aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nor/at91sam3.c
AgeCommit message (Collapse)Author
2014-04-08flash/nor/at91sam3: remove sam3_page_write_opcodesPaul Fertser
Apparently this helper was never actually used, and current clang produces an unused const variable warning, so it's breaking the build. Change-Id: Ib088bef5e9c0a48942c1d417d46f738469ee7e28 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/2076 Tested-by: jenkins Reviewed-by: Xiaofan <xiaofanc@gmail.com>
2014-03-29Support for sam3n0a sam3n0b sam3n00a sam3n00bAndreas Fritiofson
Change-Id: I70a04f5f9b0b20d42a677ea8781130e44be758d3 Signed-off-by: Stefan Arnold <sarnold@sh-sw.de> Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2042 Tested-by: jenkins Reviewed-by: Stian Skjelstad <stian@nixia.no> Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2014-03-17flash: Constify write bufferAndreas Fritiofson
Change-Id: Ic812098d3ed5a2992c26bb57d08ae350e2c5d5d8 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/2040 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Remove unnecessary castsAndreas Fritiofson
Change-Id: Ia97283707282ccccdc707c969f59337313b4e291 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1767 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-31Clean up many C99 integer types format specifiersPaul Fertser
This eliminates most of the warnings reported when building for arm-none-eabi (newlib). Hsiangkai, there're many similar warnings left in your nds32 files, I didn't have the nerve to clean them all, probably you could pick it up. Change-Id: Id3bbe2ed2e3f1396290e55bea4c45068165a4810 Signed-off-by: Paul Fertser <fercerpav@gmail.com> Reviewed-on: http://openocd.zylin.com/1674 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-10-03flash/nor: Make info function optionalAndreas Fritiofson
Remove lots of no-op or dummy info function implementations and check if it's implemented before invoking it. Change-Id: I2144dad6a84a80359bb13a8a29a4614387e4c135 Signed-off-by: Andreas Fritiofson <andreas.fritiofson@gmail.com> Reviewed-on: http://openocd.zylin.com/1642 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01at91sam3: Added support for at91sam3s8a, b and cUlf Wetzker
Only the support for at91sam3s8b is tested on real hardware. Change-Id: I4ce23bc2f6131d9cf3ff1b301ab9e470d20845ab Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1424 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01at91sam3: Added support for at91sam3sd8a and bUlf Wetzker
This update is untested due to missing hardware. Change-Id: Ibe286b741ebbb1c8ae0bd3dea4b8f3e12320ab34 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1423 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-07-01flash/nor/at91sam3: fixed lock region sizeUlf Wetzker
According to the "AT91SAM ARM-based Flash MCU SAM3S Series datasheet" (http://www.atmel.com/Images/doc11090s.pdf) p. 30 the lock region size for the at91sam3sd9 family is 32 kbyte. This fix is only based on the datasheet due to missing hardware. Change-Id: Ic47b0642e4f11a60de477eaa0167038103b8ff15 Signed-off-by: Ulf Wetzker <ulf.wetzker@eas.iis.fraunhofer.de> Reviewed-on: http://openocd.zylin.com/1422 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2013-06-05update files to correct FSF addressSpencer Oliver
Change-Id: I429f7fd51f77b0e7c86d7a7f110ca31afd76c173 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/1426 Tested-by: jenkins Reviewed-by: Paul Fertser <fercerpav@gmail.com>
2013-03-24at91sam3: Wrong PLLA frequency calculationsThomas Schmid
The command 'at91sam3 info' ignores PLLA DIV values >1. This patch fixes it. Tested on a SAM3S4C chip. Change-Id: I051f41bb3dcefe1ac785fbcb48477a807daa16a2 Signed-off-by: Thomas Schmid <thomas.schmid@gmail.com> Reviewed-on: http://openocd.zylin.com/1307 Tested-by: jenkins Reviewed-by: Peter Stuge <peter@stuge.se>
2012-10-17flash: fix at91sam3/4 driver typosSpencer Oliver
Change-Id: I06efdfcc48279b06035e9e173945304310054864 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/896 Tested-by: jenkins Reviewed-by: Olivier Schonken <olivier.schonken@gmail.com>
2012-09-07flash: fix sam3 page read/write address computation errorChuen Chou
In at91sam3.c for Atmel SAM3 flash support, there are arithmetic errors in the functions sam3_page_read() and sam3_page_write(). Address locations are computed incorrectly due to an extra addition operation. This leads to memory locations being skipped during flash writes and reads. Smaller programs are written successfully into flash, with memory gaps, while larger programs of legitimate size fail because the skipped memory is not utilized and therefore unavailable. The changes address this condition, and have been tested with an Atmel SAM3X-EK evaluation board. Change-Id: I9ea3b9ed0130b71cbc32b2294e31a6a2bc71b47a Signed-off-by: Chuen Chou <zhouquan27@gmail.com> Reviewed-on: http://openocd.zylin.com/806 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-06-26topic: flash: description/id added for ATSAM3SD8CMike Crowe
New flash description for ATSAM3SD8C used on SAM3S-EK2 development boards. Name used is "at91sam3sd8c" and chipid is 0x29ab0a60. Mirrors description of other similar parts. Change-Id: I7fc4b82e7969451645ab067223663f08b76d866b Signed-off-by: Mike Crowe <mpcrowe@gmail.com> Reviewed-on: http://openocd.zylin.com/684 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-05-04build: remove clang unused variable increments warningsSpencer Oliver
