aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor/em357.c
AgeCommit message (Collapse)Author
2016-02-29Cleanup: removal of obsolete semicolonsAlexander Kurz
Obsolete C source code semicolons were removed using the semantic patch semicolon/semicolon.cocci, see coccinellery.org Change-Id: I153b4995a9e028ebaf5f58c947821dc78345a777 Signed-off-by: Alexander Kurz <akurz@blala.de> Reviewed-on: http://openocd.zylin.com/3367 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2014-03-17flash: Constify write bufferAndreas Fritiofson
Change-Id: Ic812098d3ed5a2992c26bb57d08ae350e2c5d5d8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2040 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Remove unnecessary castsAndreas Fritiofson
Change-Id: Ia97283707282ccccdc707c969f59337313b4e291 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-03flash/nor: Make info function optionalAndreas Fritiofson
Remove lots of no-op or dummy info function implementations and check if it's implemented before invoking it. Change-Id: I2144dad6a84a80359bb13a8a29a4614387e4c135 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1642 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-04-17topic: STM32W support added to em357 driverBen Nahill
The em357 driver only supported one page configuration (192k in 96 2048k) pages. This is fine for em357 chips since that's the size they have, but ST's STM32W chips (pretty much the same) have different flash configurations available (64, 128, 192, 256k). I can't find anywhere that would indicate the size of the chip anywhere in memory so the selection must be manual, using the 'size' parameter. For backwards compatibility, any size not known to be in use defaults to the 192k configuration. I don't have any em357 devices to test, but I also found that I had to re-assert the FPEC clock enable before performing an erase. This is a single line and shouldn't break any configurations. My testing so far has only been with a 64k device with 8k of RAM. Change-Id: Ic0ac400a9696efaa09d1407dd4a4d456bc2c318b Signed-off-by: Ben Nahill <bnahill@gmail.com> Reviewed-on: http://openocd.zylin.com/1336 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2013-02-02armv7m: use ARM_MODE_THREAD core mode for algoorithm'sSpencer Oliver
This makes sure we are using privileged mode when executing any loaders. Change-Id: I18bf32ec92e1c76a66ab25e3712652bc3650b332 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1108 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2013-02-02armv7m: use generic arm::core_modeSpencer Oliver
To simplify things change over to using the generic core_mode struct rather than maintaining a armv7m specific one. Change-Id: Ibf32b785d896fef4f33307fabe0d8eb266f7086f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/966 Tested-by: jenkins Reviewed-by: Andreas Fritiofson <andreas.fritiofson@gmail.com>
2012-10-08flash/nor: make all working area pointers localAndreas Fritiofson
Working area pointers shouldn't be re-used, so there's no point in storing them in the flash bank struct. Make all such pointers local. Change-Id: Iab65b4e8b475fed7fc72fb8928f54590fa69d260 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/865 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-14flash: blank check use default_flash_blank_checkSpencer Oliver
Use default_flash_blank_check, this will use the much faster blank_check_memory handler if supported - 15x quicker on stm32f4. Otherwise it will fall back to using the slower default_flash_mem_blank_check. Change-Id: Ia231b3e95468c9e92594dbdbe1fa2d69e1506fc3 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/632 Tested-by: jenkins
2012-02-06build: cleanup src/flash/nor directorySpencer Oliver
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins
2012-01-12cmd: add missing usage varSpencer Oliver
Change-Id: I0f05d643b0801b19cc3beb88f0d12d7e4c83ef9c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/356 Tested-by: jenkins
2012-01-04Change return value on error.Mathias K
On wrong parameters a error is signalized to the calling function. Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by: Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-11-09em357: fix warning by removing unused local variablesØyvind Harboe
Change-Id: I9def63d36ed4fa8bf9cdeeedc18b1b25d0e487d6 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/184 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-06-04Fix "unused variable" warnings (errors) detected with GCC 4.7.0 - trivial fixesFreddie Chopin
2011-01-14Flash driver for em357Erik Botö
Hi, I took the stm32x NOR flash driver and adapted it for the Ember EM357 chip. This chip is very similar to em351 and stm32w so the driver should be easily extended to support those as well if anyone can get their hands on some of those for testing. changelog: Added NOR flash driver em357 Best regards, Erik Botö