aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor
AgeCommit message (Collapse)Author
2012-05-21flash/nor/driver.h: typo fixChristopher Kilgour
Change-Id: Ie260f3c38b648e66958c014658bb6860171a7cc9 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://openocd.zylin.com/653 Tested-by: jenkins Reviewed-by: Bill Traynor <wmat@alphatroop.com> Reviewed-by: Xiaofan <xiaofanc@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14flash: blank check use default_flash_blank_checkSpencer Oliver
Use default_flash_blank_check, this will use the much faster blank_check_memory handler if supported - 15x quicker on stm32f4. Otherwise it will fall back to using the slower default_flash_mem_blank_check. Change-Id: Ia231b3e95468c9e92594dbdbe1fa2d69e1506fc3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/632 Tested-by: jenkins
2012-05-14flash: fix protect check for pic32mx1x/2x familySpencer Oliver
Change-Id: Ib2692d8b79e52cd40f429008047494aa7f552984 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/612 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2012-05-14cfi: fix write_bank segfault with spansion flash on armv7mAurelien Jacobs
cfi_spansion_write_block() passes an arm_algorithm struct to target_run_algorithm() which in turn calls armv7m_start_algorithm() which expect an armv7m_algorithm struct. As armv7m_algorithm is bigger than arm_algorithm, when armv7m_start_algorithm() writes in the struct, it overrun the buffer, writting junk on the stack, which latter on generates a segfault. This patch ensure we use a properly sized armv7m_algorithm struct when the target is an armv7m. Change-Id: I4ab67c15ae4bb72454414a81b92a4231dcdb2239 Signed-off-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-on: http://openocd.zylin.com/623 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14cfi: fix cfi arch check regressionSpencer Oliver
seems 9933fa334de551096674d4044ed7ac2152213e8b introduce a regression if the target was anything other than armv4_5 or armv7m. Just check that we have an arm target. Change-Id: I67c05138e5be2952ee92e9bfa15e1d050844462a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/615 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14cfi: check supported archSpencer Oliver
check that the cfi driver supports the current target arch. Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/614 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14build: use generic name for arm_algorithm varsSpencer Oliver
This makes the code a bit easier to read as arm_algorithm can refer to other arch's, not just armv4_5. Change-Id: I78c99d40f34cda04e06f2daee75b48ff40a1d23d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/613 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-08flash: use correct stm32f0 flash size registerSpencer Oliver
The stm32f0 parts use a different address then the rest of the family. Add a function that returns the correct FLASH_SIZE reg depending on variant. Change-Id: Idb41580f7162f395b347cec034d6b745847326b7 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/601 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-04build: remove clang unused variable assignment warningsSpencer Oliver
Change-Id: Ibe5254704d6cd879a318a82c4f50d9da3c14276c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/600 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-05-04build: remove clang unused variable increments warningsSpencer Oliver
Change-Id: Ib755474aa46f7233495fae1947bc27cd0b2d6b4f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/599 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-30flash: update stm32f0x version infoSpencer Oliver
Change-Id: Iab0962021e6243d1df3e7c647654a51b4bf50d72 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/578 Tested-by: jenkins Reviewed-by: Mathias Küster <kesmtp@freenet.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-26SAM3X - Added support for at91sam3x8h-ES, fixed CIDR for ES2 and productionOlivier Schonken
The first available devkits for the at91sam3x8h had the ES device populated. The ES device had an error in the CIDR, specifically in the last byte of which the upper 3 bits identifies the chip family - cortex-m3, arm7tdmi etc. The problem was fixed on the ES2 devices - Thanks to Pat Hickey for giving me the heads-up. Change-Id: I13dd7fbe0cffaf76f948188c9459dc3cf4435570 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/575 Tested-by: jenkins Reviewed-by: Jim Norris <u17263@att.net> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-26topic: Added support for the SAM4S variantsOlivier Schonken
