aboutsummaryrefslogtreecommitdiff
path: root/src/helper/command.c
AgeCommit message (Collapse)Author
2017-10-23Fix GCC7 warnings about switch-case fallthroughsFreddie Chopin
GCC7 with -Wextra warns about switch-case blocks which fallthrough with "this statement may fall through [-Werror=implicit-fallthrough=]". This can be fixed by adding "special" comments: "/* fallthrough */". See https://gcc.gnu.org/gcc-7/changes.html Change-Id: Iba0be791dbdd86984489b2d9a0592bb59828da1e Signed-off-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-on: http://openocd.zylin.com/4174 Tested-by: jenkins
2017-02-10target: Add 64-bit target address supportDongxue Zhang
Define a target_addr_t type to support 32-bit and 64-bit addresses at the same time. Also define matching TARGET_PRI*ADDR format macros as well as a convenient TARGET_ADDR_FMT. In targets that are 32-bit (avr32, nds32, arm7/9/11, fm4, xmc1000) be least invasive by leaving the formatting unchanged apart from the type; for generic code adopt TARGET_ADDR_FMT as unified address format. Don't silently change gdb formatting here, leave that to later. Add COMMAND_PARSE_ADDRESS() macro to abstract the address type. Implement it using its own parse_target_addr() function, in the hopes of catching pointer type mismatches better. Add '--disable-target64' configure option to revert to previous 32-bit target address behavior. Change-Id: I2e91d205862ceb14f94b3e72a7e99ee0373a85d5 Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Signed-off-by: David Ung <david.ung.42@gmail.com> [AF: Default to enabling (Paul Fertser), rename macros, simplify] Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Matthias Welwarsky <matthias.welwarsky@sysgo.com>
2016-07-19Fix usage of timeval_ms()Andreas Färber
First, fix the timeval_ms() implementation to not have K&R but ANSI argument semantics by adding a missing void. timeval_ms() returns an int64_t, not uint64_t or long long. Consistently use int64_t for variables and PRI*64 as format string. While at it, change a few related variables to bool for clarity. Note that timeval_ms() may return a negative error code, but not a single caller checks for that. Change-Id: I27cf83e75b3e9a8913f6c43e98a281bea77aac13 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3499 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-24Remove FSF address from GPL noticesMarc Schink
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2015-04-14Tcl exception codes cleanup, shutdown command amendmentsPaul Fertser
This patch might influence openocd Tcl commands behaviour in subtle ways, please give it a nice testing. The idea is that if an OpenOCD Tcl command returns an error, an exception is raised, and then the return code is propogated all the way up (or to the "catch" if present). This allows to detect "shutdown" which is not actually an error but has to raise an exception to stop execution of the commands that follow it in the script. openocd_thread special-cases shutdown because it should then terminate OpenOCD with a success error code, unless shutdown was called with an optional "error" argument which means terminate with a non-zero exit code. Change-Id: I7b6fa8a2e24c947dc45d8def0008b4b007c478b3 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2600 Tested-by: jenkins Reviewed-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-by: Jens Bauer <jens@gpio.dk> Reviewed-by: Oleksij Rempel <linux@rempel-privat.de>
2015-04-14helper: shutdown command should return with 0 exit statusJuha Niskanen
Commit a35712a85c42 caused a regression where command openocd -c "echo a1; shutdown; echo a2" always returned non-zero exit status to operating system, even when commands before shutdown all succeeded. This patch attempt to fix this. Change-Id: I3f478c2c51d100af810ea0171d2fd4c8fcc657f3 Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com> Reviewed-on: http://openocd.zylin.com/2589 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-09-22command: Fix confusing syntax error messageAndreas Fritiofson
If the user executes a command with an invalid subcommand, the error message is extremely unhelpful: > flash write test.elf flash write test.elf: command requires more arguments This is because any command line that starts with a valid command group is classified as a group, triggering ocd_bouncer to print the confusing message. Fix by requiring that to be a command group, the command line must not contain any unknown tokens after the last valid (sub-)command group. That is OK because command groups don't have handlers defined and thus can't take any parameters. Also fix the error message for "unknown" type to be similar to the error message that is printed (by Jim) for non-existent primary commands. Change-Id: I26950349f0909fd3961c4f9ab9b198c221cea9fc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2285 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-09Update to the current Jim TclPaul Fertser
