aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor
AgeCommit message (Collapse)Author
2016-06-23cfi: Add support for strangely endianness broken SoC implementationsEsben Haabendal
This adds the 'data_swap' parameter to the CFI driver, which enables swapping of data bytes when writing/programming words to the flash. Note, that this specifically means that bytes are not swapped when writing command words to the flash chip. Unless you are using the SAP in an LS102x chip to program an attached 16-bit NOR flash, you hopefully do not need this! Change-Id: I1e6f7169da36f373c880d1756d9c21c9957acc50 Signed-off-by: Esben Haabendal <esben@haabendal.dk> Reviewed-on: http://openocd.zylin.com/3109 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-05-24Make #include guard naming consistentMarc Schink
Change-Id: Ie13e8af0bb74ed290f811dcad64ad06c9d8cb4fa Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/2956 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-24Remove FSF address from GPL noticesMarc Schink
Also make GPL notices consistent according to: https://www.gnu.org/licenses/gpl-howto.html Change-Id: I84c9df40a774958a7ed91460c5d931cfab9f45ba Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3488 Tested-by: jenkins Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-20lpcspifi: Fix SWD support for LPC43xxAndreas Färber
When using SWD rather than JTAG transport, the lpcspifi driver complains: Error: Device ID 0x0 is not known as SPIFI capable Error: auto_probe failed This is because target's JTAG tap->idcode is zero for SWD. Drop this check completely and hardcode the addresses for now. Neither the JTAG TAPID nor the SWD IDCODE are unique enough to detect the exact chip model and thereby its memory map. Change-Id: Ic230e3e989a3e1f1a5b3bae68bdb34e5ef55d392 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3089 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-20Fix spelling of ARM CortexAndreas Färber
It's Cortex-Xn, not Cortex Xn or cortex xn or cortex-xn or CORTEX-Xn or CortexXn. Further it's Cortex-M0+, not M0plus. Cf. http://www.arm.com/products/processors/index.php Consistently write it the official way, so that it stops propagating. Originally spotted in the documentation, it mainly affects code comments but also Atmel SAM3/SAM4/SAMV, NiietCM4 and SiM3x flash driver output. Found via: git grep -i "Cortex " git grep -i "Cortex-" | grep -v "Cortex-" | grep -v ".cpu" git grep -i "CortexM" Change-Id: Ic7b6ca85253e027f6f0f751c628d1a2a391fe914 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3483 Tested-by: jenkins Reviewed-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-20stm32l1/Cat.3: Devices have only one bank.Uwe Bonnes
Change-Id: I02ce243c228ea20be6d5f01fee705a671747ebad Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3490 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-17kinetis: Fix typo in variable namesAndreas Färber
It's security, not securtiy. Change-Id: Idb10d7e0a1ca47d2d93b496d12cd4ec7ad116f22 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3487 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-14flash/nor: Add Ambiq Micro Apollo flash driver.Rick Foos
Initial release of Ambiq Micro Apollo flash driver supporting our sub-threshold (low power) Cortex M4F part, and Evaluation Kit. We have been shipping openocd to our customers for about one year. The EVK boards are SWD only using ftdi. We also use two of the other COM instances to display debug information. It takes about 15 seconds to flash 512K, and mass erase is about 5 seconds. Tested by internal verification group, FAE's, and customer sites. Merged commit 'refs/changes/17/3417/1' as suggested. Makefile.am and drivers.c follow the new format to avoid conflicts. Removed unused fault_capture command. Added documentation for flash driver. Change-Id: Iae92d869369c6827244f0071f9cb522d8d91fed8 Signed-off-by: Rick Foos <rfoos@solengtech.com> Reviewed-on: http://openocd.zylin.com/3230 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-14xmc4xxx: Improve xmc4xxx_blank_check_memory() error handlingAndreas Färber