Atmel introduced 6 new Cortex-M4 processors on 2011-10-26 SAM4S16C - 1024KB flash LQFP100/BGA100 SAM4S16B - 1024KB flash LQFP64/QFN64 SAM4S16A - 1024KB flash LQFP48/QFN48 SAM4S8C - 512KB flash LQFP100/BGA100 SAM4S8B - 512KB flash LQFP64/QFN64 SAM4S8A - 512KB flash LQFP48/QFN48 The SAM4S processors still suffer from the "6 waitstates needed to program device" errata. Other relevant changes are: 1. Address of flash memory starts at 0x400000. 2. EWP (Erase page and write page) only works for the first two 8KB "sectors" 3. Because of the EWP not working for all the sectors, normal page writes have to be used. The default_flash_blank_check is used to check if lockregions should be erased. 4. The EA (Erase All) command takes 7.3s to complete. (Previous timeout was 500 ms) 5. There are 128 lockable regions of 8KB each. Implemented default blank checking, and page erase for load_image scenarios. This is to compensate for the EWP flash commands only working on the first 2 8KB sectors. Change-Id: I7c5a52b177f7849a107611fd0f635fc416cfb724 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/528 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-04-24topic: Fixed a clang Dead assignment warning.Linus Tolke
The value returned from target_write_buffer is still ignored. Change-Id: Icb49d4d1313a5e4f7df68d3f122a5f81cfa0604a Signed-off-by: Linus Tolke <linus@tigris.org> Reviewed-on: http://openocd.zylin.com/596 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-13STM32L: Write partial-page flash data after full-page dataMathias K
The target address for the partial data needs to be bumped past the full page data. Otherwise, the partial data overwrites the start of the flash block. Change-Id: I1246b2fa8acbdb8193edcf7029309f11d1c6069c Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/555 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-04-10topic: add reset functions for SWDSimon Qian
Add swd_init_reset and swd_add_reset. Add adapter_assert_reset and adapter_deassert_reset, and call them instead of JTAG reset functions. Change-Id: Ib2551c6fbb45513e0ae0dc331cfe3ee3f922298a Signed-off-by: Simon Qian <simonqian.openocd@gmail.com> Reviewed-on: http://openocd.zylin.com/526 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-30topic: Flash support for Pic32mx1xx/2xxSalvador Arroyo
Change-Id: I496cb745fb1eb5c9159471838013b8d19418f5c0 Signed-off-by: Salvador Arroyo <sarroyofdez@yahoo.es> Reviewed-on: http://openocd.zylin.com/500 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-19Add warn message if no flash bank found for the current image address.Mathias K
Add a warn message to inform the user that something is wrong with the flash settings or command parameters. Change-Id: Ia55868b2abf2a17845e51620b0f29b2809d841c2 Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/280 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-14flash: Fix flash write algorithm on pflash only devices.Mathias K
This patch fix the slow flash write issue on pflash only devices. The Family Reference Manual says: For devices with FlexNVM: FlexRAM For devices with program flash only: Programming acceleration RAM So the acceleration RAM is available for the flash section command on this device. Change-Id: If6541a23a4457c5ed8858848a145f35cac63138b Signed-off-by: Mathias K <kesmtp@freenet.de> Reviewed-on: http://openocd.zylin.com/509 Tested-by: jenkins Reviewed-by: Tomas Frydrych <tf+openocd@r-finger.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13topic: Added support for the SAM3X/A variantsOlivier Schonken
Atmel introduced 7 new Cortex-M3 processors on 2012-02-28 SAM3X4C - 256KB flash SAM3X4E - 256KB flash SAM3X8C - 512KB flash SAM3X8E - 512KB flash SAM3X8H (Only on dev-kit - not in production...) - 512KB flash SAM3A4C - 256KB flash SAM3A8C - 256KB flash The SAM3X/A processors still suffer from the "6 waitstates needed to program device" errata. The CIDR address for the SAM3X/A processors are different from the other SAM3 processors. Unfortunately, the chip identification register is not at a constant address across all of the SAM3 series'. As a consequence, a simple heuristic is used to find where it's at... If the contents at the first address is zero, then we know that the second address is where the chip id register is. We can deduce this because for those SAM's that have the chip id @ 0x400e0940, the first address, 0x400e0740, is located in the memory map of the Power Management Controller (PMC). Furthermore, the address is not used by the PMC. So when read, the memory controller returns zero. Another interesting change is the flash bank address for flash bank 1. It is not fixed at 0x00100000 like the Sam3U. Bank 1 of the at91sam3a/x series starts at 0x00080000 + half the total flash size. Thus for the 256KB devices Bank 1 is located at 0x000A0000, and for the 512KB devices Bank 1 is located at 0x000C0000. The configuration files for the SAM3X/A processors will follow Change-Id: I6c3a707c00e05d993a2ad1d5a423f23b37ffd553 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/505 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-11flash: retire unused eCos flash driverØyvind Harboe
