aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/drivers/jlink.c
AgeCommit message (Collapse)Author
2012-06-26J-Link: Initialize .transports to suppress warning.Alexander Osipenko
jtag_interface.transports field was left uninitialized, which triggers warning message on program startup. Although hardware natively supports SWD interface, no software support currently present, so the value choosen to be <jtag_only>. Change-Id: I2da41790b1850950af416cec4362d5b7bf927b2b Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/670 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link: Forcibly select JTAG transportAlexander Osipenko
Some versions of Segger's software do not select JTAG interface by default. Do it in the intial setup. Firmware version check code still present, with updated set of unsupported. Note from Segger: Alright, we were not aware of that OpenOCD does not select the interface before it starts communicating with the target. A debugger should always select the appropriate target interface before it starts communicating with the target, since otherwise it could also happen that a previous session with another debugger had selected SWD and the interface was not switched again by OpenOCD. Change-Id: I5b4eab7e0e3625ec32be75a36d89e16d17e899bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/667 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26JLink: added jlink_usb_io() functionAlexander Osipenko
jlink_usb_io() function added for basic communication, since jlink_usb_message() is more specific to JTAG transactions. To verify the patch issue "jlink config" command. Change-Id: Id7d10bd5e8985d4c77f2e0ca47fb6033db2877bf Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/679 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-06-26J-Link Unsupported firmware version checkAlexander Osipenko
OpenOCD does not work with the latest firmware versions of Segger J-Link. Latest working version: V4.42c Unsupported versions: 4.44 to 4.46f, 4.20 to 4.30 Older versions of firmware can be found here: http://www.segger.com/j-link-older-versions.html The firmware versions does not correspond directly with "Software and documentation pack for Windows", it may be distinguished by the "compile" date in the information string. Print an warning message if unsupported firmware version detected. Change-Id: Id7d1f965b8ce2fdbcd0026a85ddd093e2fa48720 Signed-off-by: Alexander Osipenko <sipych@gmail.com> Reviewed-on: http://openocd.zylin.com/666 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-06build: cleanup src/jtag/drivers directorySpencer Oliver
Change-Id: I99c08ec0132d5a15250050e718310f1ddd9fe546 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/425 Tested-by: jenkins
2011-12-12jlink libusb-1.0 driver.Mauro Gamba
jlink modified to use the new usb abstaction layer. During the configuration process we can select if use libusb0 or libusb-1.0 library for this driver. Change-Id: I70bc9ee2f89b7597e0f64ea80cad7f1b9070f01b Signed-off-by: Mauro Gamba <maurillo71@gmail.com> Reviewed-on: http://openocd.zylin.com/236 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-05-01adapter speed: require init script setting and centralize activation from ↵Jonas Hörberg
drivers to core.c Signed-off-by: Jonas Hörberg <jhorberg@sauer-danfoss.com>
2011-04-09jlink: jlink_debug_buffer use inline function when _DEBUG_USB_COMMS_ not defineJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add Emulator configuration supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add detect hw typeJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: use tap buffer as 2kJean-Christophe PLAGNIOL-VILLARD
as said in the datasheet Section 3.3.2 Organization of buffers All buffers are big enough to hold 2 KByte of data. this will double the speed of download Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-13jlink: add capability dumper and commandJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-03-02jlink: add jlink_pid to specify the pid to useJean-Christophe PLAGNIOL-VILLARD
this will allow us to use multiple jlink at the same time as when the USB-Address is specified the PID change from 0x0101 to (0x101 + usb_adress) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: switch commands to subcommandsJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: harmonise the device name to J-LinkJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-03-02jlink: add new PID and VIDJean-Christophe PLAGNIOL-VILLARD
The default pid of the segger is 0x0101 But when you change the USB Address it will also pid = ( usb_address > 0x4) ? 0x0101 : (0x101 + usb_address) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-02-23jlink: set the speed at JLINK_MAX_SPEED when an exceeded speed is requestedJean-Christophe PLAGNIOL-VILLARD
it will allow to be at the highest speed of the jlink without touching the board or cpu config tested on sam-ice v5 and at91rm9200-ek Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Patrice Vilchez <patrice.vilchez@atmel.com>
2011-01-05nit: do not add \n at end of LOG_ERROREric Wetzel
Fixed in many other places, and submitted in response to Øyvind's invitation.
2010-12-08jtag: getting the JTAG speed can failØyvind Harboe
If the JTAG speed has not been set, then it has no defined value, add code to propagate the error. No change to actual behavior as no new failure paths have been introduced. This is a no-op patch to make subsequent patches smaller. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-10-10add JLINK protocol doc refDavid Brownell
Provide URL for a recent version of JLINK protocol. Signed-Off-By: David Brownell <dbrownell@users.sourceforge.net>
2010-06-17jlink: fix -Wshadow warningAntonio Borneo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-07jtag: rename JTAG_MOVESTATE to JTAG_TLR_RESETØyvind Harboe
JTAG_MOVESTATE is misleading, this cmd is only used for reset. JTAG_PATHMOVE should be used otherwise. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-03-10JLINK: user info message cleanupSpencer Oliver
- remove trailing LF's from user info messages. - split long lines. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-02-04JLink: reference protocol documentationDavid Brownell
Segger publishes some documentation on this protocol; reference it, so future maintainers can know it exists. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-03JTAG/drivers: cleanup jtag_interface structsDavid Brownell
Get rid of excess indents. Ditto superfluous "&" before function pointers. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-11build: fix cygwin build warningsSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2009-12-03change #include "interface.h" to <jtag/interface.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "interface.h" the following form should be used. #include <jtag/interface.h> The exception is from .c files in the same directory.
2009-12-03change #include "commands.h" to <jtag/commands.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "commands.h" the following form should be used. #include <jtag/commands.h> The exception is from .c files in the same directory.
2009-12-02move jtag drivers to src/jtag/driversZachary T Welch
Moves JTAG interface drivers to src/jtag/drivers/, Adds src/jtag/drivers/Makefile.am. Builds libocdjtagdrivers.la. Flattens the rlink driver files into the drivers/ directory, adding the 'rlink_' prefix or '.rlink' suffix as appropriate.
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 15:27:21 +0000