Clean up working area in case writing fails. Probably inherited from armv7m_blank_check_memory(). Fix adapted from armv7m_checksum_memory(). Change-Id: I784bef481d1eba833ab6a9c34249fe9d43a16081 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3470 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-08flash/nor/spi: use only lower case hex numbersRobert Jordens
Change-Id: I21ad0d3a73a60d22cb98a0350098baf8af96bebf Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3350 Reviewed-by: Andreas Färber <afaerber@suse.de> Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-08flash/nor/spi: fix macronix 25l1005 chip eraseRobert Jordens
Change-Id: Ibc445bbe9360d0f1f41e71af8b990b96e0ae5d1f Signed-off-by: Robert Jordens <jordens@gmail.com> Reviewed-on: http://openocd.zylin.com/3349 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05Support for debug interface lock of EFM32 controllersLieven Hollevoet
The capability to lock the debug interface on EFM32 controllers was lacking in OpenOCD. After receiving some pointers by zapb_ and PaulFertser on IRC (thanks guys!) I have added this capability. This works by writing the required bits in the debug lock word to '0'. Note: there is currently no way to re-enable the debug interface from OpenOCD as doing this requires specific pin wiggling that is currently not implemented yet. However: having the capability to lock the debug interface is useful when building a volume programming jig. You can flash the program code, verify and then lock the debug interface so that the device cannot be read when it is deployed in the field. Change-Id: If2d562dfdb4b95519785a4395f755d9ae3d0cf12 Signed-off-by: Lieven Hollevoet <hollie@lika.be> Reviewed-on: http://openocd.zylin.com/3389 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05xmc4xxx: Fix error propagation for erase_check callbackAndreas Färber
If an error occurs during xmc4xxx_blank_check_memory() aka .erase_check, it would break out of the loop over flash sectors and return ERROR_OK. Instead return the error code so that tcl.c can notify the user. Change-Id: Ie2c1b7933eef2b240b28f8a292634fbbf5b31706 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3425 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05fm4: Set read callbackAndreas Färber
Fix a segfault for flash read_bank by adopting the default read implementation. Change-Id: I09e030d9a7669b848a1743aaba03875bf408c7ee Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3431 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05at91samd: Add additional "B Variant" parts from SAMD21 familyPeter D. Gray
The parts are listed in Rev I of the Datasheet Change-Id: Icdd9108a0f1f19f666fce79de7f25df9f46de866 Signed-off-by: Peter D. Gray <peter@conalgo.com> Reviewed-on: http://openocd.zylin.com/3424 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2016-05-05flash/nor: Add Infineon XMC1000 flash driverAndreas Färber
The XMC1000 family uses a very different flash interface from XMC4000. Tested on XMC 2Go and XMC1100 Boot Kit. Change-Id: I3edaed420ef1c0fb89fdf221022c8b04163d41b3 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3418 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2016-05-05at91samd: Atmel SAML22 (segment LCD) family addedTomas Vanek
Part IDs taken from Atmel-42402C-SAM L22_Datasheet_Complete-01/2016 (revision C) Change-Id: I1eb76a92097a8327da10faa0551e7fc962a549f8 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3426 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05flash Kinetis: new KVx family addedTomas Vanek
Cortex-M0+ and M4 motor control MCUs KV10, KV11, KV30, KV31, KV42, KV44 and KV46 added to SDID identification. Watchdog disable code changed to work on Cortex-M0+ (KV1x) Protection size set to 1K for 16K flash devices (KV10Z16) - cherry picked from Andrey Smirnov's change #2051 Change-Id: Ia6f4868eaf7e2cb6ad6a736210c703a67e0027be Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3235 Tested-by: jenkins Reviewed-by: Kyle Manna <kyle.manna@fuel7.com> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-05Add support for Atmel AT91SAMD21E16B (B variant) and a spelling mistake.Peter D. Gray
Change-Id: I55ab830aed34a02c53f3419facc81c7354368e30 Signed-off-by: Peter D. Gray <peter@conalgo.com> Reviewed-on: http://openocd.zylin.com/3422 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-by: Andreas Färber <afaerber@suse.de>
