aboutsummaryrefslogtreecommitdiff
path: root/src/jtag/core.c
AgeCommit message (Collapse)Author
2009-11-13command_context_t -> struct command_contextZachary T Welch
Remove misleading typedef and redundant suffix from struct command_context.
2009-11-13jtag_event_callback_t -> struct jtag_event_callbackZachary T Welch
Remove useless typedef and redundant suffix from jtag_event_callback. Add documentation for the structure.
2009-11-13jtag_interface_t -> struct jtag_interfaceZachary T Welch
Remove useless typedef and redundant suffix from struct jtag_interface.
2009-11-13scan_field_t -> struct scan_fieldZachary T Welch
Remove useless structure typedef.
2009-11-13jtag_tap_t -> struct jtag_tapZachary T Welch
Search and destroy the jtag_tap_t typedef. This also cleans up a layering violation, removing the declaration from types.h.
2009-11-09finish removing deprecated/obsolete commandsDavid Brownell
It's been about a year since these were deprecated and, in most cases, removed. There's no point in carrying that documentation, or backwards compatibility for "jtag_device" and "jtag_speed", around forever. (Or a few remnants of obsolete code...) Removed a few obsolete uses of "jtag_speed": - The Calao stuff hasn't worked since July 2008. (Those Atmel targets need to work with a 32KHz core clock after reset until board-specific init-reset code sets up the PLL and enables a faster JTAg clock.) - Parport speed controls don't actually work (tops out at about 1 MHz on typical HW). - In general, speed controls need to live in board.cfg files (or sometimes target.cfg files), not interface.cfg ... Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-26JTAG: simple autoprobingDavid Brownell
This patch adds basic autoprobing support for the JTAG scan chains which cooperate. To use, you can invoke OpenOCD with just: - interface spec: "-f interface/...cfg" - possibly with "-c 'reset_config ...'" for SRST/TRST - possibly with "-c 'jtag_khz ...'" for the JTAG clock Then set up config files matching the reported TAPs. It doesn't declare targets ... just TAPs. So facilities above the JTAG and SVF/XSVF levels won't be available without a real config; this is almost purely a way to generate diagnostics. Autoprobe was successful with most boards I tested, except ones incorporating C55x DSPs (which don't cooperate with this scheme for IR length autodetection). Here's what one multi-TAP chip reported, with the "Warn:" prefixes removed: clock speed 500 kHz There are no enabled taps. AUTO PROBING MIGHT NOT WORK!! AUTO auto0.tap - use "jtag newtap auto0 tap -expected-id 0x2b900f0f ..." AUTO auto1.tap - use "jtag newtap auto1 tap -expected-id 0x07926001 ..." AUTO auto2.tap - use "jtag newtap auto2 tap -expected-id 0x0b73b02f ..." AUTO auto0.tap - use "... -irlen 4" AUTO auto1.tap - use "... -irlen 4" AUTO auto2.tap - use "... -irlen 6" no gdb ports allocated as no target has been specified The patch tweaks IR setup a bit, so we can represent TAPs with undeclared IR length. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-25JTAG: jtag_tap_init() bugfixesDavid Brownell
Stop allocating three bytes per IR bit, and cope somewhat better with IR lengths over 32 bits. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-19jtag_add_statemove() always uses TLR to get to RESETDavid Brownell
As decided a while back, this isn't a transition we want to chance. Whenever someone wants to got to RESET, force it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-14portability updatesDavid Brownell
Based on some patches from <redirect.slash.nil@gmail.com> for preliminary Win64 compilation. More such updates are needed, but they need work. Compile tested on 64 and 32 bit Linuxes, and Cygwin. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-10printf format warning fixesDavid Brownell
Observed on a Cygwin build. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-09add documentation about reset customizationDavid Brownell
We added two overridable procedures; document them, and the two jtag arp_* operations they necessarily expose. Update the comment about the jtag_init_reset() routine; it's been obsolete for as long as it's had SRST support. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08minor JTAG init messaging tweaksDavid Brownell
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08prevent abort via polling during jtag_resetDavid Brownell
Observed: openocd: core.c:318: jtag_checks: Assertion `jtag_trst == 0' failed. The issue was that nothing disabled background polling during calls from the TCL shell to "jtag_reset 1 1". Fix by moving the existing poll-disable mechanism to the JTAG layer where it belongs, and then augmenting it to always pay attention to TRST and SRST. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-08Stop ignoring most scan chain validation errorsDavid Brownell
Among other things this causes startup errors to kick in the fallback "reset harder" logic during server startup. Comments are also updated a bit, explaining what the various error paths signify (in at least my observation). There's one class of validation error that we can still plausibly ignore: when wrong IDCODE values are observed. This change seems to have helped make an OMAP5912 behave much more reliably. There's still some post-reset flakiness, but it's unrelated to scan verification. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-10-07Force sane SRST and TRST initializationdbrownell
At least some FT2232 based adapters don't necessarily come up in the expected state, with SRST and TRST disabled. Since other adapters could suffer the same problem, let's avoid needing to patch every driver and just force *all* adapters to initialize those values properly at server startup. git-svn-id: svn://svn.berlios.de/openocd/trunk@2824 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Better fix for TAPs violating the JTAG spec for IR-Capture.dbrownell
