aboutsummaryrefslogtreecommitdiff
path: root/src/helper/Makefile.am
AgeCommit message (Collapse)Author
2016-12-08Convert to non-recursive makeAndreas Fritiofson
Change-Id: I11f8bc8553957e2ff083c09e72e16881e4d3bb6f Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3865 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-01-22helper: Add converter from JEP106 ID to manufacturer nameAndreas Fritiofson
Use it to print the manufacturer of detected TAPs Change-Id: Ic4384c61c7f6f7ae2a9b860a805a5997542f72cc Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3177 Tested-by: jenkins Reviewed-by: Jiri Kastner <cz172638@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-08-02Provide od+sed replacement for the bin2char helperPaul Fertser
Using custom build-time tools is always more problematic, especially for cross-compiling. This alternative implementation assumes "od" (IEEE Std 1003.1-2001) and sed are available which should be the case for any reasonably modern system. Change-Id: I0208f475648c78e7dca127ff4bab60d314b2bf53 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2139 Tested-by: jenkins Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-09-13libusb: require pkg-config supportPaul Fertser
An alternative approach to show how much cleaner the pure pkg-config way is. This changes the discovery procedures for libusb-1.0 and libusb-0.1, making them depend on pkg-config being properly installed and configured, including the necessary build host configuration for the cross-builds (see http://www.flameeyes.eu/autotools-mythbuster/pkgconfig/cross-compiling.html) It should make it possible to compile OpenOCD without changes and extra effort on GNU/Linux, FreeBSD users would need to supply a .pc file for their libusb implementation or add LIBUSB1_LIBS and LIBUSB1_CFLAGS to the configure environment. Change-Id: I826e378dd1e0d101a549a573b2c63212a7e00b64 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1467 Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-07-06Add a bit-level transfer queueAndreas Fritiofson
Interface drivers regularly need to keep track of where each part of a long read buffer should be copied, once that data arrives. Both source and destination are often at an arbitrary bit offset. This queued bit-level copy can help with that, by allowing the driver to perform postponed reads from the receive buffer already when building the transmit buffer, and have those reads executed at a later time when data is available. For simplicity, it uses the linked list implementation list.h imported from the Linux kernel. Change-Id: I06862a0a6f057cbbcacfb021f17a795195faded2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/450 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Peter Stuge <peter@stuge.se>
2012-03-13ecosboard: delete bit-rotted eCos codeØyvind Harboe
Change-Id: Iff7943eb9da3f41dcc45492acd0f36cf63b3497f Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/503 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins
2011-09-30jim-nvp is moving from jimtcl to openocdSteve Bennett
The jim-nvp code is specific to openocd, so it belongs in openocd, not in the core jimtcl. Signed-off-by: Steve Bennett <steveb@workware.net.au>
2010-11-18build: add common.mkSpencer Oliver
Rather than specifying common makefile variables move them all to a common.mk. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-10-29jim tests: use installedØyvind Harboe
Delete obsolete jim that comes with OpenOCD.
2010-08-01util: ms command to calculate length of operationsØyvind Harboe
This can be used to calculate approximate RTCK frequency for instance. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-17helper: remove helper membufAntonio Borneo
Helper is now unused. Can be removed. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2009-12-16ecos: crisper implementation of timeval_ms()Øyvind Harboe
A crisper/faster implementation under eCos that makes profiling a tad easier. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-08build: add build/src to include pathØyvind Harboe
This allows including generated include files. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2009-12-03remove tertiary include pathsZachary T Welch
With all #include directives converted, we only need to have the top-level src/ directory in the search path.
2009-12-03allow #include directives to use module nameZachary T Welch
Includes the src directory in the search path, so header files may be migrated from: #include "foo.h" to #include <module/foo.h> which is more conducive for installation.
2009-12-02remove BUILD_IOUTIL symbolZachary T Welch
Add ioutil_stubs.c to provide an empty ioutil_init() routine. Add ioutil.h to prevent applications from needing to declare it. Allows unconditionally calling that function during startup, and the resulting libocdhelper library API is now more stable. Prints a DEBUG message when the stub implementation is included.