Change-Id: Ib755474aa46f7233495fae1947bc27cd0b2d6b4f Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/599 Tested-by: jenkins Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
2012-04-26SAM3X - Added support for at91sam3x8h-ES, fixed CIDR for ES2 and productionOlivier Schonken
The first available devkits for the at91sam3x8h had the ES device populated. The ES device had an error in the CIDR, specifically in the last byte of which the upper 3 bits identifies the chip family - cortex-m3, arm7tdmi etc. The problem was fixed on the ES2 devices - Thanks to Pat Hickey for giving me the heads-up. Change-Id: I13dd7fbe0cffaf76f948188c9459dc3cf4435570 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/575 Tested-by: jenkins Reviewed-by: Jim Norris <u17263@att.net> Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-13topic: Added support for the SAM3X/A variantsOlivier Schonken
Atmel introduced 7 new Cortex-M3 processors on 2012-02-28 SAM3X4C - 256KB flash SAM3X4E - 256KB flash SAM3X8C - 512KB flash SAM3X8E - 512KB flash SAM3X8H (Only on dev-kit - not in production...) - 512KB flash SAM3A4C - 256KB flash SAM3A8C - 256KB flash The SAM3X/A processors still suffer from the "6 waitstates needed to program device" errata. The CIDR address for the SAM3X/A processors are different from the other SAM3 processors. Unfortunately, the chip identification register is not at a constant address across all of the SAM3 series'. As a consequence, a simple heuristic is used to find where it's at... If the contents at the first address is zero, then we know that the second address is where the chip id register is. We can deduce this because for those SAM's that have the chip id @ 0x400e0940, the first address, 0x400e0740, is located in the memory map of the Power Management Controller (PMC). Furthermore, the address is not used by the PMC. So when read, the memory controller returns zero. Another interesting change is the flash bank address for flash bank 1. It is not fixed at 0x00100000 like the Sam3U. Bank 1 of the at91sam3a/x series starts at 0x00080000 + half the total flash size. Thus for the 256KB devices Bank 1 is located at 0x000A0000, and for the 512KB devices Bank 1 is located at 0x000C0000. The configuration files for the SAM3X/A processors will follow Change-Id: I6c3a707c00e05d993a2ad1d5a423f23b37ffd553 Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com> Reviewed-on: http://openocd.zylin.com/505 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Remove unused reference to SUPC registersAttila Kinali
The SUPC (Supply Controller) registers are on different base addresses on different SAM3 chips: SAM3U: 0x400e1210 SAM3N: 0x400e1410 SAM3S: 0x400e1410 This creates a problem with the sam3_reg_list array which is const, but would need to be changed at runtime to account for this variability. As this register is not used anywhere, it's simplest to just remove it. Change-Id: I987eb371648d826aa6d5e9de18d38c7bb66d6fca Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/495 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3: Add missing architecture names for SAM3S and SAM3NAttila Kinali
Change-Id: Ie2177487d4315219eb364db360cb7f88d2720783 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/494 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-03-06SAM3S: correct flash sector sizes.Attila Kinali
Lock region count and sector sizes did not match datasheet. (see 6500C-ATARM-8FE11 "SAM3S Series Datasheet", Table 7-1) Change-Id: Ic511802f96ed03856467a24a6736349205a0576a Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/493 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2012-02-29Fix assert to check flash programming offsetAttila Kinali
The assert introduced in 00c864835149a96b431fc8f31dd89542d88fd383 checks whether the programming offset equals to page_size of the flash, while it wants to check whether the offset is a multiple of the page_size. Change-Id: I794d021951a28c1cc520b5eea5d500f097721b06 Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/482 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com>
2012-02-06build: cleanup src/flash/nor directorySpencer Oliver
Change-Id: Ic299de969ce566282c055ba4dd8b94892c4c4311 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/420 Tested-by: jenkins
2012-01-12cmd: add missing usage varSpencer Oliver
Change-Id: I0f05d643b0801b19cc3beb88f0d12d7e4c83ef9c Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/356 Tested-by: jenkins
2012-01-12build: remove unused variablesSpencer Oliver
detected by clang. Change-Id: Id9effcc5437870f37fecd33803f7753c6eca53d6 Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/361 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Reviewed-by: Mathias Küster <kesmtp@freenet.de>
2012-01-04Change return value on error.Mathias K
On wrong parameters a error is signalized to the calling function. Change-Id: I484443fdb39938e20382edc9246d5ec546a5c960 Signed-off-by: Mathias K <kesmtp@freenet.de> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/282 Tested-by: jenkins Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-11-10Work around silicon bug in the SAM3 family flash waitstatesAttila Kinali
* Add flash waitstate support for Atmel SAM3 chips. * Set default waitstates to 6, to workaround a silicon bug in the SAM3 family This code has been tested on SAM3U4, SAM3N4 and SAM3N1 based on Change-Id: I477446f9bfb3e910ea3e2414a6e9a75beb14a214 by Jim Norris <u17263@att.net> Change-Id: I8d360080f6968979ca5e197ad638282cadd18fb7 Signed-off-by: Attila Kinali <attila@kinali.ch> Signed-off-by: Spencer Oliver <spen@spen-soft.co.uk> Reviewed-on: http://openocd.zylin.com/128 Tested-by: jenkins
