aboutsummaryrefslogtreecommitdiff
path: root/src/flash
AgeCommit message (Collapse)Author
2007-02-03- add missing parentheses around macro parameters (thanks to Matthias Bauch ↵drath
for noticing this bug and providing a fix) git-svn-id: svn://svn.berlios.de/openocd/trunk@130 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-31- merged several changes from XScaledrath
- complain about identify_chain scan with all bits one (jtag communication problem) - add 0x80000 as a valid size for lpc2000_v2 flash banks (previously only the user accessible 0x7d000 were valid) git-svn-id: svn://svn.berlios.de/openocd/trunk@129 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-22- fix incorrect parsing of whitespace in command.c (thanks to Magnus Lundin)drath
- fix infinite recursion in target_init_handler (thanks to jw and Magnus Lundin) - fix CFI flash handlign with buswidth < 32bit (thanks to Daniele Orio for reporting this) - add support for reading JTAG device id (currently only as debug output on startup) - cleaned up handling of EmbeddedICE registers. Supported functionality and register size now determined by EmbeddedICE version number. - small cleanups/fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@124 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2007-01-09- disabled FT2232 debug output (that code should be fairly stable)drath
- fixed bug in jtag.c where JTAG command type was wrong for PATHMOVE commands - added lattice ISP cable (experimental) - properly initialize parallel port (clear tristate bit) - fixed jtag/Makefile.am that failed with some versions of autotools - print error number if read() in gdbserver.c failed on Windows - fixed handling of opcodes with bits 27-25 b011 (comment was correct, code had a bug) - added support for AT91SAM7SE internal flash git-svn-id: svn://svn.berlios.de/openocd/trunk@122 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-22- added a PLD (programmable logic device) subsystem for FPGA, CPLD etc. ↵drath
configuration - added support for loading .bit files into Xilinx Virtex-II devices - added support for the Gateworks GW16012 JTAG dongle - merged CFI fixes from XScale branch - a few minor fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@116 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-11-05- correctly enter debug state on a "soft_reset_halt" commanddrath
- several small fixes - retry reading from a FT2232 device on incomplete reads git-svn-id: svn://svn.berlios.de/openocd/trunk@110 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-10-23- several small fixes (thanks to Magnus Lundin and Spencer Oliver)drath
- added support for using Luminary Micro development board 'evb_lm3s811' as a JTAG interface (thanks to Magnus Lundin) git-svn-id: svn://svn.berlios.de/openocd/trunk@106 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-10-06- added support for American Microsystem's M5960 (FT2232 based USB JTAG ↵drath
interface) - added support for AT91SAM7A devices (thanks to Magnus Lundin) - updated README with pointer to Amontec's JTAGkeyTiny git-svn-id: svn://svn.berlios.de/openocd/trunk@102 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-28- str9x flash support (Thanks to Spencer Oliver)drath
- str75x flash support (Thanks to Spencer Oliver) - correct reporting of T-Bit in CPSR (Thanks to John Hartman for reporting this) - core-state (ARM/Thumb) can be switched by modifying CPSR - fixed bug in gdb_server register handling - register values > 32-bit should now be supported - several minor fixes and enhancements git-svn-id: svn://svn.berlios.de/openocd/trunk@100 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-12- allow writes to second flash bank on STR71x devices (cleaned up sector ↵drath
list building) - cleaned up str7x flash erase and protect code (use two accesses to erase sectors in both banks) git-svn-id: svn://svn.berlios.de/openocd/trunk@98 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-07- free working area used to store flash write bufferdrath
git-svn-id: svn://svn.berlios.de/openocd/trunk@96 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-09-07- integrated patch from Magnus Lundin that fixes at91sam7 flash timing bugs ↵drath
and possible endianness problems (big endian hosts) - correctly write trailing bytes on str7x flashes - speed up str7x flash writing by offloading the algorithm to the target git-svn-id: svn://svn.berlios.de/openocd/trunk@95 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31- made lpc2000 code endianness safe (support big-endian hosts, target is ↵drath
always little) git-svn-id: svn://svn.berlios.de/openocd/trunk@92 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-31- endianess fixes everywhere but in the flash code. flashing might still be ↵drath
broken on big-endian targets and/or hosts - added access to ARM920T vector catch register (via generic register mechanism) - don't disable linefills on ARM920T cores - this lead to lockups when accessing lines already contained in cache - read content of ARM920T cache and tlb into file (arm920t read_flash/read_mmu commands) - memory reading improved on ARM7/9, can be further accelerated with new "arm7_9 fast_memory_access enable" command (renamed from fast_writes) - made in_handler independent from in field (makes the handler more flexible) - added timeout to ft2232 when using D2XX library - fixed STR7x protection bit handling on second bank (thanks to Bernard) - added support for using the OpenOCD on AT91RM9200 systems (thanks to Anders Larsen) - fixed AT91SAM7 flash handling when not running from 32kHz clock (thanks to Anders Larsen) git-svn-id: svn://svn.berlios.de/openocd/trunk@90 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-17- renamed jtag_interface_t.support_statemove to ↵drath
jtag_interface_t.support_pathmove (it is used to indicate jtag_add_pathmove support) - fixed small bug in str7x.c that printed an address instead of the target number in an error message - added support for Olimex ARM-USB-OCD. The new ft2232 layout is called "olimex-jtag" git-svn-id: svn://svn.berlios.de/openocd/trunk@87 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-08-06- fixed a minor problem with the GDB server that could drop the first packet ↵drath
(non-fatal) - fixed some small memory leaks (thanks to Spencer Oliver) - verify chip- and buswidth of cfi flash configurations - added support for ARM966E based systems (tested only with ST micro STR9, thanks to Spencer Oliver) git-svn-id: svn://svn.berlios.de/openocd/trunk@81 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-30- added configurable delays after reset lines get deasserted. useful if ↵drath
reset circuitry keeps lines asserted for too long. - additional debug output when opening the parallel port - fixed counting of available arm7/9 watchpoint units - 'flash write' now displays elapsed time git-svn-id: svn://svn.berlios.de/openocd/trunk@79 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-07-17- Added support for native MinGW builds (thanks to Spencer Oliver and ↵drath
Michael Fischer) - you still need to install GiveIO (not part of OpenOCD) - Added state-move support to ftd2xx and bitbang JTAG drivers (required for XScale, possibly useful for other targets, too) - various fixes git-svn-id: svn://svn.berlios.de/openocd/trunk@78 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-23- added support for AT91SAM7A3 flash (patch from andre renaud, thanks)drath
- fix trunk build for mac os x (patch from Lauri Leukkunen, thanks) - added check for host endianness, defines WORDS_BIGENDIAN on a big-endian host (e.g. mac os-x) - fixed bug where endianness of memory accesses could be swapped on BE hosts - added space for zero termination of ftd2xx_layout string (from Magnus Ludin, tahnks) git-svn-id: svn://svn.berlios.de/openocd/trunk@73 b42882b7-edfa-0310-969c-e2dbd0fdcd60
2006-06-02- prepare OpenOCD for branching, created ./trunk/drath
git-svn-id: svn://svn.berlios.de/openocd/trunk@64 b42882b7-edfa-0310-969c-e2dbd0fdcd60
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 10:33:06 +0000