2009-11-18split startup.tcl file across modulesZachary T Welch
Moves definitions for each layer into their own file, eliminating layering violations in the built-in TCL code. Updates src/Makefile.am rules to include all files in the final startup.tcl input file, and others Makefile.am rules to distribute the new files in our packages.
2009-11-18move startup.c to libopenocdZachary T Welch
Moves the creation of startup_tcl.c from src/helper/ to src/. Prepares to split the startup.tcl file into its per-module parts.
2009-10-16xscale: better fix for debug_handler.binDavid Brownell
Generate a C struct with the data, and use that, instead of an assembly language file. The assembly language causes issues on Darwin and MS-Windows, which don't necessarily use GNU AS; or if they do, don't necessarily use its ELF syntax. It's also better in two other ways: fewer global symbols; and the init-time size check gets optimized away at compile time. (Unless it fails, in which case bigger chunks of the file vanish.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-09-21Remove annoying end-of-line whitespace from most src/*dbrownell
files; omitted src/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@2742 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-24Add a growable sprintf memory buffer libraryduane
git-svn-id: svn://svn.berlios.de/openocd/trunk@2381 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-06-09Fix make maintainer-clean for out-of-tree builds.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@2172 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-31Whitespace-only updates to automake input files:zwelch
- use continuations to break long lines of variable assignments - makes these variables more patch-friendly and conform to style guide git-svn-id: svn://svn.berlios.de/openocd/trunk@1970 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-27Update build system to find moved scripts -- Step 3 of 2:zwelch
- Update references from using PKGLIBDIR to PKGDATADIR. - Update built-in script search paths to reflect new install location: - $(pkgdatadir) => $(pktdatadir)/site - $(pkglibdir) => $(pktdatadir)/scripts - Update installed location of httpd files: - $(pkglibdir)/httpd => $(pkgdatadir)/httpd git-svn-id: svn://svn.berlios.de/openocd/trunk@1920 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-11Factor system #includes out of replacements.h into new system.h.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@1702 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-10Extend autotools build to create shared library libopenocd with libtool:zwelch
- Add libtoolize step too bootstrap script; creates ltmain.sh script. - Add AC_PROG_LIBTOOL to configure.in to add libtool support to build. - Change Makefile.am library rules from static (_a) to libtool (_la). - Install libopenocd.{la,so,a} in $(libdir); update openocd link rules. - Extend MAINTAINERCLEANFILES in top-level Makefile.am to remove ltmain.sh. git-svn-id: svn://svn.berlios.de/openocd/trunk@1695 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-10Reverse revision 1691: all of its functionality has migrated elsewhere.zwelch
git-svn-id: svn://svn.berlios.de/openocd/trunk@1694 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-10Revive tclapi.c from r1650:zwelch
* Remove superfluous #include directives. * Fix warnings and API usage to cure its bit rot. * Build into libhelper library (for now). Add tclapi.h to export tclapi_register_commands(). Register tclapi commands in openocd.c:setup_command_handler(). git-svn-id: svn://svn.berlios.de/openocd/trunk@1691 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-05-02Update autotools scripts to require automake 1.6. The configure.in scriptzwelch
already required autoconf 2.59 (circa 2006), so there is no reason to support versions of automake older than 1.6 (circa 2002). The first part of this patch upgrades the configure.in script: 1. Use current calling conventions for the AC_INIT and AM_INIT_AUTOMAKE macros, bringing their usage up-to-date with the version of autoconf already specified by AC_PREREQ. 2. Add AC_CONFIG_SRCDIR macro, required by new version of AC_INIT. 3. Automatically enable all of automake's warnings except Makefile portability (which OpenOCD violates by using GNU make's $(wildcard)). [[ While automake has its own -Werror option, I did not enabled it due to existing warnings. ]] 4. Add the missing AM_PROG_C_O check, required by the build rules for openocd.o in src/Makefile.am. 5. Adjust version number to show progress toward the next release. 6. Include a bug reporting e-mail address to direct users to this list. This patch makes the following adjustments to the Makefile.am files: 1. Update AUTOMAKE_OPTIONS to require automake version 1.6 2. Rewrite all deprecated INCLUDES assignments as AM_CPPFLAGS 3. Clean-up all AM_CPPFLAGS declarations to be patch-friendly. 4. Remove vestigial references to $(all_includes) 5. Remove erroneous references to @CPPFLAGS@ (only use AM_CPPFLAGS) 6. Remove unused -I and -D directives in helper/, flash/, target/ git-svn-id: svn://svn.berlios.de/openocd/trunk@1591 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-04-21- fix signed/unsigned build errors under win32. Thanks Zach Welch ↵ntfreak
