aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/drivers/stlink_usb.c
AgeCommit message (Collapse)Author
2015-05-17jtag/drivers/stlink: fix SRST issue with stlink-v1Paul Fertser
Even though the latest firmware version for stlink-v1 supports "v2" JTAG API, the hardware SRST handling is still broken; amend the check accordingly. Change-Id: I62c662cd7aa209d2d6e9fe260f5c0be81d0ce672 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2761 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-04-16stlink_usb.c: Decode some more errors.Uwe Bonnes
Change-Id: I637cb63bd39120554aa184eaa48fd00a4852359f Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/2706 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-03-25armv7m_trace, stlink: provide APIs to capture trace with an adapterPaul Fertser
Change-Id: I9d193dd5af382912e4fe838bd4f612cffd11b295 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2540 Tested-by: jenkins
2015-03-25armv7m: add generic trace support (TPIU, ITM, etc.)Paul Fertser
This provides support for various trace-related subsystems in a generic and expandable way. Change-Id: I3a27fa7b8cfb111753088bb8c3d760dd12d1395f Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2538 Tested-by: jenkins
2015-03-09stlink: avoid null pointer dereference in stlink_usb_close()Paul Fertser
Otherwise it happens if stlink can not be opened on start. Change-Id: I7088f10e61508dae230eccfe576a51498c92f5b8 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2550 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Stian Skjelstad <stian@nixia.no>
2015-01-30drivers/stlink: clarify "init mode failed" messagePaul Fertser
The message as it was didn't let the user know that something was wrong with the target or wiring. Change-Id: Ib609c2d31959e77413e61c348d0e31d7269d5c58 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2365 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Jens Bauer <jens@gpio.dk>
2015-01-26jtag/drivers/stlink: demote the output of available speeds to DEBUGPaul Fertser
Change-Id: If0afb6fb1cb2f39619e4e614573065c145255c3e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2469 Reviewed-by: Jens Bauer <jens@gpio.dk> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2015-01-15stlink: add reconfigurable speed supportSpencer Oliver
The ability to change the speed has been added to firmware versions J22 and above. Any attempt to change on earlier versions will be ignored without error, as the existing code does. For supported firmware versions the driver will attempt to get as close as possible to supported speeds (never higher). The default stlink speed on power up is 1.8MHz. The driver will now also print supported clocl speeds during init. Change-Id: Iee9bd018bb8b6f94672a12538912d41c23d48a7e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2335 Tested-by: jenkins
2014-09-22Support hla_serial command for ST-LINK adapters.Austin Phillips
The hla_serial command allows for a programming device serial number to be specified in addition to USB VID/PID. This allows for multiple ST-LINK/V2 programmers to be attached to a single machine and operated using openocd. Change-Id: I350654bf676eb26ba3a90450acfa55d2a5d2d791 Signed-off-by: Austin Phillips <austin_phillips@hotmail.com> Reviewed-on: http://openocd.zylin.com/2198 Tested-by: jenkins Reviewed-by: Martin Glunz <mg@wunderkis.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-09-15jtag: drivers: stlink: remove unnecessary '\n' in LOG_* entriesAndrey Skvortsov
Change-Id: Ia2dc3efc27b53334af4d85f9807abba0463c291b Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/2220 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11stlink_usb: Fix swallowed error on read/write operations, add retries on SWD ↵Angus Gratton
WAIT, clean up error debug output. - stlink_usb_get_rw_status() had a bug where FAULT or WAIT responses in read/write operations were ignored, leading to incomplete data. - Added wrapper stlink_cmd_allow_retry to handle SWD_AP_WAIT/SWD_DP_WAIT statuses in most commands. These statuses appear if an SWD read or write received a WAIT ACK response from the target more than 4 times in a row. The driver retries the operation (with exponential backoff) before failing outright (in testing 1 retry was always enough.) - As part of the implementation of stlink_cmd_allow_retry a large number of lines of boilerplate were refactored. - Fleshed out stlink_usb_error_check and added it to some more code paths so WAIT or FAULT responses are logged to debug. WAIT responses will be logged even if they are subsequently retried, which should help in case the retries have subtle side effects (none anticipated.) Tested with two targets: STLINK F0 Discovery, Nordic NRF51822. Only tested with STLINK V2 programmers. Change-Id: I9af24e8f0121b035356dbb9978d6bbf4feb2e4d3 Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/2201 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-08-11Allow transports to override the selected target (hla configs unification)Paul Fertser
