aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/drivers
AgeCommit message (Collapse)Author
2011-08-31ULINK driver: Re-order queue functions to reflect the order in commands.hMartin Schmölzer
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
2011-08-31ULINK driver: Properly propagate return values in ulink_execute_queue()Martin Schmölzer
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
2011-08-31ULINK driver: Update some comments, fix some coding mistakesMartin Schmölzer
Signed-off-by: Martin Schmölzer <martin.schmoelzer@student.tuwien.ac.at>
2011-08-31vsllink driver compile fails with'vsllink_debug_buffer' defined but not usedsimonqian.openocd
USB communication is handled by code under versaloon directory. So _DEBUG_USB_COMMS_ should not be used in vsllink.c. Attachment is the patch.
2011-08-16versaloon driver updateSimonQian
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-11ftd2xx: fix build warningsSpencer Oliver
Due to build warnings introduced in newer versions of ftd2xx we use strings to report errors rather than result codes. This also gives us the same behaviour as libftdi. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-10rlink: read only the expected number of bytesAndreas Fritiofson
After correcting the reply size counter, it should be safe to rely on it for the number of bytes expected in the USB read, instead of reading the endpoint maximum. This doesn't make things go any faster but it's nicer and removes the local buffer. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: simplify and optimize queue fill level checksAndreas Fritiofson
Add a helper function for running the queue if it would overflow otherwise. Use it to simplify the queue fill level checks and optimize in a few cases that would previously run the queue prematurely. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: remove redundant text from log messagesAndreas Fritiofson
__FILE__ and __LINE__ are already printed using the log macros. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: remove duplicated codeAndreas Fritiofson
After the reply_index handling is fixed, there's no need to special case the out scan. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: fix reply counter to enable sending full buffersAndreas Fritiofson
dtc_queue.reply_index was wrongly being increased during out scans, causing the queue to be sent before the out buffer was full. This patch increases raw upload speed by 50% or so. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: more indentation fixesAndreas Fritiofson
Remove unnecessary block scopes to reduce indentation level. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-08-10rlink: fix indentation errorsAndreas Fritiofson
Indentation was inconsistent and some lines not indented at all. Quickfix using Eclipse's auto-indentation. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2011-07-12ftd2xx: handle FT_GetLatencyTimer bug in v1.04Spencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-12busblaster: Fix warnings when building against D2XXSpencer Oliver
The default is -Werror, so warnings become errors. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-07-12ft2232: Fix warnings when building against D2XXSteve Bennett
The default is -Werror, so warnings become errors Signed-off-by: Steve Bennett <steveb@workware.net.au> Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-06-26Include ULINK driver in src/jtag/drivers/Makefile.amMartin Schmölzer
A new variable "nobase_dist_pkglib_DATA" is introduced to install the OpenULINK firmware image to $PREFIX/lib/openocd/OpenULINK/ulink_firmware.hex Also, the variable "EXTRA_DIST" is used to include the OpenULINK firmware source in the OpenOCD source distribution.
2011-06-26Add OpenULINK firmwareMartin Schmölzer
Build requires SDCC, the Small Device C Compiler.
2011-06-26Add source code for new ULINK driverMartin Schmölzer
2011-06-13transport: move files over to transport folderØyvind Harboe
as we introduce swd and jtag as two transports, we want to start up with a new transport folder to organize the code a bit.
2011-06-12cleanup trailing whitespacesRodrigo L. Rosa
2011-06-12Added minimodule (ftdi) interfaceRodrigo L. Rosa
2011-06-07Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - leftover ↵Freddie Chopin
changes
2011-05-01adapter speed: require init script setting and centralize activation from ↵Jonas Hörberg
drivers to core.c Signed-off-by: Jonas Hörberg <jhorberg@sauer-danfoss.com>
2011-04-26buspirate: fix building on some OSesDamjan Marion
2011-04-09jlink: jlink_debug_buffer use inline function when _DEBUG_USB_COMMS_ not defineJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-04-08Buffering for up to 64 bytes in USB Blaster.Ali Lown
Uses a global buffer. Add self to acknowledgements.
2011-04-08Add support for LED to USB Blaster code.Ali Lown
2011-03-17Fix a bunch of typos.Uwe Hermann
Fix a bunch of typos. Most are in code comments, so nothing should break. UNKOWN_COMMAND and CMD_UNKOWN are not used elsewhere, so correcting the spelling should also not break anything.
2011-03-13jlink: add Emulator configuration supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add detect hw typeJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: use tap buffer as 2kJean-Christophe PLAGNIOL-VILLARD
as said in the datasheet Section 3.3.2 Organization of buffers All buffers are big enough to hold 2 KByte of data. this will double the speed of download Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add capability dumper and commandJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-03ft2232: fix log message and change log output to debugMathias K
2011-03-02jlink: add jlink_pid to specify the pid to useJean-Christophe PLAGNIOL-VILLARD
this will allow us to use multiple jlink at the same time as when the USB-Address is specified the PID change from 0x0101 to (0x101 + usb_adress) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: switch commands to subcommandsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: harmonise the device name to J-LinkJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: add new PID and VIDJean-Christophe PLAGNIOL-VILLARD
The default pid of the segger is 0x0101 But when you change the USB Address it will also pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-02-24ft2232: fix possible read buffer overflowMathias K
This patch fix a possible read buffer overflow in ft2232_execute_queue. Also the correct read queue size for libftdi and libftd2xx was added and and tested. In function ft2232_write a uninitialized value was initialized because we don't know if this value was set in the ftdi api call.
2011-02-23jlink: set the speed at JLINK_MAX_SPEED when an exceeded speed is requestedJean-Christophe PLAGNIOL-VILLARD
it will allow to be at the highest speed of the jlink without touching the board or cpu config tested on sam-ice v5 and at91rm9200-ek Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-02-14ft2232: add functions for ft2232 set data bits high/low byte commandMathias K
reduce duplication. No change in behavior.
2011-02-08buspirate: Fix command parsing, fix errors to have more sense.Michal Demin
Signed-off-by: Michal Demin <michaldemin@gmail.com>
2011-01-26add basic TI xds100v2 supportMathias K
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-09nit: more LOG_* \n fixesEric Wetzel
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
2011-01-05nit: do not add \n at end of LOG_ERROREric Wetzel
Fixed in many other places, and submitted in response to Øyvind's invitation.
2010-12-16Fix for compilation failure amt_jtagaccel.cJohn Devereux
Hi, I think there are errors in amt_jtagaccel.c I attach a small patch that I needed to make it compile.
2010-12-08build: fix build from previous commitSpencer Oliver
commit 740b9e25b410c164e661d0334a9ea4168406726b broke the drivers for ftdi and parport due to retval already being defined. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-08jtag: getting the JTAG speed can failØyvind Harboe
If the JTAG speed has not been set, then it has no defined value, add code to propagate the error. No change to actual behavior as no new failure paths have been introduced. This is a no-op patch to make subsequent patches smaller. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-30Some cosmetic fixes to the Lisa/L layout support functions.Piotr Esden-Tempski
2010-11-30Added support for the blinking leds on Floss-JTAG v0.3 and newer.Piotr Esden-Tempski
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 08:38:10 +0000