<zw@superlucidity.net> git-svn-id: svn://svn.berlios.de/openocd/trunk@1489 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2009-01-20Fix 'make maintainer-clean' courtesy of Zach Welch <zw@superlucidity.net>kc8apf
git-svn-id: svn://svn.berlios.de/openocd/trunk@1345 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-15sync up to tap_xxx rename + add with-ioutil for standalone openocd ↵oharboe
implemetnations git-svn-id: svn://svn.berlios.de/openocd/trunk@1243 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-15- add ability for openocd to communicate to gdb using pipes (stdin/stdout).ntfreak
- this is enabled by new command line option option --pipe. git-svn-id: svn://svn.berlios.de/openocd/trunk@1242 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-12-01"Theodore A. Roth" <taroth@gmail.com> fixes to distcheckoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@1199 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-11place event loop inside #ifdef JIM_EMBEDDED. oharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@903 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-08-07David Kuehling <dvdkhlng@gmx.de> - added jim-eventloop.coharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@898 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-22Spen: startup.tcl cross compile supportoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@856 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-21cross compile fixoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@848 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-18- fix incorrectly registered function openocd_array2memntfreak
- removed unused variables - reformatted lpc288x.[ch] - fixed helper/Makefile.am dependencies - add correct svn props to added files git-svn-id: svn://svn.berlios.de/openocd/trunk@829 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-17Charles Hardin <ckhardin@gmail.com> move jim into helperoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@822 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11work in progress to improve helpoharboe
git-svn-id: svn://svn.berlios.de/openocd/trunk@792 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-07-11- retired variable stuff. oharboe
- drscan is now a low level tcl command: execute DR scan <device> <num_bits> <value> <num_bits1> <value2> - removed obsolete partial command text support git-svn-id: svn://svn.berlios.de/openocd/trunk@791 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-03-11reduce compare noise. If someone should be crazy enough to try to run ↵oharboe
OpenOCD under eCos, then they'v got some hooks to point them in the general direction. git-svn-id: svn://svn.berlios.de/openocd/trunk@499 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-28- added svn propsntfreak
- fixed mixed line endings on flash.c, log.c, gdb_server.c git-svn-id: svn://svn.berlios.de/openocd/trunk@371 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24move options handling to separate file to better support embedded ↵oharboe
implementations of OpenOCD git-svn-id: svn://svn.berlios.de/openocd/trunk@334 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-24- added -c option that will execute an openocd commandoharboe
- added at91eb40a target library example. git-svn-id: svn://svn.berlios.de/openocd/trunk@333 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2008-02-19- add search paths via new arg -s (-search). Thanks Ted Rothntfreak
- updated docs for new command git-svn-id: svn://svn.berlios.de/openocd/trunk@312 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-03-15- reworked file i/o. every fileaccess (target, flash, nand, in future ↵drath
configuration, too) should now go through the fileio subsystem - added support for reading IHEX files (through fileio) - load/dump_binary renamed to the more generic load/dump_image <file> <address> ['bin'|'ihex'] - added NAND framework (preliminary) - added support for the LPC3180 SLC and MLC NAND controllers (preliminary) - fix initialization for parport - gw16012 fixes/cleanups - added EmbeddedICE version 7 (preliminary, reported on two LPC23xx devices so far) - added 'arm7_9 etm <target#>' configuration command to enable access to the ETM registers git-svn-id: svn://svn.berlios.de/openocd/trunk@132 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17- Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 18:54:15 +0000