even the AT91EB40a's flash is covered by CFI and nobody ever submitted any other drivers based on eCos code. It's just possible that this idea was missing documentation and "marketing", but it's in git if somebody wants to resurrect it. Change-Id: I66449aa6e0997301f9d67f28098789bfc891d6e9 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/502 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06flash: stm32f1x: add a couple missing stm32x_get_flash_regSzymon Modzelewski
Change-Id: I163de2c1bd962e7ea9ca6c741c1c62224c210677 Signed-off-by: Szymon Modzelewski <szmodzelewski@gmail.com> Reviewed-on: http://openocd.zylin.com/486 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06flash: Additional check for NULL in str9xpec enable_turboFredrik Hederstierna
Change-Id: Ifde8783b27c64e4a4bbea180cfa2c86f6a9fe49a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/496 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-03-06SAM3: Remove unused reference to SUPC registersAttila Kinali
The SUPC (Supply Controller) registers are on different base addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N: 0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const, but would need to be changed at runtime to account for this variability. As this register is not used anywhere, it's simplest to just remove it. Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Add missing architecture names for SAM3S and SAM3NAttila Kinali
Change-Id: Ie2177487d4315219eb364db360cb7f88d2720783 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3S: correct flash sector sizes.Attila Kinali
Lock region count and sector sizes did not match datasheet. (see 6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Fix assert to check flash programming offsetAttila Kinali
The assert introduced in 00c864835149a96b431fc8f31dd89542d88fd383 checks whether the programming offset equals to page_size of the flash, while it wants to check whether the offset is a multiple of the page_size. Change-Id: I794d021951a28c1cc520b5eea5d500f097721b06 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/482 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-02-29flash: add stm32lx High Density DevicesSpencer Oliver
Change-Id: Ieed9de4b078e1ebf659054a758b4f69acdf5b83e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/466 Tested-by: jenkins
2012-02-29flash: change stm32lx driver probe behaviourSpencer Oliver
Currently stm32lx flash driver will remove the readout protection if set during a probe. This may not be what the user wants, so let them decide. Change-Id: I8575e3b339b10a4f7bac57cca9586dcab513d347 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/465 Tested-by: jenkins
2012-02-27flash: add new devices to pic32mx flash driverSpencer Oliver
update as per DS61145 rev J Change-Id: I2b5da84248ff2f44c7ca9d2ed1c52db453714c05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/461 Tested-by: jenkins
2012-02-26flash: add stm32f2x async flash loaderSpencer Oliver
This enable the stm32f2x flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 1048576 bytes from file stm32f4x.bin in 30.453804s (33.625 KiB/s) after - wrote 1048576 bytes from file stm32f4x.bin in 23.679497s (43.244 KiB/s) This also fixes a bug that was in the old flash loader. The old loader waited while bit16 of the status reg was 0, the new loader waits until this bit is 0 as stated in the flash spec. Bizarrely this bug did not effect programming on any tested parts. Change-Id: I3efc94d42cbe81283673a8f4203700638080af6e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/460 Tested-by: jenkins
2012-02-26flash: add stellaris async flash loaderSpencer Oliver
This enable the Stellaris flash driver to use the asynchronous algorithm support. Speed increase is as follows: before - wrote 65536 bytes from file test.bin in 5.486040s (11.666 KiB/s) after - wrote 65536 bytes from file test.bin in 2.274001s (28.144 KiB/s) Change-Id: I9004c9aadffa1ae3b0cbf908e6549b5b1f794508 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/403 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-26target: add target async algorithm supportSpencer Oliver
Currently the stm32f1x flash driver uses an asynchronous algorithm as part of the block flash programming. This greatly speeds up flash programming as the target is always running. Moving the async code to the target enable other targets to use this added functionality. Change-Id: I8e53f094c2ef7848a7f86ddb9a35b6edbfc8454a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/402 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-02-16Add stm32f0x probe and info workingJonathan Dumaresq
I used the CPUID instead of adding a new argument to the flash bank command Fixed Type in comments Add the failsafe return value in device_id Change-Id: Ieb5a46fc002b5390a0c81bc8b49f6c687036ae1d Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-on: http://openocd.zylin.com/438 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-13flash: fix incorrect stm32f2x/stm32f4x flash size registerSpencer Oliver