2016-05-05flash/nor: Reorder drivers alphabeticallyAndreas Färber
To avoid conflicts between flash drivers being added, consistently use an alphabetical sort order for the three places new drivers get added: * Makefile.am NOR_DRIVERS (note: automake disallows a trailing backslash) * drivers.c struct flash_driver forward declarations * drivers.c flash_drivers array Change-Id: Idcd6a8e12821ef10958a6b3ad7bac0dc63cadd08 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3417 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-04stm32lx: Add support for lock/unlock (RDP Level 0<->1)Andreas Fritiofson
Change-Id: Iecc356373e084056d048d92820062483cac3c8ec Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/3234 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2016-05-04stm32f2x.c: Add more F4 devices.Uwe Bonnes
Taken from git://git.ac6.fr/openocd commit e8ed67c42227b7072 STM32F446 (0x434) now is's own case. Change-Id: I5061db7102b4c923c9f39d3d2f0cc69d29fca0a4 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3375 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-04src/flash/nor/stm32f2x.c: Really erase second bank if requested.Uwe Bonnes
Taken from git://git.ac6.fr/openocd commit e8ed67c42227b7072 Change-Id: Ic7f529aecd1603b8c083c3c9ce96a0f13dd604e0 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3374 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-05-04 stm32l4x.c: Correct waiting for data.Uwe Bonnes
Old code waited only for 7 bytes and didn't handle buffer wrap-around, but was functional despite. Change-Id: Iceaf7be1e51368b2ec0a8722cc9ac16d12f9aa63 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3140 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-05-04stm32l4x.c: Use explicit 64-bit flash access as reference manual implies.Uwe Bonnes
Change-Id: I87b540c1ee7158a9d697e9fbc845a603c6bbe74d Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3139 Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Tested-by: jenkins
2016-05-04flash: Added support for Freescale Kinetis KE family.Ivan Meleca
Tested with MKE04Z8VTG4, MKE02Z64VLC4 and MKE02Z64VLD2. Change-Id: I606e32a2746a3b96d3e50f3656ba78d40c41c1ea Signed-off-by: Ivan Meleca <ivan@artekit.eu> Reviewed-on: http://openocd.zylin.com/3380 Tested-by: jenkins Reviewed-by: Tomas Vanek <vanekt@fbl.cz>
2016-05-04stm32l4x.c: Free r6/7 for 64-bit operations.Uwe Bonnes
Use r5 instead of r7. Change-Id: I350d00eeabe9446d64dba8f1dbffb5d4beab7dd6 Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3138 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-04-06flash Kinetis: remove TARGET_HALTED halted check from probeTomas Vanek
There is no reason why not probe running target. Initial gdb connect to running target is now possible without halt in gdb-attach event. Change-Id: Iacc4a231587d378168b18db871582f1086504831 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3382 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29helper/fileio: Remove nested structMarc Schink
Change-Id: I1a3afbddcf950689da58e0df8850a05f558d7879 Signed-off-by: Marc Schink <openocd-dev@marcschink.de> Reviewed-on: http://openocd.zylin.com/3222 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29fm4: Add support for S6E2DH familyAndreas Färber
Add support for S6E2DH MainFlash. VFlash is not implemented. Briefly tested with SK-FM4-176L-S6E2DH V110 board. Change-Id: If7c523d8c75307bc1494bbf4cca3eed0272e8e01 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3158 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29fm4: Add support for MB9BFx64/x65Andreas Färber
These appear to be just additional flash size configurations. Entirely based on manual, untested. Change-Id: I4460dc1a588335df8fc0a385d24513a4e35b6951 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3157 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29flash: nor: mdr: implement read/verify for Info memoryPaul Fertser
This adds necessary code to obtain data from the Info region which is not memory-mapped so can't be read the usual way. With this "flash read_bank" and "flash verify_bank" commands should start to work as expected for the Info memory block. Change-Id: I57e4b80fff577500cfa85954b625fe9c9ff92aa5 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/3227 Tested-by: jenkins Reviewed-by: Eldar Khayrullin <eldar.khayrullin@mail.ru> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29xmc4xxx: Integrate build of erase check codeAndreas Färber