This should allow to share common configs for both regular access and high-level adapters. Use the newly-added functionality in stlink and icdi drivers, amend the configs accordingly. Runtime-tested with a TI tm4c123g board. Change-Id: Ibb88266a4ca25f06f6c073e916c963f017447bad Signed-off-by: Paul Fertser <fercerpav@gmail.com> [gus@projectgus.com: context-specific deprecation warnings] Signed-off-by: Angus Gratton <gus@projectgus.com> [andrew.smirnov@gmail.com: additional nrf51.cfg mods] Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Tested-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Reviewed-on: http://openocd.zylin.com/1664 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01jtag/drivers/stlink: allow to reconnect seamlessly after polling failurePaul Fertser
If the communication with the target was failing (either because of an intermittent connection or the target was rebooted), this is needed to reestablish operational state. Reported-by: Tim Sander <tim@krieglstein.org> Tested-by: Tim Sander <tim@krieglstein.org> Change-Id: I91ea2e2b2b5ef8eb27dfe9bae95ef2a919f67e4e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2152 Tested-by: jenkins Reviewed-by: Tim Sander <tim@krieglstein.org> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17stlink_usb.c: add support for STLink V2-1Bartosz Bielawski
The new version of STLink (V2-1) has a different USB endpoint layout. As the PID of the device also changed it's possible to change EPs used by OpenOCD in runtime. The patch adds three new fields to stlink_usb_handle_s and assigns right EP numbers in stlink_usb_open(). Parts of the code inspired by and used with consent of Jens Hoffmann. Change-Id: I93b69fb889f15317e9bf864905f435905db39745 Signed-off-by: Bartosz Bielawski <bartosz.bielawski@gmail.com> Reviewed-on: http://openocd.zylin.com/2019 Tested-by: jenkins Reviewed-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-07stlink: Use callback to increase frequency of trace data samplingAndreas Fritiofson
The ST-LINK/V2 has limited internal buffering, such that trace data can be missed if the target is generating data at a rate quicker than the OpenOCD trace sampling. The issue of lost data is compounded since individual TPIU packets may be split across individual STLINK_TRACE_EP reads, and misleading results can occur if mid-packet loss occurs. This patch increases the frequency of checking for pending trace data with the aim of minimising such losses. Note: With the limited (I/O and memory) bandwidth of the ST-LINK/V2 there cannot, however, be a guarantee against trace data loss. The timer callback is only added when enabling tracing, and is removed when tracing is disabled. Change-Id: Ibde9794b77793d3068f88cb5c1a26f9ceadcbd8a Signed-off-by: James G. Smith <jsmith@ecoscentric.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1661 Tested-by: jenkins
2014-01-15Conform to C99 integer types format specifiersHsiangkai Wang
Review and modify to conform to C99 integer types format specifiers. Use arm-none-eabi toolchain to build successfully. Change-Id: If855072a8f88886809309155ac6d031dcfcbc4b2 Signed-off-by: Hsiangkai Wang <hsiangkai@gmail.com> Signed-off-by: Hsiangkai <hsiangkai@gmail.com> Reviewed-on: http://openocd.zylin.com/1794 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22stlink: remove stlink_api commandMathias K
Remove stlink_api command. Change-Id: I8f7885d3756fec462f9ebbee2ed285a98a51366c Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/1760 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Remove unnecessary castsAndreas Fritiofson
Change-Id: Ia97283707282ccccdc707c969f59337313b4e291 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-29hla/stlink: Re-order trace parameters to allow trace output file to be optionalJames G. Smith
Re-order the "trace" parameters to allow the raw capture (log) file to be an optional feature. The clock frequency for calculating the "Async Clock Prescalar" is always required when enabling trace processing and is now the first "required" parameter. The ST-Link driver is updated to use the (required parameter) "trace_source_hz" non-zero value as the indicator of trace being required, rather than the now optional output file descriptor being non-NULL. Background: This patch is groundwork for extending the OpenOCD SWO capture to implement other (OpenOCD built-in) ITM/DWT processing where the core trace support is required, but there is no requirement to store raw trace data to a configured host file. By itself this patch is almost a functional NOP, since without the other processing in place there is no reason NOT to specify a capture file. Change-Id: Ibc385dd0a7adaf9bd652bceded27262fef35fd59 Signed-off-by: James G. Smith <jsmith@ecoscentric.com> Reviewed-on: http://openocd.zylin.com/1660 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-25hla: move memory read/write functionality to driverSpencer Oliver
Due to issues reported when using the jtag mode of the stlink (see Trac #61), the functionality/checking has been moved to the driver. This change also fixes unaligned 32bit memory read/write for the stlink. From testing this change also brings a 3KiB/s speed increase, this is due to the larger read/write packets. Change-Id: I8234110e7e49a683f4dadd54c442ecdc3c47b320 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1632 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25stlink: remove usb timeout magic numbersSpencer Oliver