Instead of just assuming all IDCODE-deprived TAPs violate the JTAG spec (they don't!), just require TAPs with such problems to be declared with proper ircapture/irmask values. Example, with mask and value of zero. git-svn-id: svn://svn.berlios.de/openocd/trunk@2823 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-07Do not check ir capture if there is no IDCODEoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2812 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-06Introduced jtag_init and "jtag arp_init" to allow target scripts more ↵oharboe
control over how OpenOCD starts up and initializes the target. git-svn-id: svn://svn.berlios.de/openocd/trunk@2805 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Improve jtag_validate_ircapture() diagnostics.dbrownell
Bugfix the error message so it shows the disliked value, and add a debug message showing each TAP's IR capture value, all N bits. This just changes diagnostics ... it still ignores the parameters given to us at TAP declaration time. git-svn-id: svn://svn.berlios.de/openocd/trunk@2801 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-10-05Add a new JTAG "setup" event; use for better DaVinci ICEpick support.dbrownell
The model is that this fires after scanchain verification, when it's safe to call "jtag tapenable $TAPNAME". So it will fire as part of non-error paths of "init" and "reset" command processing. However it will *NOT* trigger during "jtag_reset" processing, which skips all scan chain verification, or after verification errors. ALSO: - switch DaVinci chips to use this new mechanism - log TAP activation/deactivation, since their IDCODEs aren't verified - unify "enum jtag_event" scripted event notifications - remove duplicative JTAG_TAP_EVENT_POST_RESET git-svn-id: svn://svn.berlios.de/openocd/trunk@2800 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29Streamline Capture-IR validation codedbrownell
- Don't issue needless JTAG resets ... only do them after errors. Normal exit now leaves every TAP in BYPASS. - Fix an unlikely memory leak on one fault path. - Remove the oddball limitation that invalid capture LSBs trigger errors only for TAPs that support IDCODE. Re the JTAG reset: there are too many of them, and they can (and do!) change system state. So the needless ones should get removed. This one was especially pointless. git-svn-id: svn://svn.berlios.de/openocd/trunk@2777 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29Make "-expected-id 0" suppress warnings; not unlike it used to do.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2775 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-29added t/nsrst_assert_width commandsoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2768 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26Diagnostics tweaks for jtag_examine_chain() failure paths.dbrownell
git-svn-id: svn://svn.berlios.de/openocd/trunk@2760 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-26Updates to the initial scanchain validation code:dbrownell
- minor bug fixes - code cleanup - update comments - improve diagnostics - etc git-svn-id: svn://svn.berlios.de/openocd/trunk@2759 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-21Update the jtag-examine_chain() logic to verify that there's nodbrownell
garbage after the expected data (from the TAPs' BYPASS or IDCODE registers). NOTE that there was previously some code that looked like it was trying to do this ... which didn't work, because it was looping over the list of expected TAPs, and never checked *after* that list completed! That could hide some *nasty* reset issues... Also replace a now-obsolete scanchain length test with one that behaves correctly; and update reporting of unexpected IDCODEs. git-svn-id: svn://svn.berlios.de/openocd/trunk@2739 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-20Debug message updates:dbrownell
- Shrink messaging during resets, primarily by getting rid of "nothing happened" noise that hides *useful* information. - Improve: the "no IDCODE" message by identifying which tap only supports BYPASS; and the TAP event strings. Related minor code updates: - Remove two needless tests when examining the chain: we know we have a TAP, and that all TAPs have names. - Clean up two loops, turning "while"s into "for"s which better show what's actually being done. git-svn-id: svn://svn.berlios.de/openocd/trunk@2736 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-19Minor behavior fixes for the two JTAG reset events (C/internal,dbrownell
and Tcl/external): - Reorder so *both* paths (TCK/TMS or TRST) can enable TAPs with ICEpick ... first C code flags TAPs that got disabled, then call any Tcl code that might want to re-enable them. - Always call the C/internal handlers when JTAG operations can be issued; previously that wasn't done when TRST was used. Plus some small cleanups (whitespace, strings, better messaging during debug and on some errors) to reset-related code. git-svn-id: svn://svn.berlios.de/openocd/trunk@2730 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-17Address codereview comment from Steve Grubb <sgrubb@redhat.com>:dbrownell
avoid a duplicate test. Plus other cleanup in the same code: be "static", sane line lengths for source and diagnostics, and fix misleading variable names. git-svn-id: svn://svn.berlios.de/openocd/trunk@2725 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-09-11tap post reset event added. Allows omap3530 to send 100 runtest idle ↵oharboe