Instead of pointing to the assembler sources in a comment and inline-commenting the THUMB bytecode, place the hex array alongside the assembler sources and include it via preprocessor. Originally inspired by a typo in the file path during driver development, but it also facilitates making changes to the assembler sources. A Makefile is provided to help automate updating the bytecode. It is not integrated with the automake system to avoid forcing an ARM cross-compiler onto every user, i.e. after modifying the sources they need to be rebuilt in that directory before building the usual way. ARM_CROSS_COMPILE= can be passed on the make command line to deal with native ARM toolchains or with varying prefixes of cross-toolchains. Change-Id: I00ceb980a68c8554a180dd13719ac77b677a8bcd Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3133 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-29flash: New Spansion FM4 flash driverAndreas Färber
The Spansion FM4 family of microcontrollers does not offer a way to identify the chip model nor the flash size, except for Dual Flash vs. regular layout. Therefore the family is passed as argument and wildcard-matched - MB9BFx6x and S6E2CC families are supported. Iterations showed that ... 1) Just doing the flash command sequence from SRAM loader code for each half-word took 20 minutes for an 8 KB block. 2) Doing the busy-wait in the loader merely reduced the time to 19 minutes. 3) Significant performance gains were achieved by looping in loader code rather than in OpenOCD and by maximizing the batch size across sectors, getting us down to ~2 seconds for 8 KB and ~2.5 minutes for 1.1 MB. (Tested with SK-FM4-176L-S6E2CC-ETH v11, CMSIS-DAP v23.) gcc, objcopy -Obinary and bin2char.sh are used for automating the integration of hand-written assembler snippets. Change-Id: I092c81074662534f50b71b91d54eb8e0098fec76 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/2190 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29at91sam4 Flash: Added identification of atsam4n'sColin Helliwell
The Flash driver for at91sam4 cpu's has been enhanced to recognise and support the SAM4N family. Change-Id: I50c471a6053b52edffd8efdd8abfe516cc5c55ee Signed-off-by: Colin Helliwell <colin.helliwell@ln-systems.com> Reviewed-on: http://openocd.zylin.com/3242 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-29stm32lx.c: Print device string as info.Uwe Bonnes
Change-Id: I893f0d9a5095a9f122adc76cf403277639fa880c Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3362 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29stm32lx.c: Add STM32L0 categories 1, 2 and 5.Uwe Bonnes
Change-Id: I493072a856a66e4cd60de490a0937287db4b5c4d Signed-off-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-on: http://openocd.zylin.com/3360 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/faux.c: fixing check for failed mallocAlexander Kurz
Error found by static code analysis using the semantic pattern null_ref2/mini_null_ref2.cocci, see coccinellery.org Change-Id: Ic817c29f0ccf2b41fc8f7d9a480ad30d6e5b7ab8 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3364 Tested-by: jenkins Reviewed-by: Uwe Bonnes <bon@elektron.ikp.physik.tu-darmstadt.de> Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/stellaris: fix: flash info RCC and RCC2 mixed upAlexander Kurz
The flash info command on stellaris platformes "TI/LMI Stellaris information ... rcc is ..., rcc2 is ..." presented the actual RCC2 register as rcc and an uninitialized variable as rcc2 due to a copy and paste error. Found using the semantic pattern da/da.cocci, see coccinellery.org Change-Id: I6f920fc3e07fdc085ea8e2248fbc9453eb8393dc Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3368 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29flash/nor/non_cfi.c: cleanup, member double-intializationAlexander Kurz