2011-11-07at91sam3: fix warningsØyvind Harboe
- reduce scope of variables - assert on post condition to fix clang warning Change-Id: Id91038f73a632f9688ba52c9c34eae923626e770 Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com> Reviewed-on: http://openocd.zylin.com/160 Tested-by: jenkins Reviewed-by: Spencer Oliver <spen@spen-soft.co.uk>
2011-10-17Add the SAM3N familly to the chip_details tableAttila Kinali
Change-Id: Ic122d324eacf6e667ed6008ebb84708be944222c Signed-off-by: Attila Kinali <attila@kinali.ch> Reviewed-on: http://openocd.zylin.com/29 Reviewed-by: Øyvind Harboe <oyvindharboe@gmail.com> Tested-by: Øyvind Harboe <oyvindharboe@gmail.com>
2011-08-21Fix Sam3u flash bank 1 issueolivier Schonken
2011-03-30at91sam3: Modified cidr comparisson to ignore version bitsOlivier Schonken
production processor versions increment, thus the version bits should be ignored for future proofing. e.g. Engineering sample version == 0x00, production version 0x01
2011-03-17Fix a bunch of typos.Uwe Hermann
Fix a bunch of typos. Most are in code comments, so nothing should break. UNKOWN_COMMAND and CMD_UNKOWN are not used elsewhere, so correcting the spelling should also not break anything.
2011-01-26Fixed small mistakes in at91sam3 info commandThomas Schmid
Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2011-01-09nit: more LOG_* \n fixesEric Wetzel
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
2011-01-05nit: do not add \n at end of LOG_ERROREric Wetzel
Fixed in many other places, and submitted in response to Øyvind's invitation.
2010-12-29warning: fix warning where GCC didn't catch a doubly declared global structureØyvind Harboe
Why hasn't earlier versions of GCC caught this? Bug? Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-11-17FLASH/NOR: Remove useless file at91sam3.hAntonio Borneo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-09-20warnings: fix alignment warningsØyvind Harboe
These warnings are for architectures that do not support non-aligned word access. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-25at91sam3s* supportOlaf Lüke
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-17nor/at91sam3: replace helper membufAntonio Borneo
Helper ./src/helper/membuf.c is only used in at91sam3.c 1) Replace membuf with LOG_* 2) The original code in sam3_GetDetails() invalidates all the buffered output of sam3_GetInfo(). The new code skips sam3_GetInfo() if its output should not be printed. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-05-16NOR: add read() callback to struct flash_driverAntonio Borneo
Final target is to force bus_width size during CFI flash read. In this first step I need to replace default flash read with flash specific implementation. This patch introduces: - flash_driver_read() layer; - default_flash_read(), backward compatible; - read() callback in struct flash_driver; - proper initialization in every flash_driver instance. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-02-28ARMv7M: use software breakpoints for algorithmsSpencer Oliver
- armv7m_run_algorithm now requires all algorithms to use a software breakpoint at their exit address - updated all algorithms to support this Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-01-29NOR: cleanup driver declsDavid Brownell
Fix goofy struct indents. Function names *are* their addresses. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2010-01-09src/flash/nor: usage/help/doc updatesDavid Brownell
Make "usage" messages use the same EBNF as the User's Guide; no angle brackets. Improve and correct various helptexts. Don't use "&function"; a function's name is its address. Remove a couple instances of pointless whitespace; shrink a few overlong lines; fix some bad indents. Add TODO list entry re full support for NAND/NOR bank names. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
2009-12-04remove target.h from flash.hZachary T Welch
The flash.h header does not require the target.h header file, but its implementation source files do. Move it to flash/nor/imp.h.
2009-12-03change #include "flash.h" to <flash/flash.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "flash.h" the following form should be used. #include <flash/flash.h> The exception is from .c files in the same directory.
2009-12-03change #include "types.h" to <helper/types.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "types.h" the following form should be used. #include <helper/types.h> The exception is from .c files in the same directory.
2009-12-03change #include "time_support.h" to <helper/time_support.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "time_support.h" the following form should be used. #include <helper/time_support.h> The exception is from .c files in the same directory.
2009-12-03change #include "membuf.h" to <helper/membuf.h>Zachary T Welch
Changes from the flat namespace to heirarchical one. Instead of writing: #include "membuf.h" the following form should be used. #include <helper/membuf.h> The exception is from .c files in the same directory.
2009-12-02move nor drivers to src/flash/norZachary T Welch
Moves NOR flash drivers to 'src/flash/nor/'. Adds 'src/flash/nor/Makefile.am'. Builds 'libocdflashnor.la'.
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-19 19:38:34 +0000