This is a post-release version but hopefully some fixes that went in are worth it; also the changes here make OpenOCD compatible with stock 0.75 version if a distro maintainer decides to use it. Change-Id: I7ad1814c7c4868198475cdca4750c3d0ee4f5f8b Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2121 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2014-01-09command: Fix formatting for empty usage stringAndreas Fritiofson
Introduced by requirement in 54d6330b. Change-Id: If3dba057127b54b15ca7f364f37c6286d34f77e0 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reported-by: Robert P. J. Day <rpjday@crashcourse.ca> Reviewed-on: http://openocd.zylin.com/1858 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Remove unnecessary castsAndreas Fritiofson
Change-Id: Ia97283707282ccccdc707c969f59337313b4e291 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Clean up const usage to avoid excessive castingAndreas Fritiofson
Don't use const on pointers that hold heap allocated data, because that means functions that free them must cast away the const. Do use const on pointer parameters or fields that needn't be modified. Remove pointer casts that are no longer needed after fixing the constness. Change-Id: I5d206f5019982fd1950bc6d6d07b6062dc24e886 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1668 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-09-08build: remove clang warning about global var 'match'Spencer Oliver
remove clang warning - "Argument to free() is the address of a global variable, which is not memory allocated by malloc()". Change-Id: I015273eafc9644207684b363434c6ae8149bfcde Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1613 Tested-by: jenkins
2013-07-01Add support for 64 bit parameter to irscanEvan Hunter
Change-Id: I89e0422456c59ee86c4b6d9bd3b3ad32051b31ac Signed-off-by: Evan Hunter <ehunter@broadcom.com> Reviewed-on: http://openocd.zylin.com/831 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2012-11-30Make NetBSD a recognized systemAymeric Vincent
Change-Id: I7fcb540553da7833a8b6a82335a7296539a8f491 Signed-off-by: Aymeric Vincent <vincent.aymeric@gmail.com> Reviewed-on: http://openocd.zylin.com/998 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-08-24helper: command.c cleanupSpencer Oliver
Change-Id: I66643960e38625e843b5f54d1c072e4eee78284d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/772 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-07-22Revert "When calling openocd from a shell like this:"Alex Austin
This reverts commit e8641695c634109ebf5f1149923971770da1d28a Original premise was wrong. Proper command is "shutdown", not "exit". Change-Id: I07f5fe0dda9c24abe53628da986bfda0e406bb4a Signed-off-by: Alex Austin <alex.austin@spectrumdsi.com> Reviewed-on: http://openocd.zylin.com/757 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-07-11When calling openocd from a shell like this:Stian Skjelsad
openocd -f board/sheevaplug.cfg -c init -c exit the calling shell will believe that openocd exited with an error due to exitval will be non-zero This is not tested against incomming telnet Change-Id: I63d15715a7b46f39a7de261a45039f8c3cad7a98 Signed-off-by: Stian Skjelstad <stian@nixia.no> Reviewed-on: http://openocd.zylin.com/470 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-03-31Add value "openbsd" for ocd_HOSTOS.Wim Lewis
Change-Id: I9b0dd87d85c0792730f507176001d39c44da7117 Signed-off-by: Wim Lewis <wiml@hhhh.org> Reviewed-on: http://openocd.zylin.com/547 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-13ecosboard: delete bit-rotted eCos codeØyvind Harboe
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2012-02-06doxygen: use correct comment syntaxSpencer Oliver
This issue was caused by uncrustify not correctly converting the doxygen comments. Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c Reviewed-on: http://openocd.zylin.com/431 Tested-by: jenkins
2012-02-06build: cleanup src/helper directorySpencer Oliver
Change-Id: I71a312df783995e9083c345c25e73902d5aef59e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/415 Tested-by: jenkins
2012-01-04retire ERROR_INVALID_ARGUMENTS and replace with ERROR_COMMAND_SYNTAX_ERRORØyvind Harboe
Change-Id: I6dee51e1fab1944085391f274a343cdb9014c7a4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/300 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-04command: print BUG warning when usage is missingMathias K