tickle's after a TAP_RESET. git-svn-id: svn://svn.berlios.de/openocd/trunk@2696 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26David Brownell <david-b@pacbell.net> Fix segv in jtag_examine_chain(): exit ↵oharboe
loop on no-tap. Keep "next iteration" step with the rest of the loop overhead. Cleanup: remove spurious whitespace, and an overlong line; only assign "tap->hasidcode" once. git-svn-id: svn://svn.berlios.de/openocd/trunk@2631 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26added missing check on jtag_executeoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2630 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-26reduce arm11 output noiseoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2628 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe
Unify the handling of the req_srst parameter, and rip out a large NOP branch and its associated FIXME. (There didn't seem to be anything that needs fixing; but that was unclear since the constraints were scattered all over the place not unified.) git-svn-id: svn://svn.berlios.de/openocd/trunk@2623 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> More jtag_add_reset() cleanup:oharboe
Unify the handling of the req_tlr_or_trst parameter. Basically, JTAG TMS+TCK ops ("TLR") is always used ... unless TRST is a safe option in this system configuration. git-svn-id: svn://svn.berlios.de/openocd/trunk@2622 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-25David Brownell <david-b@pacbell.net> Some jtag_add_reset() cleanup:oharboe
- Track whether TRST and/or SRST actually change: * If they're not changing, don't ask the JTAG adapter to do anything! (JTAG TCK/TMS ops might still be used to enter TAP_RESET though.) * Don't change their recorded values until after the adapter says it did so ... so fault paths can't leave corrupt state. * Detect and report jtag_execute_queue() failure mode * Only emit messages saying what really changed; this includes adding an omitted "deasserted TRST" message. * Only apply delays after deasserting SRST/TRST if we *DID* deassert! - Messages say "TLR" not "RESET", to be less confusing; there are many kinds of reset. (Though "TLR" isn't quite ideal either, since it's the name of the TAP state being entered by TMS+TCK or TRST; it's at least non-ambiguous in context.) So the main effect is to do only the work this routine was told to do; and to have debug messaging make more sense. git-svn-id: svn://svn.berlios.de/openocd/trunk@2621 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-24Jonas Horberg <jhorberg@sauer-danfoss.com> oharboe
The trunk is currently broken for interfaces without the speed_div function (interface specific clock speed value to kHz conversion). Example: parport. git-svn-id: svn://svn.berlios.de/openocd/trunk@2605 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-08-18Jonas Horberg [jhorberg@sauer-danfoss.com]ntfreak
Change jtag_rclk behaviour so it can be called before the interface init function git-svn-id: svn://svn.berlios.de/openocd/trunk@2590 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-07-17Andreas Fritiofson <andreas.fritiofson@gmail.com> UTF8 fixesoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@2549 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-29David Brownell <david-b@pacbell.net>:zwelch
Warn when people (or scripts) use numeric identifiers for TAPs, instead of dotted.name values. We want this usage to go away, so that for example adding more TAPs doesn't cause config scripts to break because some sequence number changed. It's been deprecated since late 2008, but putting a warning on this should help us remove it (say, in June 2010) by helping to phase out old (ab)usage in config scripts. Other than in various config files, the only code expecting such a number was the almost unused str9xpec driver. This code was changed to use the TAP it was passed, instead of making its own dubious lookup and ignoring that TAP. git-svn-id: svn://svn.berlios.de/openocd/trunk@2415 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace at end of lines, step 2.zwelch
- Replace '\s*$' with ''. git-svn-id: svn://svn.berlios.de/openocd/trunk@2380 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Replace '){' with ') {'.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2378 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs before ')'.zwelch
- Replace '[ \t]*[)]' with ')'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2377 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23Remove whitespace that occurs after '('.zwelch
- Replace '([ \t]*' with '('. git-svn-id: svn://svn.berlios.de/openocd/trunk@2376 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '=' whitespacezwelch
- Replace ')\(=\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(=\)(' with '\1 \2 ('. - Replace '\(\w\)\(=\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2372 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '==' whitespacezwelch
- Replace ')\(==\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(==\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '&&' whitespacezwelch
- Replace ')\(&&\)(' with ') \1 ('. - Replace '\(\w\)\(&&\)(' with '\1 \2 ('. - Replace '\(\w\)\(&&\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2366 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Fixes '!=' whitespacezwelch
- Replace ')\(!=\)\(\w\)' with ') \1 \2'. - Replace '\(\w\)\(!=\)(' with '\1 \2 ('. - Replace '\(\w\)\(!=\)\(\w\)' with '\1 \2 \3'. git-svn-id: svn://svn.berlios.de/openocd/trunk@2363 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-23- Replace 'for(' with 'for ('.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2360 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 11:46:11 +0000