aboutsummaryrefslogtreecommitdiff
path: root/src/flash/nand
AgeCommit message (Collapse)Author
2011-05-28Improve NAND flash detectionDamjan Marion
Detect based on both manufacturer id and chip id if manufacturer id is defined in table
2011-05-28Reorganize NAND flash tableDamjan Marion
- added manufacturer field - name moved to the end for better text alignment
2011-04-19Make the LPC32xx nand driver support up to 5 address cycles. This will only ↵Alexandre Pereira da Silva
work in the SLC driver.
2011-04-19Make the LPC32xx slc nand driver the defaultAlexandre Pereira da Silva
2011-03-30Clarify LPC32XX address cycles messageAlexandre Pereira da Silva
Hi, This is a more descriptive message about LPC32XX error, when the nand chip needs 5 address cycles. Thanks.
2011-03-30Add Micron 2GiB nandAlexandre Pereira da Silva
Hi, This will add support for a new nand chip device. Thanks.
2011-03-17Fix a bunch of typos.Uwe Hermann
Fix a bunch of typos. Most are in code comments, so nothing should break. UNKOWN_COMMAND and CMD_UNKOWN are not used elsewhere, so correcting the spelling should also not break anything.
2011-02-18fix compile error under MinGWSimonQian
2011-02-15lpc32xx: Flash driverBjarne Steinsbo
Based on the lpc3180 driver, but released as a separate driver for two reasons: 1) I don't have an lpc3180 to test it against, so it might unintentionally break compatibility. 2) It's using a different OOB layout than lpc3180. Rewritten so that it no longer borrows code from the NXP CDL library. Instead borrowing code from the u-boot port to lpc32xx, written by Kevin Wells. Tested on lpc3250 (Hitex LPC3250-Stick). OOB layout is compatible with LPCLinux.
2011-01-09nit: more LOG_* \n fixesEric Wetzel
Remove extra \n from LOG_DEBUG, LOG_INFO, and LOG_WARNING messages Remove LOG_INFO_N LOG_INFO_N was only used once and had a \n at the end Change LOG_USER_N calls that end with \n to LOG_USER
2011-01-05nit: do not add \n at end of LOG_ERROREric Wetzel
Fixed in many other places, and submitted in response to Øyvind's invitation.
2011-01-02NAND/S3CXXXX: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/ORION: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/NUC910: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/MX3: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/MX2: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/LPC3180: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/DAVINCI: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/AT91SAM9: remove private "target" copyAntonio Borneo
Remove "target" form private data, and use common one in struct nand_block. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/TCL: prepare for common "target" referenceAntonio Borneo
Every NAND driver keeps private copy of "target" structure. Prepare infostructure to move private "target" copy in common/shared struct nand_device. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/TCL: fix segfault on syntax errorAntonio Borneo
Fix segfault if incomplete command "nand device dummy" is executed. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/CORE: Comment use of alive_sleep()Antonio Borneo
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2011-01-02NAND/CORE: Replace decimal dot in messagesAntonio Borneo
Table of NAND devices reports operating voltage. Replace comma with proper decimal dot. Øyvind: "." is correct for UK/US, but incorrect for many other languages. OpenOCD is not localized at this point, so sticking to "." for US/UK should be OK. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2011-01-02flash/nand: review NAND driver interfaceAntonio Borneo
From struct nand_flash_controller : - remove unused field register_commands; - remove field controller_ready, exported but never referenced. Remove dead code pointed by controller_ready. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-12-29warnings: use more 'const' for char *Øyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-12-15Fix for segfault in handle_nand_dump_command.Paul Richards
2010-11-18build: add common.mkSpencer Oliver
Rather than specifying common makefile variables move them all to a common.mk. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-09-29fileio: fileio_size() can now failØyvind Harboe
Part of making the fileio API more robust. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-29fileio: refactor struct fileio to be an opaque structureØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-21flash: fix error handlingØyvind Harboe
sensible error must be reported at failure site Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-09-20warnings: fix alignment warningsØyvind Harboe
These warnings are for architectures that do not support non-aligned word access. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-07-19flash: add nuc910 nand driverSpencer Oliver
This adds a nand driver support for the nuc910 target. Note that ECC is not currently supported by this driver, although it is supported by the peripheral. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-07-19nand: nand probe also outputs manufacturerSpencer Oliver
The nand probe now outputs the manufacturer if found. Signed-off-by: Spencer Oliver <ntfreak@users.sourceforge.net>
2010-06-21nand/mx2: review scope of symbolsAntonio Borneo
Add "static" qualifier to private variable. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-06-16arm_io: -Wshadow warning fixØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-16nand: when verify failed, it didn't return an errorØyvind Harboe
when the verify failed, it didn't return an error, which breaks e.g. tcl scripts that rely on this for exceptions to work. Found by -Wshadow Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-06-14-Wshadow fixesØyvind Harboe
Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-20nand : Add Freescale iMX27 nand flash controller supportgcembed
This patch add support of iMX27 nand flash controller. This is based on driver for imx31 nand flash controller. OOB functionality is not fully working. As in mx31 controller, mx2 NFC has a bug that swap two bytes between SPARE and MAIN buffer. I used this driver for several months and no problems appear.