These error messages will prompt patches to be submitted for missing .usage or empty fields. All of the below must be resolved before next release. The Jim defined commands are excluded from this checklist because the help text can be set later than during command registration. strlen(.usage) == 0 means that the command expects no arguments. Updates to this patch in Gerrit to fix problems below are most welcome. Anyone can push updated versions of a patch to Gerrit. If there are no further updates to this patch within a week, it will be pushed to the master branch to prompt more fixes. These were caught by launching OpenOCD. Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out ^C oyvind@fierce:~/openocd$ openocd -c "interface dummy" -f board/at91eb40a.cfg 2>&1 | grep -w BUG Error: BUG: command 'command' does not have the '.usage' field filled out Error: BUG: command 'script' does not have the '.usage' field filled out Error: BUG: command 'power_restore' does not have the '.usage' field filled out Error: BUG: command 'srst_deasserted' does not have the '.usage' field filled out Error: BUG: command 'measure_clk' does not have the '.usage' field filled out Error: BUG: command 'exit' does not have the '.usage' field filled out Error: BUG: command 'shutdown' does not have the '.usage' field filled out Error: BUG: command 'gdb_sync' does not have the '.usage' field filled out Error: BUG: command 'interface_list' does not have the '.usage' field filled out Error: BUG: command 'target' does not have the '.usage' field filled out Error: BUG: command 'target init' does not have the '.usage' field filled out Error: BUG: command 'flash' does not have the '.usage' field filled out Error: BUG: command 'flash init' does not have the '.usage' field filled out Error: BUG: command 'flash banks' does not have the '.usage' field filled out Error: BUG: command 'nand' does not have the '.usage' field filled out Error: BUG: command 'nand drivers' does not have the '.usage' field filled out Error: BUG: command 'nand init' does not have the '.usage' field filled out Error: BUG: command 'pld' does not have the '.usage' field filled out Error: BUG: command 'pld init' does not have the '.usage' field filled out Error: BUG: command 'mflash' does not have the '.usage' field filled out Error: BUG: command 'mflash init' does not have the '.usage' field filled out Error: BUG: command 'dummy' does not have the '.usage' field filled out Error: BUG: command 'dummy foo' does not have the '.usage' field filled out Error: BUG: command 'scan_chain' does not have the '.usage' field filled out Error: BUG: command 'jtag' does not have the '.usage' field filled out Error: BUG: command 'jtag init' does not have the '.usage' field filled out Error: BUG: command 'arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'etm' does not have the '.usage' field filled out Error: BUG: command 'arm7_9' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm' does not have the '.usage' field filled out Error: BUG: command 'arm reg' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu etm' does not have the '.usage' field filled out Error: BUG: command 'at91eb40a.cpu arm7_9' does not have the '.usage' field filled out Error: BUG: command 'target_request' does not have the '.usage' field filled out Change-Id: I2c3e529530a15d2295a1950ffc59e8f2fc661012 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/299 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-03helper: fix arm11 help textSpencer Oliver
This fixes a long standing bug: see Trac #4 Increased help text recursion limit and added LOG_DEBUG so we can catch future errors like this. Change-Id: I5fac95c4486eaddaf1e88a27ecb1835168f87711 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/291 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-03-27command: fix leak when executing commandsØyvind Harboe
found via valgrind, not observed/reported. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-09nit: more LOG_* \n fixesEric Wetzel
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
2010-12-29warnings: use more 'const' for char *Øyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-18script: support only Tcl commentsØyvind Harboe
Only Tcl comments are now supported. For classic style commands comments were supported at the end of the line. Move in the direction of letting the script language decide syntax, rather than have special rules for some commands. Before this patch goes in, the scripts should be updated to use ;# instead of # for end of line comments. > mdw 0 1 2 mdw ['phys'] address [count] zy1000.cpu mdw address [count] Command handler execution failed in procedure 'mdw' > mdw 0 1 #2 mdw ['phys'] address [count] zy1000.cpu mdw address [count] Command handler execution failed in procedure 'mdw' > mdw 0 1 ;#2 0x00000000: ffffffff > mdw 0 1 0x00000000: ffffffff > mdw 0 0x00000000: ffffffff Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-09JIM: document "echo" commandAntonio Borneo
Document "-n" option in manual; Modify "echo" command definition as COMMAND_HANDLER to easily add help message Add help message aligned with manual. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-11-09JIM: Add "-n" option to "echo"Antonio Borneo
With the new JIMTCL, "puts" only writes to stdout. To write on telnet port too, "echo" must be used. This patch gives to "echo" similar commandline option of "puts". Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-10-29jim tests: use installedØyvind Harboe
Delete obsolete jim that comes with OpenOCD.
