aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor/cfi.c
AgeCommit message (Collapse)Author
2012-05-14cfi: check supported archSpencer Oliver
check that the cfi driver supports the current target arch. Change-Id: I8a95908684de67bf1657d1956f2573662a641cc1 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/614 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org>
2012-05-14build: use generic name for arm_algorithm varsSpencer Oliver
This makes the code a bit easier to read as arm_algorithm can refer to other arch's, not just armv4_5. Change-Id: I78c99d40f34cda04e06f2daee75b48ff40a1d23d Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/613 Tested-by: jenkins Reviewed-by: Aurelien Jacobs <aurel@gnuage.org> Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-02-06build: cleanup src/flash/nor directorySpencer Oliver
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins
2012-01-04Change return value on error.Mathias K
On wrong parameters a error is signalized to the calling function. Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by: Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-11-04cfi: fix gaffe in fixing warningsØyvind Harboe
introduced reading garbage value for arm32. Change-Id: Ib5792a8a3207ee4db6d01d354df98c3cfabce037 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/162 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-31cfi: unsupported code paths now report and return errorØyvind Harboe
found by clang, would have done something undefined and mysterious later on. Change-Id: If7d7aca8514575d229ed0b17378bf8b1bbf347c4 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/133 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-23FLASH/CFI: fix clang warningsAntonio Borneo
Total of 5 warnings: 3x "Dead store": removed dead assignment to variable; 1x "Dereference of null pointer": this is not an error, but a limited visibility of clang, since pointer erase_region_info is initialized inside cfi_fixup_non_cfi(); 1x "Branch condition evaluates to a garbage value": this is a real coding bug that could issue SIGSEGV, since "goto cleanup" can be executed before initialization of "source". Change-Id: Id3c323c82bb15cbd3bb8fc04b23541f11145f109 Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Reviewed-on: http://openocd.zylin.com/84 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-08-24non_cfi: add SST39WF1601 supportAndreas Bießmann
Invented by jknick in sparkfun forum: http://forum.sparkfun.com/viewtopic.php?t=19788 Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
2011-08-18cfi: add EN29LV800BB supportGunnar Henne
Posted by telekatz@gmx.de in the bettyhacks forum for openocd 0.4.0 and integrated into 0.5.0 by Gunnar Henne. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-08-09flash/nor/cfi: fix TopBottom for atmel chipsAndreas Bießmann
There are some older atmel nor chips which have negated logic for TopBottom detection. This patch adds a special handling for the old chips. This is the same mechanism as implemented in linux kernel. Signed-off-by: Andreas Bießmann <andreas.devel@gmail.com>
2011-06-05mips: add nor flash write from memory blockStefan Mahr
2011-04-27cfi: leave check on whether target is running to target_write_memory()Øyvind Harboe
there was a check in clearing the status register that called exit() if the target was running. target_write_memory() has such a check and will report the error correctly. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-31cfi: use ARM32 machine code on all CPUs but Cortex M3Øyvind Harboe
ARM11 broke with aa61a3b3d8b6acad19050987835ec05f3d298bdb as the code only checked for arm 7/9. CFI probably needs work for non-ARM targets but perhaps not adding working area memory to e.g. MIPS will give the default slow CFI support. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-10cfi: fix release build warningsSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06cfi: use safer arch detectionSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-06Add the support for the armv7m arch.Jonathan Dumaresq
Signed-off-by: Jonathan Dumaresq <jdumaresq@cimeq.qc.ca>
2011-01-02cfi_protect is not implemented on Spansion flashes (many do not even have ↵Michael Schwingen
protection bits). Demote from error to warning, so that common board code can use "flash write_image erase unlock" regardless of the flash type. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2011-01-02non-CFI flash code uses data from CFI structures. Make sure that timeouts ↵Michael Schwingen
are filled in on non-CFI flashes, and print CFI information in all cases, nut just on CFI flashes. Signed-off-by: Michael Schwingen <michael@schwingen.org>
2010-12-10contrib: add source to the cfi flash loadersSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: disable buffer writes for M29W128GSpencer Oliver
For some reason buffer writes for the M29W128G do not work reliably, so disable them. See: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=504a3e72208fc6a65924426ff5693982590bccdc Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: allow optional buffer write supportSpencer Oliver
Some flash's do not support buffer writes, so we now check they are supported before trying to use them. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: calculate correct timeoutsSpencer Oliver
The existing code used incorrect timeout values for the various cfi operations. We now calculate the timeouts and convert to msecs if necessary. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: prefix string hex outputSpencer Oliver
Add hex prefix so we know output is not decimal. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: add time format to cfi query outputSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-12-10cfi: whitespace and long line cleanupSpencer Oliver
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-09-15cfi: add sst39vf6401bFlemming Futtrup
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-11cfi: tighten up type usage a bitØyvind Harboe
sizeof() is a bit less scary than seing assumption about size of type, no bug as such. Use NULL instead of 0 for pointers. More obvious that it is a pointer from code inspection. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-03Numonyx M29W160ET patchWookey
Someone called David Carne popped up on IRC and offered a fix (as he's not on this list so can;t post here). I am just passing it on. (thanx David) 10:54 < davidc__> Basically; the Numonyx M29W160ET has an incorrect CFI PRI block; it describes the erase blocks backwards 10:54 < davidc__> the linked patch has a fixup for that part [really trivial]:
2010-06-14cfi: add LOG_ERROR() in case of unsupported intel erase algorithmØyvind Harboe
found by code inspection. There are many other places in CFI where LOG_ERROR() should be called similarly... Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-14flash: fix bug in error propagation of flash write_imageØyvind Harboe
when a write/unlock/erase failed during write_image, then an error was not propagated back up so e.g. flash write image from tcl scripts would not throw an exception. Also flash filling speed was printed even when the operation failed. Output is now less confusing. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-14cfi: fix gaffe introduced in previous versionØyvind Harboe