Change-Id: I4ec4cb0bc344c4c1de9113fa12ed84e5e2e87b31 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1631 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-25hla: cleanup read/write apiSpencer Oliver
This is the first part in moving the adapter specific api back into the driver. The next task is to also move the hla read/write buffer size handling. Change-Id: I86a19144b50b6de18659bfcd05b3729b2cafc051 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1621 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-29stlink: Add workaround for intermittent FW info retrieval failureAndrey Smirnov
It appears that on some host USB configurations(2012 MacBook Air) multiple restarts of openocd tool cause the FW on STLINKv2 dongle to go into a weird state in which it will no longer respond to STLINK_GET_VERSION command. This patch adds code that, if said request fails for the first time, attempts to reset the device and retry to initialize it and obtain FW information one more time. Change-Id: I7227fc972adb49d52ae700ad48ab9f66b2aaa72c Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1561 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-08-29stlink_usb: remove gcc-specific constantAndrey Yurovsky
Replace 0b10 with 0x02, 0b is a GCC extension and isn't supported by clang, for instance, so compiling on OS X will fail. No functional changes. Change-Id: Ie882be1563df03e7ad3da0bc9aee65a907a29549 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1560 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-08-07stlink: add SWO tracing supportAndrey Yurovsky
Enable reading the SWO trace output via STLinkv2 dongles that support it. This adds an optional initialization parameter "trace" with which the user specifies a destination file where SWO trace output is appended as it comes in as well as the trace module's source clock rate. STLink will be configured for a 2MHz SWO data rate (STLink's highest supported rate) if the source clock is > 2MHz, otherwise the source clock is used as the data rate directly. For example: trace swo.log 168000000 If "trace" is specified with a usable file path, the stlink_usb driver will attempt to configure and read SWO trace data as follows: - on _run(), the target's TPI and TMI are configured and the STLinkv2 is told to enable tracing. Only generic ARM TPI and TMI registers are configured, any MCU-specific settings (ex: pin routing) are the responsibility of the target firmware. The configuration applied is based on the STLinkv2's capabilities (UART emulation). - on _v2_get_status(), the trace data (if any) is fetched from the STLink after the target status is checked and the target is found to be running. - on _halt(), the STLink is told to disable tracing. When fetching trace data, the entire trace frame is written to the output file and that data is flushed. An external tool may be used to parse the trace data into a more human-readable format. Tested on ARM Cortex M4F and M3 MCUs (STM32F407 and STM32L152). Change-Id: Ic3983d46c82ba77010c23b0e18ce7b275d917f12 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1524 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-04-17stlink: fix connect under reset issuesSpencer Oliver
We need to make sure that srst is asserted before we attempt to switch into jtag or swd mode otherwise we receive a error (-9) - invalid device id. Change-Id: I625166c751cfba8e8a5290f40122bb9afc9dbb39 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1315 Tested-by: jenkins
2012-12-24stlink: print target voltage if supportedSpencer Oliver
The stlink/v2 has the ability to check the target voltage if the firmware is recent enough (>= J13). As a debugging aid we check the voltage at startup and issue an error if this is too low to debug reliably. Change-Id: I98e251f3880e31049c4307051c30bedd3451cf87 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/980 Tested-by: jenkins
2012-12-24stlink: add generic open error routineSpencer Oliver
Change-Id: I1cd18896ab2a37255471a2d160befed8dd8fb544 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/979 Tested-by: jenkins
2012-12-23hla: add ability to configure read/write buffer sizeSpencer Oliver
Other adapters (TI ICDI) that use this driver can use a larger read/write buffer size than the original stlink could. Change-Id: I9beb7748049097cbe29a2340799c450bd74e199d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/948 Tested-by: jenkins
2012-12-23target: add deprecated target name supportSpencer Oliver
This enables us to change the target name without breaking any target scripts. Change-Id: I635f961e573264d3dab2560f3a803ef1986ccfde Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/919 Tested-by: jenkins
2012-12-23stlink: print version infoSpencer Oliver
Print stlink info always rather than just when debug log enabled. Change-Id: I2a29ef046925200e1c94624280c0b252fab5219a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/925 Tested-by: jenkins
2012-11-23stlink: format src definesSpencer Oliver
Change-Id: I7c3fd6e84681e007f1983ad9b8c85369cf9f3ba1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/978 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-08-29stlink: improve swd hardware resetSpencer Oliver