A struct member has been initialized twice. Found using the semantic pattern da/da.cocci, see coccinellery.org Change-Id: I0320afd60f1ba505758cc5bc0adcf27f572492fb Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3369 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29Cleanup: removal of obsolete semicolonsAlexander Kurz
Obsolete C source code semicolons were removed using the semantic patch semicolon/semicolon.cocci, see coccinellery.org Change-Id: I153b4995a9e028ebaf5f58c947821dc78345a777 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3367 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-29cfi intel: fixing faulty flash write error messageAlexander Kurz
Writing to Intel CFI flash with unaligned tail bytes raised a false error message although all data was programmed successfully. e.g.: > flash write_image image 0x602e0000 bin > Programming at 0x602e0000, count 0x00000002 bytes remaining > couldn't write word at base 0x60000000, address 0x602e0000 > error writing to flash at address 0x60000000 at offset 0x002e0000 Root cause for this false error was a mixup of two result variables introduced with ecc8041c. Change-Id: Ib6b85293dbed946a36a307e5b198c47b901145bf Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3233 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2016-02-27nrf51: move hwid 0057 and add 0058Peter A. Bigot
Chip markings: N51822 / QFAAG2 / 1435CZ for HWID 0057 N51822 / QFAAG3 / 1436AJ for HWID 0058 Change-Id: I242b94d6a2362aae0de970c7ac77811c76dacdc0 Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3187 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-27nrf51: move table entry for hwid 0084 to correct MCU sectionPeter A. Bigot
This is a nRF51822 variant, not a nRF51422 variant. Change-Id: Ia199e0afa39408d7391a9655bad47eba2fd85f14 Signed-off-by: Peter A. Bigot <pab@pabigot.com> Reviewed-on: http://openocd.zylin.com/3105 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2016-02-23xmc4xxx: Add XMC4700 supportAndreas Färber
Tested with EES-AA revision chips on Relax Kit for 5V Shields and Relax Lite Kit. Change-Id: I17d4479657bad0516d4c10c2ad7e745d59e678b7 Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-on: http://openocd.zylin.com/3136 Tested-by: jenkins Reviewed-by: Jeff Ciesielski <jeffciesielski@gmail.com> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2016-02-15Kinetis: check/switch run mode before flash operationTomas Vanek
FTFx flash controller requires MCU in normal RUN mode. Flash cannot be erased, programmed or blank checked in VLPR or HSRUN modes. VLPR mode is switched to RUN mode as it does not require any changes in clock generator setting. VLPR can be active from reset on some KLx devices (with some FOPT setting) so 'reset init' might not be sufficient to get device to normal RUN. Any other mode than RUN or VLPR is reported as an error. Change-Id: I60f494ce0d534b04870c6219d9b05f66f7244433 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/3012 Tested-by: jenkins
2016-02-15Kinetis: invalidate flash cache after erase/writeTomas Vanek
Cached old flash contents broke verify readback on Kx devices. Change-Id: I0effaf358f451b473f0d9c762a133ffd21bc64b4 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2993 Tested-by: jenkins
2016-02-15Kinetis: improve flash detection using SIM_FCFG2 MAXADDR0 and MAXADDR1Tomas Vanek
Autodetect 1 or 2 flash blocks devices and recheck bank sizes. Correct pf_size calculation for 2 MB devices. Change-Id: Ib3b68db9ec5356b8d5dc73c9f12053f7476bf474 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2992 Tested-by: jenkins
2016-02-15Kinetis: nvm_partition commandTomas Vanek
Command for partitioning FlexNVM to data flash and EEPROM blocks Change-Id: Ia0ea65d72b0e5f23da330520284b0bd26435e444 Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2991 Tested-by: jenkins
2016-02-15Kinetis: fix preparation of FlexRAM before flash programmingTomas Vanek
FlexRAM should be requested before any section programming. Test FCNFG RAMRDY bit before issuing FTFx_CMD_SETFLEXRAM to speed up operation and to cover pflash only devices. Change-Id: Ib0f2d8e8ab8b1507cbf2b7f8565178ab79941f5d Signed-off-by: Tomas Vanek <vanekt@fbl.cz> Reviewed-on: http://openocd.zylin.com/2990 Tested-by: jenkins
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-17 09:32:46 +0000