hw fifo implementations and retired ↵oharboe
jtag_cancel_queue() which is inheritely incompatible with a hw fifo concept. git-svn-id: svn://svn.berlios.de/openocd/trunk@328 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-10- added patch to change pathmove handlingmifi
https://lists.berlios.de/pipermail/openocd-development/2008-January/000678.html (thanks to Øyvind for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@286 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-20- added patch "remove error handler as planned"mifi
https://lists.berlios.de/pipermail/openocd-development/2008-January/000665.html (thanks to oyvind Harboe for the patch) git-svn-id: svn://svn.berlios.de/openocd/trunk@260 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-01-07- added gdb flash fixes patch mifi
https://lists.berlios.de/pipermail/openocd-development/2007-December/000548.html - added synthesize in_check_mask/value and error handler patch https://lists.berlios.de/pipermail/openocd-development/2008-January/000554.html (thanks to oyvind harboe for these patches) git-svn-id: svn://svn.berlios.de/openocd/trunk@248 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-25- reformat src/jtag/bitq.c (thanks to Pavel Chromy)drath
- fix multiple reads from FT2232 into same buffer location (thanks to Magnus Lundin) - retry JTAG chain validation (thanks to Magnus Lundin) - reworked GDB packet input handling (thanks to Pavel Chromy) - output error message when setting a watchpoint failed - removed duplicate out-of-bounds check in at91sam7.c (thanks to Pavel Chromy) git-svn-id: svn://svn.berlios.de/openocd/trunk@181 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-07-15- added support for Asix Presto JTAG interface (thanks to Pavel Chromy and ↵drath
Asix for making this addition possible) - added support for usbprog (thanks to Benedikt Sauter) - make OpenOCD listen for WM_QUIT messages on windows (thanks to Pavel Chromy) - register at_exit handler to do necessary unregistering (thanks to Pavel Chromy) - added dummy ETM capture driver to allow ETM to be registered without a capture driver git-svn-id: svn://svn.berlios.de/openocd/trunk@180 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-06-21- added support for Intel/Marvel PXA27x (XScale) targetsdrath
- added support for scans coming from or ending in Shift-DR or Shift-IR to bitbang code (required for XScale debugging) - cleaned up errror handlers. only use when there's a catchable error - fix segfault when etm was configured without a valid driver git-svn-id: svn://svn.berlios.de/openocd/trunk@176 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-25- added support for error handlers to JTAG scan commands ↵drath
(jtag_[plain_][ir|dr]_scan) - catch apparently broken JTAG IR scan after ARM926EJ-S CP15 operations - added "arm7_9 dump_etb" command git-svn-id: svn://svn.berlios.de/openocd/trunk@142 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-04-11- disabled excessive debug output in jtag.hdrath
- output all of EmbeddedICE version register in error message - update OpenOCD's idea of the current core mode, and immediately change core mode, on CPSR changes - added support for CFI cmdset 0002 (patch by Andrew Dyer, thanks a lot) - enhanced CFI cmdset 0002 support to Atmel AT49 flashes (thanks to Joerg Krein for providing test hardware) git-svn-id: svn://svn.berlios.de/openocd/trunk@138 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-26- fixed arm926 cp15 command bug (thanks to Vincent Palatin for this patch)drath
- fixed compiler warnings throughout the code (thanks to Vincent Palatin for this patch) - added support for accessing ETB (embedded trace buffer) registers git-svn-id: svn://svn.berlios.de/openocd/trunk@134 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-15- reworked file i/o. every fileaccess (target, flash, nand, in future ↵drath
configuration, too) should now go through the fileio subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers (preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far) - added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-31- merged several changes from XScaledrath
- complain about identify_chain scan with all bits one (jtag communication problem) - add 0x80000 as a valid size for lpc2000_v2 flash banks (previously only the user accessible 0x7d000 were valid) git-svn-id: svn://svn.berlios.de/openocd/trunk@129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-25- disabled JTAG debug outputdrath
- fixed version information git-svn-id: svn://svn.berlios.de/openocd/trunk@127 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-22- fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)drath
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin) - fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this) - add support for reading JTAG device id (currently only as debug output on startup) - cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number. - small cleanups/fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31- endianess fixes everywhere but in the flash code. flashing might still be ↵drath
broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-17- renamed jtag_interface_t.support_statemove to ↵drath
jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag" git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-11- added support for FreeBSD ppi (parallel port access similar to ↵drath
/dev/parport on linux) (thanks to Darius for this patch) - unified 'ftd2xx' and 'ftdi2232' into a single interface 'ft2232'. The library used to access the hardware is choosen during configure with --enable-ft2232_ftd2xx or --enable-ft2232-libftdi. git-svn-id: svn://svn.berlios.de/openocd/trunk@83 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-30- added configurable delays after reset lines get deasserted. useful if ↵drath
reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-25- added "version" command (patch from John Hartman, thanks)drath
- fixed bug in telnet history handling (patch from John Hartman, thanks) - OpenOCD version has been changed from SVN revision number to date/time git-svn-id: svn://svn.berlios.de/openocd/trunk@74 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-23- added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 12:33:01 +0000