aboutsummaryrefslogtreecommitdiff
path: root/src/flash
AgeCommit message (Collapse)Author
2014-06-22flash: samd: add SAMD10 and SAMD11 part IDsAndrey Yurovsky
Add part IDs for the new SAMD10 and SAMD11 parts within the Atmel SAMD family, they have the same Flash controller as the other samd parts and should be supported by the at91samd driver. Compile-tested only. Change-Id: I493ae96a7d7e8d19e607fd9a4b6544a982be42b3 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/2170 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22flash/nor/tcl.c: fix formatting in "rejected" error messagePaul Fertser
The error message (with the usage field unpopulated) looks like this, obviously missing at least a space before Usage: Error: 'fm3' driver rejected flash bank at 0x00000000Usage (null) Change-Id: I2a625676e784d02942823f972a201f7f4f810c68 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2161 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-22efm32 : Added ZeroGecko family support.Nemui Trinomius
Added Cortex-M0plus "ZeroGecko" Family to flash driver. Tested on EFM32ZG222F32. Change-Id: I1660b34ef6ee04837e97581504fff0faf84d1c6d Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1994 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-19stm32f1x: add STM32F33x support.Nemui Trinomius
Added STM32F33x series to flash driver. Tested on NUCLEO-F334R8 board(STM32F334R8T6). Change-Id: I2fe70d40eb7613a7a3cfa63d25fa83f7bc055fb4 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/2174 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-06-18flash/nor/kinetis: prevent segfaulting with an HLAPaul Fertser
HLAs do not provide direct DAP access, so the best we can do about it is skipping it. Change-Id: I877ef8fd2d86e40e7442a637cdba182cfd60e05a Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2173 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-18flash/nor/at91sam4: add SAM4E16 supportMarco Cruz
Change-Id: I7ab4750073c9d34812b690996eef76fccf70c627 Signed-off-by: Marco Cruz <marco.caratuva@gmail.com> Reviewed-on: http://openocd.zylin.com/2157 Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-06-01Flash/LPC2000: Add support for auto-probing flash sizeCosmin Gorgovan
Adds support for auto-probing on devices which support the IAP Read Part ID command. Includes IDs for all LPC17XX, LPC13XX, LPC11XX and LPC11XXX devices with publicly available user manuals. To use auto-probing, select the 'auto' lpc2000 variant. Change-Id: Ic617c32925c9ebe0e9d9192ed8ddbfa08e9f0aaa Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2075 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01Flash/LPC2000: Add support for LPC11(x)xx, LPC13xxCosmin Gorgovan
LPC11(x)xx and LPC13xx devices are mostly compatible with the lpc1700 variant of the LPC2000 driver, but use a fixed flash sector size of 4KB. Change-Id: I033515f4ff6bc61d3b9babd27096f78c99cea927 Signed-off-by: Cosmin Gorgovan <cosmin@linux-geek.org> Reviewed-on: http://openocd.zylin.com/2071 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-06-01STM32F2x: Don't clear FLASH_OPTCR bits when locking registerElliott Partridge
stm32x_write_options is locking the FLASH_OPTCR register by writing 0x00000001 to it, which clears the other bits. This causes problems with subsequent flash operations; the hardware is probably seeing the write protection bits in the register set to '0' (protect), causing a WRPERR. This patch ORs the value of the register with 0x00000001, so that the only change is the lock bit itself. Change-Id: I0e3ca9aa6563ce1b57a01fc0faf7563b6b85f620 Signed-off-by: Elliott Partridge <elliott.partridge@gmail.com> Reviewed-on: http://openocd.zylin.com/2155 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-31flash/nor/stm32f1x: add support for F04x partsPaul Fertser
Ref. RM0091 Rev.6. Change-Id: I13bcdb1741edc59712e4fa1849fff38d17709fa7 Reported-by: efuentes@irc.freenode.net Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2150 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-05-16lpcspifi: setup a valid stack pointer before calling ROM code using stackAurelien Jacobs
The spifi_init_code blob is calling the spifi_init() function from the ROM. This ROM function is making use of the stack. So if the stack pointer is invalid, trying to execute this code leads to a double fault and the target_run_algorithm() call return with an error. This patch simply ensure that the stack pointer is properly setup before calling the spifi_init() ROM function. Change-Id: I42a2163cfc2c6dfe5ada97ae8eb2bb6d2e283ff7 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/1836 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-10kinetis: Revise CPU un-securing codeAndrey Smirnov