2010-10-27help: help now works on configuration commandsØyvind Harboe
help would not show help for commands when the command interpreter was in the wrong mode, which means that e.g. "help newtap" didn't work, it wouldn't show the "jtag newtap" help as it was a configuration command. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20helper: fix flaky capture commandØyvind Harboe
capture of progress output would get polling results. This will break in the example below where polling output would override the tcl return value. capture {sleep 10000; set abc def} Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-11command: capture command now handles both types commandsØyvind Harboe
Commands that output progress output and no return value will have the progress output captured. Commands that do not output progress output(tcl commands) will return the tcl return value instead. The advantage here is that it is no longer necessary to consider which command one is capturing, it works for either. Example #1: capture progress output: set foo [capture help] Example #2: capture tcl return value set foo [capture {set abc def}] Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-18don't add confusing source info to JimAndreas Fritiofson
When an interactive command fails, the Jim stack trace prints references to the line in "command.c" where the interpreter was invoked. Since that location has no relation to the actual command that failed, the information serves only to add confusion. By not adding the useless source info to Jim the noise can be reduced, while still printing a useful trace for nested commands. Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-05command context: fix errors when running certain commands on startupØyvind Harboe
Various commands, e.g. "arm mcr xxxx" would fail if invoked upon startup since it there was no command context defined for the jim interpreter in that case. A Jim interpreter is now associated with a command context(telnet, gdb server's) or the default global command context. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-02-04CMD: duplicate cmd error msgSpencer Oliver
When registering cmds we report duplicate attempts to register a cmd as a LOG_ERROR. Some situations need this, such as when registering dual flash banks. http://www.mail-archive.com/openocd-development@lists.berlios.de/msg11152.html Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-13debug: make logging of commands terserØyvind Harboe
one line / command instead of one line per argument. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-01-11commands: make error messages a bit more terseØyvind Harboe
we don't need to know the build path of command.c when reading normal user level error messages. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-01-10FreeBSD build fixesDavid Brownell
Based on notes from Tomek Cedro <tomek.cedro@gmail.com> and Steve Franks <bahamasfranks@gmail.com>. In the User's Guide, sort the list of operating systems reported through Tcl with $ocd_HOSTOS ... and include FreeBSD. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09src/helper: usage/help updatesDavid Brownell
Make "usage" messages use the same EBNF as the User's Guide; no angle brackets. Improve and correct various helptexts. Don't use "&function"; a function's name is its address. Fix some whitespace glitches, shrink a few overlong lines. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09buildfix on MacOSMasaki Muranaka
Recent Apple gcc versions use __APPLE__ instead of __DARWIN__; accept that too. Also use #warning, not #warn; neither is standard, but most CPP versions require it to be spelled out. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02streamline and document helptext mode displaysDavid Brownell
Most commands are usable only at runtime; so don't bother saying that, it's noise. Moreover, tokens like EXEC are cryptic. Be more clear: highlight only the commands which may (also) be used during the config stage, thus matching the docs more closely. There are - Configuration commands (per documentation) - And also some commands that valid at *any* time. Update the docs to note that "help" now shows this mode info. This also highlighted a few mistakes in command configuration, mostly commands listed as "valid at any time" which shouldn't have been. This just fixes ones I noted when sanity testing. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02Fix usage/help search for subcommands.Dean Glazeski
This makes it so that the usage/help command properly uses the whole command, including subcommand, in the search for help information. This previously caused erroneous output from the usage command handler. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-02Add the current command to the command informationDean Glazeski
I wanted to make it so I can be ignorant of a commands invocation string, so I tried to use CMD_CURRENT (aka cmd->current) which is supposed to house a pointer to the current command.  It turns out that this wasn't being set. This patch adds the current command structure to the command invocation structure before sending it along to the command handler. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-21help: list all commands that match stringOyvind Harboe
Restore behavior where help lists all commands that match string passed to help. Signed-off-by: Oyvind Harboe <oyvind.harboe@zylin.com>
2009-12-03change #include "target.h" to <target/target.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "target.h" the following form should be used. #include <target/target.h> The exception is from .c files in the same directory.
2009-12-01command: the Jim interpreter can now be provided rather than createdØyvind Harboe
In embedded hosts, the Jim interpreter can come from the existing context rather than be created by OpenOCD. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-11-30improve command prohibition error reportZachary T Welch
Ensures that the correct information gets displayed, depending on the mode of the command being denied. Fixes misreporting all commands as needing to run "before 'init'".
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 10:18:28 +0000