The ref manuals for the stm32f2x (RM0033 Rev4) and stm32f4x (RM0090 rev1) are unclear to the address of the flash size register (F_ID). According to contacts @ ST this is the correct address, the manuals will be updated in due coarse. Change-Id: If9fb83b3100458d17038cf27c2b23355e1dc5a9e Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/448 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: jenkins
2012-02-06doxygen: use correct comment syntaxSpencer Oliver
This issue was caused by uncrustify not correctly converting the doxygen comments. Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Change-Id: Ie6dc3b057a08603b670cb27312e5f0d989426e6c Reviewed-on: http://openocd.zylin.com/431 Tested-by: jenkins
2012-02-06build: cleanup src/flash/nor directorySpencer Oliver
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins
2012-01-30stm32f1x: fix bug in flash loader and restrict instruction set to armv6-mAndreas Fritiofson
Correct the offset to the read pointer when clearing it on error. Also restrict the instruction set to armv6-m so the flash driver can be used on Cortex-M0 parts with the same flash controller. Change-Id: I380f9dabcc41fb6e4d43a7e02f355e2381913f39 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/399 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-27flash: fix stellaris class regressionSpencer Oliver
for some reason the following commit was incorrect 769064de4bd8fc59804c37a418b83fcdba6fd36f Only the Sandstorm and Fury class should write this register. Change-Id: Ie18f1da6e9b59fb99cca47aa93c7f2fee447ccea Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/400 Tested-by: jenkins
2012-01-23flash: cleanup/reformat fm3 flash driverFujitsu FM3 Application Team
Signed-off-by: Fujitsu FM3 Application Team <openocd.fseu@de.fujitsu.com> Change-Id: Iaf0bacfa5438a0213a65a3d60e7d461965a5a1ac Reviewed-on: http://openocd.zylin.com/249 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-01-23flash: update stellaris_set_flash_timing for target classSpencer Oliver
stellaris_set_flash_timing should only be used for Sandstorm and Fury device classes. Change-Id: Ib5eff9d954c039f2c5726a8ecc3ee45d1694cfd3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/389 Tested-by: jenkins
2012-01-23flash: cleanup stellaris device class detectionSpencer Oliver
read the target class during probe and save for later use. Change-Id: Ib3ad20edc7d206b7f434bdcc6b947e6a5f06dd1f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/388 Tested-by: jenkins
2012-01-23cleanup: rename armv4_5 to arm for readabilitySpencer Oliver
Nothing more than a name change, just to make reading the code a bit simpler. Change-Id: I73a16b7302b48ce07d9688162955aae71d11eb45 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/390 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-23flash: print bank usage on failureSpencer Oliver
This makes use of the newly introduced usage field in the flash bank structure. Also remove the assertion if usage field is null and lets print a DEBUG_LOG message instead. Change-Id: I384bf0e2c444fcc99deef73aec9ef01149a91c76 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/391 Tested-by: jenkins
2012-01-18flash: add missing stellaris device classesSpencer Oliver
This adds missing classes to the stellaris flash driver. Change-Id: I90f2218479e5eb60950046fef04429b9529f7ddf Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/382 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2012-01-12build: fix broken commitSpencer Oliver
fixes commit 04fe2ca5547f76686c7dc555f90510eed6fcc551 Change-Id: Id7fcb82fa1a445f1df21b8d98e945f7c0e08ec93 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/375 Tested-by: jenkins
2012-01-12flash: stm32f2x incorrectly using 512 as max family sizeSpencer Oliver
Change-Id: I2bac348c6d0baabd3d88335c5aa0a318ef66653a Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/353 Tested-by: jenkins
2012-01-12flash: detect stm32f4x device id errataSpencer Oliver
This allows us to detect a device arrata where the device id returned is incorrect. This issue only effects stm32f4x Rev A silicon. Change-Id: Ic9f4985f9abf562f97322dcf484199f0a4eb01bb Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/354 Tested-by: jenkins
2012-01-12cmd: add missing usage varSpencer Oliver
Change-Id: I0f05d643b0801b19cc3beb88f0d12d7e4c83ef9c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/356 Tested-by: jenkins
2012-01-12flash: use correct device_id maskSpencer Oliver
The stm32 drivers have been using 0x7ff as the DEV_ID mask, this should have been 0xfff. Change-Id: I232469620969d6dd1b9a2a2aa15ec18b947dbb05 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/352 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 10:22:17 +0000