Old version of the code had several problems, among them are: * Located in a generic ADI source file instead of some Kinetis specific location * Incorrect MCU detection code that would read generic ARM ID registers * Presence of SRST line was mandatory * There didn't seem to be any place where after SRST line assertion it would be de-asserted. * Reset was asserted after waiting for "Flash Controller Ready" bit to be set, which contradicts official programming guide AN4835 * Mass erase algorithm implemented by that code was very strange: ** After mass erase was initiated instead of just polling for the state of "Mass Erase Acknowledged" bit the code would repeatedly initiate mass erase AND poll the state of the "Mass Erase Acknowledged" ** Instead of just polling for the state of "Flash Mass Erase in Progress"(bit 0 in Control register) to wait for the end of the mass erase operation the code would: write 0 to Control register, read out Status register ignoring the result and then read Control register again and see if it is zero. * dap_syssec_kinetis_mdmap assumed that previously selected(before it was called) AP was 0. This commit moves all of the code to kinetis flash driver and introduces three new commands: o "kinetis mdm check_security" -- the intent of that function is to be used as 'examine-end' hook for any Kinetis target that has that kind of JTAG/SWD security mechanism. o "kinetis mdm mass_erase"" -- This function removes secure status from MCU be performing special version of flash mass erase. o "kinetis mdm test_securing" -- Function that allows to test securing fucntionality. All it does is erase the page with flash security settings thus making MCU 'secured'. New version of the code implements the algorithms specified in AN4835 "Production Flash Programming Best Practices for Kinetis K- and L-series MCUs", specifically sections 4.1.1 and 4.2.1. It also adds KL26 MCU to the list of devices for which this security check is performed. Implementing that algorithm also allowed to simplify mass command in kinetis driver, since we no longer need to write security bytes. The result that the old version of mass erase code can now be acheived using 'kinetis mdm mass_erase' Tested on accidentally locked FRDM-KL26Z with KL26 Kinetis MCU. Change-Id: Ic085195edfd963dda9d3d4d8acd1e40cc366b16b Signed-off-by: Andrey Smrinov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2034 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-05-05Fix some C99 format specifiersPaul Fertser
As exposed by arm-none-eabi build, fix the wrong modifiers. Change-Id: Ia6ce7c5c1d40e95059525c3e5d81b752df2fea7c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2122 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-04-27nrf51: remove dereference of null pointerSpencer Oliver
found by clang 3.4. Change-Id: Id499b546f65acd7a719498bc97e33b21d1ba565a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/2119 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
2014-04-08flash/nor/at91sam3: remove sam3_page_write_opcodesPaul Fertser
Apparently this helper was never actually used, and current clang produces an unused const variable warning, so it's breaking the build. Change-Id: Ib088bef5e9c0a48942c1d417d46f738469ee7e28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2076 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-03-29at91smad: Fixes to 'samd_protect'Andrey Smirnov
Some fixes to 'samd_protect' including: - Fix a bug in which the value of 'set' parameter passed into the function was ignored so it was impossible to remove flash protection once it was set. - Check the protection status of the sector via 'is_protected' field of the corresponding 'flash_sector' structure to see if any actual HW manipulations needs to be done. - Change the way the errors during protection activation are handled. Now even in the case of error in the middle of protecting a number of sectors the subroutine would still update the state of the sector protection in sectors array so as to avoid cases where openocd thinks that the sector is not protected while it actually is. Change-Id: I4cc6445a98ec13bdd94c89f0711c17840738a215 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2027 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Bail early if trying to erase protected sectorAndrey Smirnov