2010-05-18NAND/davinci: Fix segfault for hwecc4_infix readsJon Povey
Page reads using hwecc4_infix layout segfaulted for check_bad_blocks because the read assumed a valid data buffer, which check_bad_blocks does not use (it only passes a 6 byte buffer for the start of OOB). This version copes with undersized or missing data or oob buffers and uses random read commands within the page to skip unwanted areas of data/OOB for speed. NOTE: Running check_bad_blocks with this layout will be reading infix OOB locations, not manufacturer bad block markers. This means that if you check blocks written in infix layout they will appear good, but manufacturer- marked bad blocks may also appear good. If you want to scan for manufactuer-marked bad blocks, you need to enable raw_access before running check_bad_blocks, or use the non-infix layout. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> CC: David Brownell <dbrownell@users.sourceforge.net>
2010-05-18NAND: catch read errors when building BBTJon Povey
nand_build_bbt() was ignoring the return value from nand_read_page() and blindly continuing. It now passes the return value up to the caller if the read fails. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
2010-05-16Change kb/s to KiB/s in messages about kibibytesJon Povey
Change download rate messages about kibibytes from "kb/s" to "KiB/s" units. See: http://en.wikipedia.org/wiki/Data_rate_units Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk>
2010-05-14NAND: fix first and last handling in nand_build_bbtJon Povey
Last block was being skipped, fix by changing the loop test from "<" to "<=" First block argument was ignored, always started from block 0 (and counted the wrong blocks as bad if first was nonzero). Now we use it. Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-05-14NAND: fix off-by-one error in erase command argument rangeJon Povey
The last_block argument to nand_erase() is checked against nand->num_blocks, but the highest valid block number is (total - 1), the test for invalid should be ">=" rather than ">". Signed-off-by: Jon Povey <jon.povey@racelogic.co.uk> Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-04-10NAND/TCL: review scope of functionsAntonio Borneo
Add "static" qualifier to private functions. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-04-10NAND/ARM_IO: review scope of functionsAntonio Borneo
Add "static" qualifier to private functions. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-04-10NAND/CORE: review scope of functionsAntonio Borneo
Add "static" qualifier to private functions. Move function's comment from core.h to core.c. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-04-10NAND/MX3: review scope of dataAntonio Borneo
Add "static" qualifier to private data. Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
2010-03-25change %x and %d to PRIx32 and PRId32 where needed for cygwinDaniel Bäder
2010-03-16lpc3180: LPC3180(LPC3250) SLC driver implementedrichard vegh
Until this time only basic SLC functionality exists when you want to use SLC to access external nand flash. Basic functionality can be selected with command: lpc3180 select 0 slc It is anyway very slow to write/read to/from nand flash. With the new command, SLC speed improved about 20 times, and hardware ECC info also read/written from/to nand flash OOB area: lpc3180 select 0 slc bulk Speed improvement achieved by using working are in SRAM of the LPC3250 chip and controlling DMA controller to interact between SRAM and SLC peripheral. Here are the patches, and if they are ok than take them. Tested with hitex LPC3250 usb stick. Signed-off-by: Øyvind Harboe <oyvind.harboe@zylin.com>
2010-01-16NAND: lpc3180 crashes on LPC3250richard vegh
The LPC3180 NAND driver was crashing on some large page chips. Fix: - Crash and related functionality (don't memset too much OOB data) - Some debug messages - Command handling now works [dbrownell@users.sourceforge.net: whitespace/linelength/message cleanup] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
generated by cgit v1.2.3-18-g5258 (git 2.32.0) at 2024-10-16 18:50:19 +0000