Treat SWD wait result as success, otherwise hardware reset will sometimes fail. Change-Id: I0dbdbe9e75924fe0dde547a72883c60c3db7b15e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/799 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-19stlink: add myself to copyright headerSpencer Oliver
Change-Id: I39e23b38ee630b80bccb5ff6b5819efa0fcb120a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/651 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14stlink: fix stlink api2 single stepSpencer Oliver
This makes the newer v2 api behave as per the v1 api, eg. single stepping masks all interrupts. A better long term solution is to use same behaviour as a cortex-m3 target, see CORTEX_M3_ISRMASK_AUTO. Change-Id: Iaf9f9adf225cf274faaac938050bb996582aa98f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/621 Tested-by: jenkins
2012-05-14stlink: add stlink_api cmdSpencer Oliver
This enables the manual selection of the stlink api version. Change-Id: I0ec8c5b0a101b6456f426d2fec65971da56db4e7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/617 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14stlink: stlink/v1 use v2 api if supportedSpencer Oliver
The api v2 is supported on the stlink/v1 if it has a least v11 firmware. Change-Id: Idfdb5a7f5a5881326017451ae9b6004eeaa46a96 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/616 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-04-30stlink: export write_debug_regSpencer Oliver
Change-Id: I3944911d4a71dba4af48470ceb3e4850784a0e7d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/580 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30stlink: add hardware srst functions to stlink/v2Spencer Oliver
Change-Id: Ib82b6a1116b9f396f1933cc5526733334254fd62 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/579 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-04-30stlink: default to latest api availableSpencer Oliver
Change-Id: Ic04128f4020055587bb87250f41e5c804d9c2b01 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/577 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30stlink: add improved STLINK_JTAG_API_V2 supportSpencer Oliver
The STLINK/V2 supports two api's. This completes the support so STLINK_JTAG_API_V2 is usable. Support for hardware srst still needs adding. Change-Id: Ic4d0499be2a225d18abf96fd6f5ce5e295fb1f37 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/561 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30stlink: support stlink api resultSpencer Oliver
The stlink api does support results for some functions - add support. Change-Id: I39cb495408c46af8bc343b198a1e0bd4c7aee6d8 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/560 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-13stlink: correctly format printed hex addressesSpencer Oliver
Change-Id: I4a139989927249bb5e9dcc4804965c85c37cc09b Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/559 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-03-14stlink: fix alignment build warningAlexandre Pereira da Silva
The {read,write}_mem32 interface functions was asking a 32 bits buffer but they don't need 32 bits alignment. This will change the interface to a 8 bits buffer to remove the alignment mismatch warning. This was causing build errors on platforms with strict aliasing rules. Change-Id: I338be8df5686f07a64ddb4f17c1bb494af583999 Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Reviewed-on: http://openocd.zylin.com/483 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14Automatically prepend v1 mass storage protocol.Mathias K
This patch prepend the v1 mass storage protocol to the command buffer and simplify the usb read/write handling. Change-Id: I709602600e93cd1eb5848fa9f4d15659ba85eb35 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/506 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I24ef9f2dda284e041dc4a532b59968a77eebe702 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/498 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: code cleanupSzymon Modzelewski
This patch moves the bulk of the stlink read/write code into the stlink_usb_xfer set of functions and implements stlink_usb_recv in terms of the generic stlink_usb_xfer stlink_usb_xfer will be needed to implement stlink_usb_send without code duplication stlink_usb_xfer: -sends the stlink command -performs a read or write (as requested) -checks the status (v1 only) Change-Id: I0137d52620bd4883d46c9977a9e73f67622000a1 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/477 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29stlink-v1: fix memory writesSzymon Modzelewski
implement stlink_usb_send and use it to fix stlink_usb_write_mem using two calls to stlink_usb_recv is inappropriate since each call issues a SG command on stlink-v1, resulting in errors Change-Id: I52ff9ee8f5d9ae0d47356477468eb98952205c99 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/478 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-17stlink: add error status checkMathias K
This patch add the status check. Change-Id: I0fdb9bf66dad5ae416c7aa4c6e19116f846571f9 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/463 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 08:03:26 +0000