Bail early if trying to erase protected sector and also do not double-erase already erased sectors. Change-Id: Ic2d39af48c3b8e10e78d52dd978b9bc01f671c6a Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2026 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Bail early if trying to write to protected sectorAndrey Smirnov
Bail early if trying to write to protected sector also mark the sector we are writing to as dirty. Change-Id: I892f83461792e1cc2dcccade7aa65717831a6805 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2025 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29at91samd: Remove 'first' and 'last' checks in 'samd_erase'Andrey Smirnov
Remove 'first' and 'last' checks in 'samd_protect' since those parameters are checked in 'handle_flash_erase_command'. Change-Id: I30e5598a9ab656d81055f26cc63e291377605300 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2024 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29Move ocl (at91sam7x flash loader) sources to contribPaul Fertser
Change-Id: Ib5c3c505a067d0e285a7b074cb6fddebfa6dda1e Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1904 Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Tested-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-29nrf51: Fix incorrect flash writing sequenceAndrey Smirnov
nRF51 doesn't have any sort of flash page cache so we need to write all of the data on the word-by-word basis and poll for "Flash Ready" bit each time. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: I8caffbf69ebf9a69915724704ddbe270d1bb8d92 Reviewed-on: http://openocd.zylin.com/2050 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Remove unnecessary explicit type castingAndrey Smirnov
Change-Id: I523e81645434760649ea2c00e6f80c2b08d08d94 Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/2055 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Add UICR writing supportAndrey Smirnov
SoftDevice stack ihex binary, provided by Nordic expects being able to write data necessary for its correct operation at the adresses inside UICR. This patch exposes UICR region of flash as a second bank on the MCU to facilitate that. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Idbc140b8de027f60655f78043877b7c054eb06f9 Reviewed-on: http://openocd.zylin.com/2013 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29nrf51: Add a known devices table and simple chip type detection codeAndrey Smirnov
Unfortunately due to my oversight, the original version of the nrf51_probe function contained useless code that read the contents of DEVICEID[0] an DEVICEID[1] registers and did nothing about it(those registers had nothing to do with the device type information anyway). This commit fixes that code by changing its behavior to read the HWID field of CONFIGID register and looking up the corresponding device information in the know devices table. This information is useful when choosing the versions of SDK and SoftDevice for the chip using "nRF51822 compatibility matrix". Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: Ibd80b35460df4278e86e0c2500b7dcc876eec10c Reviewed-on: http://openocd.zylin.com/2012 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-29AT91SAM4L: Fix bug when writing to flash at a non-zero offset, add debugAngus Gratton
output for flash page writes The offset wasn't being considered in the "full page" write codepath, so any writes at an offset were actually written out starting from page 0. Change-Id: I5e70a1f35f144b3edd1ce6d9df9af9b5da6cf194 Signed-off-by: Angus Gratton <gus@projectgus.com> Reviewed-on: http://openocd.zylin.com/1965 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29Support for sam3n0a sam3n0b sam3n00a sam3n00bAndreas Fritiofson
Change-Id: I70a04f5f9b0b20d42a677ea8781130e44be758d3 Signed-off-by: Stefan Arnold <sarnold@sh-sw.de> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2042 Tested-by: jenkins Reviewed-by: Stian Skjelstad <stian@nixia.no> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-29flash/nor/tcl: fix segfault on write_image misusePaul Fertser