flash probe broke w/in last commit. ecc8041c0f4c30a7310c0f8414a5261ee7a090ca Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-11cfi: fix error propagationØyvind Harboe
any read/write operation to memory can fail. block write algorithm error propagation was broken in that it would continue after an error was reported writing data to ram or the algorithm failing. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-08cfi: fix GDB keep alive bugØyvind Harboe
Long running CFI writes could cause GDB timeout. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-26NOR/CFI: fix memory leak; check malloc return valueAntonio Borneo
Every time command "flash probe #" is executed, memory structures are re-allocated without preventive free() of former areas, causing memory leak. Also, memory allocation does not check return value, determining segmentation fault in case of out of memory. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-16NOR/CFI: minor code cleanupAntonio Borneo
Remove few LOG_DEBUG() messages, together with code and variables required to build such messages. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: add cfi_read() implementationAntonio Borneo
Final step to force bus_width size during CFI flash read. Added CFI specific implementation cfi_read() that uses only accesses at bus_width size. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR: add read() callback to struct flash_driverAntonio Borneo
Final target is to force bus_width size during CFI flash read. In this first step I need to replace default flash read with flash specific implementation. This patch introduces: - flash_driver_read() layer; - default_flash_read(), backward compatible; - read() callback in struct flash_driver; - proper initialization in every flash_driver instance. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: remove use of cfi_add_byte()Antonio Borneo
Remove the function cfi_add_byte() and rewrite the only instance of it. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: use bus_width for memory access in cfi_write()Antonio Borneo
During cfi_write(), head and tail of destination area could be not aligned to bus_width. Since write operation must be at bus_width size, source buffer size is extended and buffer padded with current values read from flash. Force using bus_width to read current value from flash. Do not use cfi_add_byte() anymore, to allow removing this function later on. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: use bus_width for memory access on flash ID.Antonio Borneo
NOR flash structure requires each access to be bus_width wide. Fix read of flash ID accordingly to rule above. Add case (chip_width == 4), allowed by CFI spec and coherent with current value of CFI_MAX_CHIP_WIDTH but currently not used by any target. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: identify memory accesses not using "bus_width".Antonio Borneo
Since NOR flash devices does not handle "byte enable lanes", each read/write access involves the whole "chip_width". When multiple devices are in parallel, usually all chips are enabled during each access. All such cases are compatible with flash accesses at "bus_width" size. Access at "bus_width" size is mandatory for write access to avoid transferring of garbage values to flash. During read access the flash controller should take care, and discard unneeded bytes. Anyway, it is good practice to use "bus_width" size also for read. Every memory access that does not respect "bus_width" size is marked with a "FIXME" comment. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: simplify bufferwsize computationAntonio Borneo
Review and simplify computation of bufferwsize. Add comments about variables' meaning. The same code is present 3 times in the file. Current patch updates all the 3 instances. Step 1) Replace "switch(bank->chip_width) {...}". Illegal values of bank->chip_width are already dropped. For legal values, the code is equivalent to: bufferwsize = buffersize / bank->chip_width; Step 2) The above code replacement plus the following line: bufferwsize /= (bank->bus_width / bank->chip_width); is merged in a single formula: bufferwsize = (buffersize / bank->chip_width) / (bank->bus_width / bank->chip_width); and simplified as: bufferwsize = buffersize / bank->bus_width; Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR/CFI: check "flash bank" command argumentsAntonio Borneo
Arguments chip_width and bus_width of command "flash bank" are not fully checked. While bus_width is later on redundantly checked in several other parts (e.g. in cfi_command_val()) and generates run-time error, chip_width is never checked, nor related to actual bus_width value. Added check to avoid: - (chip_width == 0), that would mean no memory chip at all, avoiding also division by zero e.g. in cfi_get_u8(); - (bus_width == 0), that would mean no bus at all; - unsupported cases of chip_width or bus_width value not power of 2; - unsupported case of chip width wider than bus. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-11Fujitsu MBM29SL800TE flash supportKarl Kurbjun
Hi, This is my first post to the list. First, I would like to thank everyone for their work on OpenOCD, it is a great tool to work with. I have been using it to debug code on hardware for the Rockbox project (www.rockbox.org). The target that I primarily work with has a Spansion/Fujitsu NOR flash (MBM29SL800TE). I attached a patch that adds support for this flash. I hope it can be included in the main repository. If there is something that needs to be changed with the patch before inclusion please let me know. -Karl Kurbjun
2010-05-10cfi: add Numonyx M29W128G reset workaroundSpencer Oliver
The ST/Numonix M29W128G has an issue when a 0xff cmd is sent, it cause an internal undefined state. The workaround according to the Numonyx is to send another 0xf0 reset cmd Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-05-05flash: stop caching protection stateØyvind Harboe
There are a million reasons why cached protection state might be stale: power cycling of target, reset, code executing on the target, etc. The "flash protect_check" command is now gone. This is *always* executed when running a "flash info". As a bonus for more a more robust approach, lots of code could be deleted. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-05cfi: fix error handling for protect fnØyvind Harboe
No error was propagated. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-04flash: less bogus errorsØyvind Harboe
Removed bogus errors when trying to allocate a large a target memory buffer as possible. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-04cfi: made som info output debug outputØyvind Harboe
E.g. how much target memory that is used during flashing is debug info. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-15NOR/CFI: remove redundant codeAntonio Borneo
Arguments for "flash bank" command are already parsed and put in "bank" struct. Removed code to parse them again. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 06:51:49 +0000