"flash write_image (unlock|erase)" (without filename) was causing segmentation fault in strcmp(). This patch fixes it. Change-Id: Ia3b8c796f4107621d78605c02d2b8e123b1b207b Reported-by: ajkroll][ <ajkroll][@irc.freenode.net> Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1970 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17stm32f2x.c: Add STM32F401xE device id.Jens Hoffmann
Nucleo F401 board uses STM32F401RE chip with new device id and got more flash than existing devices (512K). This patch adds new the identifier to probe functions so flashing will now work. Change-Id: Ibe9c047c79244db0cfbb06610da9d84987b9f85a Signed-off-by: Jens Hoffmann <jehoffma@gmail.com> Reviewed-on: http://openocd.zylin.com/2037 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17flash: Constify write bufferAndreas Fritiofson
Change-Id: Ic812098d3ed5a2992c26bb57d08ae350e2c5d5d8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2040 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17flash/kinetis: Fix bug in odd byte count paddingAndreas Fritiofson
Change-Id: Ic5cfd880f2b49e3a96c408cf868db622bfe698a1 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2039 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-17flash/efm32: Fix bug in odd byte count paddingAndreas Fritiofson
Change-Id: I7fcd152a8501f399c6ac5a85fd62a84c82b030a0 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2038 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-07nrf51: Fix format string bugs in nrf51_infoAndrey Smirnov
Additional information string appended to the 'flash info' output used incorrect offsets and was missing a couple of fields. Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Change-Id: If131be021295cab6adfca7da03c2f0fb8dca7d42 Reviewed-on: http://openocd.zylin.com/2011 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-03-04Add support for the Atmel SAMG53Andrey Yurovsky
flash: at91sam4: add support for the SAMG53 family (this also covers the SAMG51). The SAMG5x parts have an EEFC (enhanced embedded flash controller) which seems to be identical to the EFC that the sam4 driver supports. Add a script for the Xplained Pro G53 board, this has the onboard CMSIS-DAP debugger and a SAMG53N19. Tested on this board and chip combination. Change-Id: I12af50402cd2069b3c7380d92e6fe54816d6c045 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1974 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24fm3: fix erase flash fail on using High Level Adapters.Nemui Trinomius
This fix can "erase flash" on using High Level Adapters by running algorithm. Because fm3 flash commands must need true 16-bit memory access, but High Level Adapters(ST-Link/TI-ICDI) can 8/32bit access only. Tested on MB9BF618T and MB9AF112K with STLink/V2. Change-Id: I849a8a8e8ae2b3e77717de04f7522cf718c915d7 Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1944 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24nrf51: Implement the support for Nordic's nRF51 devicesAndrey Smirnov
Add support for Nordic's nRF51 chip series. Tested with nRF51822. Change-Id: Id70f6fd76888cc595a353aefb84d25c4cd325d7d Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reviewed-on: http://openocd.zylin.com/1945 Tested-by: jenkins Reviewed-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24EFM32 Wonder Gecko Family supportJoerg Fischer
Add support for EFM32 Wonder Gecko family to flash driver. This family has Cortex M4F core. Change-Id: If71511015403069e3e30cb9f19df12cd97ac49e8 Signed-off-by: Joerg Fischer <turboj@gmx.de> Reviewed-on: http://openocd.zylin.com/1968 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-24stm32f1x: Fix option byte flag parsingAndreas Fritiofson
Change-Id: Ifa04e1f215ac5790db3d432cc0d7d532660459f2 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1963 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-11nor/flash/stm32f1x: add stm32f07x supportKuldeep Singh Dhaka
Added configuration to work with stm32f07x. Tested on stm32f072discovery with libopencm3 stm32f0 blink example. Change-Id: I63cdc9bf1f28f5951d6b4faac871cfde331c9c78 Signed-off-by: Kuldeep Singh Dhaka <kuldeepdhaka9@gmail.com> Reviewed-on: http://openocd.zylin.com/1921 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-02-06flash: declare fixed arrays constSpencer Oliver
Change-Id: Id06b8b53ec59a7b3182f60f51dde5b16563aaeef Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1887 Tested-by: jenkins
2014-02-04flash/nor/mdr.c: fix uninitialised variable warningPaul Fertser
Caught (actually, it's breaking the build) by clang 3.3. Change-Id: Ife6fabf8a57e6c90ab45aaaf75557c984ac6772c Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1875 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-04flash/nor/stm32f1x: fix format specifiers warningPaul Fertser
Caught by clang on OS X. Reported by Steffanx on IRC. Change-Id: Id77c7297c58e58c4e2aa8e5dafcb3a29a1f33f3d Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1879 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-02-04kinetis : improve kinetis flash driver.Nemui Trinomius
Kinetis K-series have different guranuarity for each frequency model. This patch adding more minute guranuarity detection. And adopted mass erase command not only L-series but also K-series. Tested on MK20DX32VLF5,MK10DX32VLF5,and MKL25Z128VLK4. Change-Id: Iffef850d4b388463756a13faf02c3890bfc19acf Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1894 Tested-by: jenkins Reviewed-by: Per Ekman <pekenator@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
2014-01-20flash: samd: declare const dataAndrey Yurovsky
Make the chip information lookup tables const (thanks to Spencer Oliver for pointing this out). Also fix spacing on one macro. No functional changes. Change-Id: I053c4951c2626b8aa4541a79673b500394ef08e8 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1874 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-15Atmel samd: add support for SAMD21Andrey Yurovsky
Tested with SAMD21J18A on the SAMD21 Xplained Pro board. Change-Id: Ice9ebcd229ed038b3193baf92d910f9256d7ce91 Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1873 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-11lpc2000: fix LPC810 programming supportNemui Trinomius
IAP commands fail on programming LPC810 because it has only 1kByte of SRAM. This patch is fixing cmd51_max_buffer suitable size for LPC810,LPC811 and other LPC1000 series. Tested on a LPC810,LPC812,LPC11u14,and LPC1114(DIP28). Change-Id: Iecec9fd963cb63bdff4a7bd3bbf4f8b1a7c60fbd Signed-off-by: Nemui Trinomius <nemuisan_kawausogasuki@live.jp> Reviewed-on: http://openocd.zylin.com/1843 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAMD NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91samd", which supports the built-in Flash on Atmel's D-series Cortex M MCUs, starting with the D20. Parts and their geometry are detected automatically using the DSU and lookup schemes described in the D20 document, 42129F–SAM–10/2013. Future D-series variants and families should presumably use this controller as well (possibly with minor changes and improvements). Tested on the SAMD20 Xplained Pro board, for which we also add the corresponding Flash configuration. Change-Id: Id8d3dd601e9f53121682d1a1190d0be4ea3b83eb Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2014-01-09add support for Atmel SAM4L NOR FlashAndrey Yurovsky
This adds a new NOR Flash driver, "at91sam4l", which supports the built-in Flash on Atmel's low-power SAM4L family of Cortex M4 MCUs. Parts and their geometry are detected automatically using the Chip ID and lookup schemes described in document 42023E–SAM–07/2013. Tested on AT91SAM4LC4CA via the SAM4L XPlained Pro development kit. Change-Id: If73499dee92cc8ce231845244ea25c6984f6cecd Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com> Reviewed-on: http://openocd.zylin.com/1639 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-30topic: Added Spansion S25FL128S and S25FL256S spifi devices.Steve Moorby
S25FL256S device tested on mbest LPC4357 EVM, S25S128S untested but from the same data sheet. Change-Id: Idf58416aab08671fe29d22c3c34c2118b25a9d45 Signed-off-by: Steve Moorby <steve.moorby60@gmail.com> Reviewed-on: http://openocd.zylin.com/1844 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-12-22kinetis : Detect MCU flash parameters based on the SDID register.Per Ekman
Try to detect the flash parameters based on the MCU SDID register. The hope is that this works for K and KL series MCUs but it has only been tested on a K21. YMMV. Change-Id: Idfe71383a449065267f393b09ee3c3b24ac6a803 Signed-off-by: Per Ekman <pekenator@gmail.com> Reviewed-on: http://openocd.zylin.com/1823 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-12-22Avoid 'may be used uninitialized' warning from FreeBSD base GCCEd Maste
Change-Id: Ice2472bf7a467652485a5a8c36880c6a47d64c6c Signed-off-by: Ed Maste <emaste@freebsd.org> Reviewed-on: http://openocd.zylin.com/1835 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-21 15:12:07 +0000